Posted: 7/31/2026 8:01:56 AM EDT
[Last Edit: Striker][Edited]
|
Does it come with the exchange hot ends or do I need to order those too. My CEO signed off on me upgrading.  |
To say that you are on thin ice would be a vastly optimistic view of your current situation. The ice has melted. You are being supported by the surface tension of water.
|
Originally Posted By belted_guns: Excellent! Is this your 1st 3D printer? It does come with a set but I think you may want different sizes. Started with a PRUSA Mk4. I have 2 H1-C's now and will be selling one to cut down on the price of the H2C I have a .2mm hot end for my H1-C and it plugged up on me and I've tried to clean it numerous times. I ordered a new one but I have no plans to use it. |
To say that you are on thin ice would be a vastly optimistic view of your current situation. The ice has melted. You are being supported by the surface tension of water.
|
It comes with (4) 0.4 / (1) 0.2 / (1) 0.6 induction hotends and (2) 0.4 of "normal" hotends for the left nozzle. Don't forget to order 0.2 & 0.6 "normal" hotends for the left nozzle if you need that size, since both nozzles need to be the same size for any print that requires both nozzles. |
EP429: Today's lesson - Don't provoke ARFCOM. People will see your butthole.
|
Originally Posted By fox2008: It comes with (4) 0.4 / (1) 0.2 / (1) 0.6 induction hotends and (2) 0.4 of "normal" hotends for the left nozzle. Don't forget to order 0.2 & 0.6 "normal" hotends for the left nozzle if you need that size, since both nozzles need to be the same size for any print that requires both nozzles. Used it once and it got so plugged up I ruined it trying to clear it. I don't for see any reason for me using one again.. 
|
To say that you are on thin ice would be a vastly optimistic view of your current situation. The ice has melted. You are being supported by the surface tension of water.
| You need two 0.4 induction nozzles to complete the set and maximize the use of the quick change rack. I'm not sure why they didn't just send those instead of the single 0.2 and 0.6 that can't even be used in a multi nozzle operation out of the box since it only comes with 0.4 for the left side. Maybe eventually we will get a firmware update to allow mixing of nozzle sizes in the same print. |
|
Originally Posted By RRTX: You need two 0.4 induction nozzles to complete the set and maximize the use of the quick change rack. I'm not sure why they didn't just send those instead of the single 0.2 and 0.6 that can't even be used in a multi nozzle operation out of the box since it only comes with 0.4 for the left side. Maybe eventually we will get a firmware update to allow mixing of nozzle sizes in the same print. I can't see me ever using a .2 again.. |
To say that you are on thin ice would be a vastly optimistic view of your current situation. The ice has melted. You are being supported by the surface tension of water.