Posted: 8/30/2026 8:32:10 PM EDT
|
Anyone have one they can measure? I’m building a cabinet/stand and I want to make sure I leave enough room for it. Width is my main concern but I’ll take height and depth as well. |
|
Is it going to sit on top? Or be inside of something? You need 5" of clearance on the sides, back, and top of the unit for proper airflow and ventilation. That said, the unit itself is 20.1" wide, 16.5" deep, and about 12.5" tall. These are the published dimensions of the Cosori CO130-AO, which is the air fryer toaster oven the West3D modifies for usage as a filament dryer. |
|
I’m technically building a cabinet, that’s what I do for a living, but I was already going to leave all sides open with no obstructions so it had ample air flow around it. Printer is going to sit on top, shelf under it for the dryer, filament storage below. The only thing that is going to be enclosed is the bottom filament storage and I have not made my mind up on that either. Thanks for the specs, that will let me have it ready to roll when the dryer eventually gets here. |
|
Mine is 18.2" wide, 11.7" tall (including the feet), and roughly 12.8" deep including the handle on the door. Also make sure you're not overloading whatever circuit you put it on. Mine draws almost 7A when the heating element is on high. |
The hardest part about a zombie apocalypse will be pretending I'm not excited.
|
Originally Posted By thezentree: Mine is 18.2" wide, 11.7" tall (including the feet), and roughly 12.8" deep including the handle on the door. Also make sure you're not overloading whatever circuit you put it on. Mine draws almost 7A when the heating element is on high. Odd that the mfg lists such wildly different dimensions. Makes zero sense. 
|