Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
5/16/2026 6:46:47 PM EDT
[Last Edit: Morgan321][Edited]
Have a trek 4400 I bought over 20 years ago.  The sprockets are so worn that they slip in the chain if I pedal hard.  I know nothing about bikes, based on an hour reading online it looks like the below parts are all I need and they will fit my bike, can anybody confirm that?  

I’m a bit unsure about getting the cranks off, apparently they are square and tapered.  Can I remove the sprockets from the crank while it is on the bike and just replace the sprockets?  
I intend to only replace the front sprockets, but the whole assembly is cheaper than buying the 3 sprockets separately.  

Where to buy other than Amazon?  


random number 1 to 100
5/17/2026 12:15:57 AM EDT
[Last Edit: Anastasios][Edited] [#1]
And get a puller for square taper cranks.

How does the bottom bracket feel

Did you look at derailleur alignment

Did you try adjusting the shifters.
The man who cries out against evil men but does not pray for them will never know the grace of God.
-St. Silouan the Athonite
5/17/2026 3:37:04 PM EDT
[#2]
Quote History
Originally Posted By Anastasios:
And get a puller for square taper cranks.

How does the bottom bracket feel
View Quote
can the pedal sprockets be swapped without removing the crank?  

It’s tight.  Everything works fine, the gears are just heavily worn, one of the sprockets looks like just nubs.  So the chain slips.  
I read this is aggravated by a stretched chain, so I figured replace the chain also.  
5/17/2026 7:25:07 PM EDT
[#3]
Quote History
Originally Posted By Morgan321:
can the pedal sprockets be swapped without removing the crank?  

It’s tight.  Everything works fine, the gears are just heavily worn, one of the sprockets looks like just nubs.  So the chain slips.  
I read this is aggravated by a stretched chain, so I figured replace the chain also.  
View Quote View All Quotes
View All Quotes
Quote History
Originally Posted By Morgan321:
Originally Posted By Anastasios:
And get a puller for square taper cranks.

How does the bottom bracket feel
can the pedal sprockets be swapped without removing the crank?  

It’s tight.  Everything works fine, the gears are just heavily worn, one of the sprockets looks like just nubs.  So the chain slips.  
I read this is aggravated by a stretched chain, so I figured replace the chain also.  



100%. Replace it all.
.

Remember to kick it over, no one will guide you through armagideon time...

.
5/17/2026 8:00:59 PM EDT
[#4]
I looked at chainring prices. Buying 3 rings will cost more than the crank with rings.
The man who cries out against evil men but does not pray for them will never know the grace of God.
-St. Silouan the Athonite

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In