Deep-Sea Legends 2026-27 Student Project Thread-Update pg6 9/24 Mermaid Tail Curve fail (Page 7 of 7)
|
Originally Posted By guns762: +40 for expanding foam +120 for foam board +60 for dowels +280 Diver Helmet +35 Coveralls +150 for Van Dykes rock mix- 100lbs __________________________________________________________________________________ Total as of 9/16 $2190 Originally Posted By guns762: Originally Posted By guns762: Originally Posted By guns762: Originally Posted By guns762: Originally Posted By guns762: Update 8/24 I spent money for the first time this year, so I thought I would continue to let people know approximately how much this project has cost up to date. It went quick.....  + I ordered 5 gal of paint, rollers, trays= $300 + 2 sheets of foam  , 2 sheets of plywood, 7- 2x4s, 4- 2x2s, 5-1x2s= $300_____________________________________________________________________________ total as of 8/24/26 $600 + $215 to Amazon for male and female mannequins, hazmat suits _______________________________________________________________________________ total as of 8/26/26 $815.00 +150 for foam and 2x4s +100 for chicken wire and burlap + 50 for chicken wire ________________________________________________________________________________ Total as of 9/8 $1105 + 300 for 5 gal of glue, and 3 gal of paint +150 for foam and plywood ________________________________________________________________________________ Total as of 9/10 $1505 +40 for expanding foam +120 for foam board +60 for dowels +280 Diver Helmet +35 Coveralls +150 for Van Dykes rock mix- 100lbs __________________________________________________________________________________ Total as of 9/16 $2190 + $560 for various lighting for the project +80 for burlap +$150 for foam boards, 2x4s, and 1x2s +35 Expanding foam __________________________________________________________________________ Total as of 9/22 $3015.00 |
|
Originally Posted By guns762:  Little early for that. That wont be till Spring.  Oh good. I think I have like 4-5 years worth. I have to keep the rally going. My favorite is the smoke jumper one. What year was that? Prob 2022? |
What is a democrat? Someone who wants everything you have, except for your job.
Politicians should wear uniforms like NASCAR drivers so we could see their corporate sponsors.
Politicians should wear uniforms like NASCAR drivers so we could see their corporate sponsors.
|
Update 9/23 Pirate Cove- Ryan, Tayson, and Marco getting the last layers on the cove. We will begin adding rock mix in the next couple days.  Tiger Shark- Gisselle, Tallia, and Bailey fitting the sections of the body on the beam. Later in the day we decided we have some contour problems up front, and probably need to add some transition sections. Foam was delivered late, so we will start cutting those new sections today.  Earhart's crash site- The new notebooks got to the kids yesterday so we could branch off a bit with the project logs. The burlap is getting further along here.  F-4 Morgan and Beth working on getting the X and Y axis lines applied to the frames. We began cutting 1x2s yesterday that will clamp the frames on the main beam of our model.  Mermaid- Our mermaid is still going through skin tone changes. As the kids get further along, we are going back and reworking some areas, to add a bit more color variations. We had her down by the column so we could see how the coral formations would work with her attached to it.  More examples of how we are playing with making some of the linear coral formations.  We cut (a)  hole in the back of the neck of our mermaid to access her head, but after opening it up, we had to put a new one a bit higher in the skull. We need access to the eyes.  Hailey working on painting the backside of our mermaid.  Not sure I like how much green went away, but this is where we are with paiting.   Mermaid's tail- Emma, Gianreye, and Carter drilling holes in the tail for support. We will use 3 dowels to keep it rotating on the center dowel.  And then the bit came out inside the tail........  . Landon M working with forceps to get ahold of the bit.  It was in there further than they thought.....gravity didn't help. They eventually used a flashlight to find the end, and came in from the side, near the spray foam, and could pull it down with the forceps enough to get it loose.  Zip ties for the win!!!!  Adding foam over the top to transition to the tail fins.  |
We did a prelim fit of the tail to the body, and around the column today. The tail sticks out about 3/4 of the way into the hallway.  Last couple hours kids have been splitting the cross sections of the tail, and taking out portions to bend it tighter around the column, as well as cutting out some of our dowel that we spent so much time installing.  We think we can get away with what we have in there, but we may have to pull all of it and replace it with PVC pipe that has been pre-shaped into the curve. Not ideal. With the wire running all the way through the tail, I think we are going to be ok. The wire allows us to shape the tail, and still stay in one piece. We can also twist pieces so that the tail fits better to the contour we are looking for.
|
Also, yesterday we had an Art Teacher from Ten Sleep and some of her students come take a walk through tour. I think they were pretty impressed. It was awesome to see them get so excited. The teacher had some great questions about how we make this all work. She also searched and found this thread, so she could watch the progress. We discussed the incredible support you all have given us over the years, and the feedback you help us with as we are producing these installation projects. Anyway, it was fun to show another Art teacher what can happen thinking a little outside the box. 
|
|
Big Horn Sheep update- I think Landon is getting close to done. I'm really loving this. A Big Horn Sheep sculpture using horns that have hung on our cabin for over 50yrs, in the Big Horn Mountains. Hopefully we can find a good display spot somewhere in our little A-Frame cabin.     
|
|
When I look at the mermaid, I think "Painted Burlap" instead of "Seaweed". Colors are there, but the texture throws it way off. Can you put a finer weave fabric over the burlap, like Duck Cloth which is super cheap and a much finer weave, then you could cut that into both long and slender seaweed as well as the more lily pad shaped seaweed without the weave falling apart on the thin wavy stuff. Since she's mobile, coral wouldn't have to grow on her. Are Mermaids the witches that failed the sink test? Burlap would make a great base and you'd only have to do it over once then no ragrets.    
|
The person who complains most, and is the most critical of others has the most to hide.
All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident.
All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident.
|
Update 9/24 As I updated yesterday, we had to go back and look at our mermaid's tail position. We didn't have it curved radically enough to not fit out into the hallway. We took the pieces down to the display and set them up to confirm, to find out how off we were.    This is closer to what we need to see. The lexan fins will be shaped to wrap further, but you can see how off the torso and hips are from each other.  The hips need to be twisted, as well as more curved.   The tail is way too high, from where we want it to end.  Landon and Gianreye got right to work cutting sections and tightening the curve of the tail. Gianreye also identified what parts of the dowel we would not need for stability, and what we could remove to shape the lexan. He did a great job analyzing the problem and figuring out a solution.   This picture makes me laugh so hard. The kids were getting ready to slice the foam sections apart so they could be twisted, and some were making ready to heat up the lexan to curve it more. This was all at the same time. Emma is holding the heat gun facing her,  ..... she was just checking to see if it was in heat mode and not cooling, as she had just turned it "off" a few minutes earlier. She did a great job, along with Carter, getting the lexan to curve.  |
|
Originally Posted By brass: When I look at the mermaid, I think "Painted Burlap" instead of "Seaweed". Colors are there, but the texture throws it way off. Can you put a finer weave fabric over the burlap, like Duck Cloth which is super cheap and a much finer weave, then you could cut that into both long and slender seaweed as well as the more lily pad shaped seaweed without the weave falling apart on the thin wavy stuff. Since she's mobile, coral wouldn't have to grow on her. Are Mermaids the witches that failed the sink test? Burlap would make a great base and you'd only have to do it over once then no ragrets. https://i.imgur.com/DQfzwCa.jpeg https://i.imgur.com/BqTxGnB.jpeg https://i.imgur.com/xLzqg64.jpeg https://i.imgur.com/LFcH8LB.jpeg I hear what you are saying.  The kids feel differently. They specifically talked about how much they like the texture of her skin so far. I think it will "fit" a bit more as we combine it with the scales on the tail, along with the iridescent paint.
|
|
Originally Posted By 67Firebird: Very good work. Those kids have to feel good about the work they're doing. It's been a good year so far. The kids are really taking pride in what they are working on, all the way across the spectrum. It's fun to work with them when they are this engaged. We've had a couple "fires" that had to be put to bed between different groups working on the same projects, but that is somewhat a good thing at times, as it shows the passion is there, and they really want things to go well. |
|
Originally Posted By xanadu: It looks like you are ahead of the curve, being it's late September and so much work has done this far! As much as I'd like to believe that, it seems to always seem that way. There is so much left to do!!!!! So much we haven't even started planning out yet. The mural gals have big plans for huge murals of aquatic life. We have 2 ships to build, 3 planes, and more sharks. That doesn't include the coral that we have just barely touched. So much left to do.
|
|
Originally Posted By guns762: Big Horn Sheep Update- Landon P finished the piece yesterday.  I'm thrilled with how it turned out, and can't wait to display it, but will leave it here at the school for him to show off for a while. https://i.imgur.com/G0AZrVQ.jpg https://i.imgur.com/CW0jcES.jpg https://i.imgur.com/Lm7Dpdj.jpg https://i.imgur.com/y2YbYmL.jpg https://i.imgur.com/jEyjmlP.jpg https://i.imgur.com/A5vU0x1.jpg  This photo is like both sides of a spectrum. One wold west and the other sort of "techno" with cutting and shape edges instead o of the worn down and weathered bits of the Ram's head. |
The person who complains most, and is the most critical of others has the most to hide.
All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident.
All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident.