Posted: 11/20/2025 1:52:39 AM EDT
|
Trying to source a custom 40cm x 32cm piece of 16ga steel. I'm using it as a square cutting jig for making boxed corner bags and the size is just big enough to be annoying. I'd be laying this flat on a piece or cordura and then using a hot knife to cut it. I thought about buying an oversized sheet and having a friend cut it with his laser engraver, but his bed size is a bit too small. Is there anywhere that could cut me a sheet in those exact dimensions that won't be absurdly expensive? In normal measurements that's 15.75 in x 12.60 in. Just using cm as that's the tutorial I'd be working off of. I'm in Oregon if that helps. |
|
There are lots of places you could order it from, if there are no local suppliers. Here's one... https://www.metalsupermarkets.com/ Any sheet metal shop could stomp it out on a sheer in about 20 seconds. |
9 lives - 9 pellets... Coincidence?
|
Originally Posted By ske714: There are lots of places you could order it from, if there are no local suppliers. Here's one... https://www.metalsupermarkets.com/ Any sheet metal shop could stomp it out on a sheer in about 20 seconds. Ended up going this route. There was a shop local to me so I stopped by and was in and out in under 5 minutes. The sheet looks perfect. I appreciate the help. |