Current Deals on Printers, Filament and other Supplies (Page 5 of 7)
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
22378
EE: 100% (5)
MN, USA
|
Originally Posted By TheRX7Project: www.iiidmax.com has 10 rolls of PLA+ for $119, 6 for $85 or 3 for $50, look under "offers". They actually have a ton of good deals right now. I ordered 10 PLA+. Good luck. I'm sitting on 30 rolls of unprintable shit filament from them. And all my messages and calls go unanswered. I'll sell you all my PETG from them at a loss. Gladly. |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
22390
EE: 100% (5)
MN, USA
|
Originally Posted By TheRX7Project: www.iiidmax.com has 10 rolls of PLA+ for $119, 6 for $85 or 3 for $50, look under "offers". They actually have a ton of good deals right now. I ordered 10 PLA+. I guess I got lucky on the first couple rolls, but I still have a bunch in boxes that I don't feel like messing with when Re-Fuel is so cheap. |
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
| That has been iiidmax's deal for quite some time. The PLA+ seems ok to me but I'm not a heavy user, just printed about 10kg and wouldn't worry too much about buying some more. |
"And I never did get my lawnmower back!" - Bandit 6
"On the bright side, the money we saved by not going to Mars in the 1970s, we spent on welfare and public schools." - @MorlockP
"On the bright side, the money we saved by not going to Mars in the 1970s, we spent on welfare and public schools." - @MorlockP
|
Originally Posted By -Obsessed-: Good luck. I'm sitting on 30 rolls of unprintable shit filament from them. And all my messages and calls go unanswered. I'll sell you all my PETG from them at a loss. Gladly. If not... well, I ordered through Paypal (I know) so I shouldn't have an issue getting a refund. |
|
Originally Posted By TheRX7Project: Someone earlier in the thread said they had some bad batches last year. I guess we will see if they fixed the issues. If not... well, I ordered through Paypal (I know) so I shouldn't have an issue getting a refund. Yeah...this batch is fresh. Bought in August. 
|
|
Originally Posted By -Obsessed-: Yeah...this batch is fresh. Bought in August. Originally Posted By -Obsessed-: Originally Posted By TheRX7Project: Someone earlier in the thread said they had some bad batches last year. I guess we will see if they fixed the issues. If not... well, I ordered through Paypal (I know) so I shouldn't have an issue getting a refund. Yeah...this batch is fresh. Bought in August. I picked up 20 rolls and have printed through 5-6. It’s not the best filament but it does the trick. Fwiw; I dry it after pulling it out of the pack and print at 205c with 110% flow |
|
Originally Posted By gaspain: try PLA Pro...its what youtubers like best for gun frames Originally Posted By gaspain: Originally Posted By mPisi: That has been iiidmax's deal for quite some time. The PLA+ seems ok to me but I'm not a heavy user, just printed about 10kg and wouldn't worry too much about buying some more. try PLA Pro...its what youtubers like best for gun frames Technically I was using the iiidmax "PLA Extreme"!!!11!ONE!1 |
"And I never did get my lawnmower back!" - Bandit 6
"On the bright side, the money we saved by not going to Mars in the 1970s, we spent on welfare and public schools." - @MorlockP
"On the bright side, the money we saved by not going to Mars in the 1970s, we spent on welfare and public schools." - @MorlockP
https://www.3dfuel.com/
|
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
22547
EE: 100% (5)
MN, USA
|
*Wallet panicking noises* |
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
22549
EE: 100% (5)
MN, USA
|
Originally Posted By scul: But you're saving money!  Originally Posted By scul: Originally Posted By Rat_Patrol: *Wallet panicking noises* But you're saving money! I mean $14.40 for their refuel Pro pla? I had to get a shipment coming. |
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
Originally Posted By Rat_Patrol: I mean $14.40 for their refuel Pro pla? I had to get a shipment coming. Makes me nervous them saying their refuel no longer can maintain tolerances and thus no warranty or guarantee is given. I've been burned a lot by out of spec filament. But regular PLA+ is $12/roll. Hard to say no to that. |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
22551
EE: 100% (5)
MN, USA
|
Originally Posted By -Obsessed-: Makes me nervous them saying their refuel no longer can maintain tolerances and thus no warranty or guarantee is given. I've been burned a lot by out of spec filament. But regular PLA+ is $12/roll. Hard to say no to that. Originally Posted By -Obsessed-: Originally Posted By Rat_Patrol: I mean $14.40 for their refuel Pro pla? I had to get a shipment coming. Makes me nervous them saying their refuel no longer can maintain tolerances and thus no warranty or guarantee is given. I've been burned a lot by out of spec filament. But regular PLA+ is $12/roll. Hard to say no to that. Eh, I'm not concerned. It is still perfect for prototyping or stuff that isn't critical. Generally, for me, I am printing a ton of iterations and then a final part in the material I'll be using. |
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
Originally Posted By Rat_Patrol: Eh, I'm not concerned. It is still perfect for prototyping or stuff that isn't critical. Generally, for me, I am printing a ton of iterations and then a final part in the material I'll be using. Originally Posted By Rat_Patrol: Originally Posted By -Obsessed-: Originally Posted By Rat_Patrol: I mean $14.40 for their refuel Pro pla? I had to get a shipment coming. Makes me nervous them saying their refuel no longer can maintain tolerances and thus no warranty or guarantee is given. I've been burned a lot by out of spec filament. But regular PLA+ is $12/roll. Hard to say no to that. Eh, I'm not concerned. It is still perfect for prototyping or stuff that isn't critical. Generally, for me, I am printing a ton of iterations and then a final part in the material I'll be using. Too bad they don't have 4kg rolls in stock. |
|
Sunlu PLA+ I bought 10 rolls for $119.03 shipped. Be sure to clip the coupons. I've been very satisfied with this filament for my purposes. It's way more consistent than the IIDMax filament and this is only a dollar or two more a roll. https://www.aliexpress.us/item/3256802954514945.html?spm=a2g0o.new_account_index.0.0.55ed25b9ajM6Nq&gatewayAdapt=glo2usa&_randl_shipto=US |
|
Originally Posted By Rat_Patrol: I mean $14.40 for their refuel Pro pla? I had to get a shipment coming. I already have 5 rolls just waiting to be used, and I'm still considering getting more... I've never had any issue with their refuel pla. Also, here is Atomic's Thanksgiving deal 
|
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
|
Polymaker has 20% off their filament for Black Friday. Polymaker I use about 30kg of their filament per month. Very, very good stuff. Honestly now that I have it dialed in, I'd say it prints as good as 3D Fuel for PLA. Their ASA is pretty darn good too, on par with Prusament. I also have a 5kg spool of their PETG that I'll be trying this week as well. I will probably get 40kg of it. I don't have much more room to store it...I already have 100kg on hand. 
|
|
Originally Posted By -Obsessed-: Polymaker has 20% off their filament for Black Friday. Polymaker I use about 30kg of their filament per month. Very, very good stuff. Honestly now that I have it dialed in, I'd say it prints as good as 3D Fuel for PLA. Their ASA is pretty darn good too, on par with Prusament. I also have a 5kg spool of their PETG that I'll be trying this week as well. I will probably get 40kg of it. I don't have much more room to store it...I already have 100kg on hand. Their petg is weird. Have to print at 255c to get any strength. But yea decent ASA. |
|
Bought 40kg this morning. Poor UPS guy.  I need to burn through other rolls and colors. I just took inventory and I have over 60kg on hand of various flavors spread out across 82 spools. ETA: I found 8 more spools. Make that 90 spools total. 
|
|
Snapmaker has Black Friday going. I have been debating whether to get a J1 https://shop.snapmaker.com/products/snapmaker-j1-independent-dual-extruder-3d-printer# Wambam is also 20% off site wide. Even their pre order bambu build plate |
|
I just received an 3-mail from PRUSA - today is there last day on their black friday deals...free shipping and a few other items included depending on the package. I wonder how well their enclosure works for the printer.... |
The last thing a tyrant wants is their ideas to be judged on the battle field of truth and justice.
https://www.3dfuel.com/
|
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
|
Microcenter is running the $100 Ender 3 Pro deal again. https://www.microcenter.com/site/content/specialoffer3dprintertw.aspx?web=EMAIL%20OPT%20IN%20-%20Twitter_3D_Printer_catchall&utm_campaign=Twitter_CatchAll_Campaign&utm_source=Twitter&utm_medium=social |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
22834
EE: 100% (5)
MN, USA
https://atomicfilament.com/ 23% off 4x 1kg rolls with "NEWYEAR"
|
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
|
Originally Posted By scul: https://atomicfilament.com/ 23% off 4x 1kg rolls with "NEWYEAR" https://i.imgur.com/tpUZ2Il.png Time to stock up on CF PETG. 
|
|
https://www.monoprice.com/product?p_id=15835 Attached File Free shipping with 4 spools. |
|
Originally Posted By greyninja: https://www.monoprice.com/product?p_id=15835 https://www.ar15.com/media/mediaFiles/199158/deal_jpg-2691673.JPG Free shipping with 4 spools. |
|
use code REFUEL30 for the discount at 3DFuel.com Runs though Saturday (2/18) or supplies run out. Standard PLA+ & Pro PLA+ https://www.3dfuel.com/collections/refuel/products/refuel-pla-recycled-filament |
|
Originally Posted By -Obsessed-: https://www.ar15.com/media/mediaFiles/467079/3yecwg-2714781.png ?? Stuff works for me  X1C eats it fast and I was thinking of buying a couple more AMS units. |
"And I never did get my lawnmower back!" - Bandit 6
"On the bright side, the money we saved by not going to Mars in the 1970s, we spent on welfare and public schools." - @MorlockP
"On the bright side, the money we saved by not going to Mars in the 1970s, we spent on welfare and public schools." - @MorlockP
|
Originally Posted By mPisi: ?? Stuff works for me X1C eats it fast and I was thinking of buying a couple more AMS units. Glad you like it, seriously. Not sure what it is, but those of us with Prusas don't seem to have any luck with it. I bought 60 rolls of it thinking I was going to have smooth sailing with some nice Made in USA Filament. Nope. Nothing but issues. I had one roll that I measured the filament, and it varied from 1.63mm to 1.97mm within an 18" span. They refused to do anything for me. So, I don't buy it anymore. But if you like it and you've used it a bunch and have good results, rock on. |
|
Originally Posted By TheRX7Project: This is still going on, and they have 1/2 spools for $7 of other colors. Just ordered. .5kg green, black, and blue on sale for around 7 bucks. Free shipping after $39 and Pres day code for 5 off 25 or 25 off 100. https://www.monoprice.com/product?p_id=15827 |
|
Filament dryer, looks to be the same as Sunlu S2 for $35.00 if you use the $25 off coupon. https://www.amazon.com/gp/product/B09Z7Z5GHF/ref=ox_sc_saved_image_1?smid=A34VVVC59WFQ5V&th=1 |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
23675
EE: 100% (5)
MN, USA
|
White (white only) 500g spools of 3DX Tech PC for $27, normally $46. FYI: 300 nozzle, 110 bed, heated chamber needed. https://www.3dxtech.com/product/3dxmax-pc-polycarbonate/ |
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
$16 for P100 filters that do chemical vapors as well. For those of us that do resin prints. https://www.amazon.com/gp/product/B00AEFCKKY?tag=slicinc-20&ascsubtag=59105e62cb7a11edb1bbc63f9671413d0INT |
WTF is up with this bullshit anti-bayo lug crap. Was there a group of irrate japanese guys bonzai charging disabled school children and puppies that I wasn't aware of?
|
3D Fuel - 4kg roll sale PLA+/Pro only Code: 4KG15 https://www.3dfuel.com/collections/4kg-pla-in-stock-tough-pro-and-standard-pla |
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
|
Monoprice has black PLA plus for 12.35 a roll. Free shipping over $39. And use code take10 for $10 off of $50 I think I had 5 rolls with tax for around $56 https://www.monoprice.com/product?p_id=15833 |
|
Originally Posted By Detached: Monoprice has black PLA plus for 12.35 a roll. Free shipping over $39. And use code take10 for $10 off of $50 I think I had 5 rolls with tax for around $56 https://www.monoprice.com/product?p_id=15833 There's a reason it's so cheap... This 1.0kg spool features a thickness of 1.75mm ±0.10mm |
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
24438
EE: 100% (5)
MN, USA
|
Originally Posted By scul: There's a reason it's so cheap... This 1.0kg spool features a thickness of 1.75mm 0.10mm I would hope that is a typo 
|
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
Originally Posted By Rat_Patrol: I would hope that is a typo Originally Posted By Rat_Patrol: Originally Posted By scul: There's a reason it's so cheap... This 1.0kg spool features a thickness of 1.75mm 0.10mm I would hope that is a typo I would hope so too, but I doubt 0.01mm is likely, also... 
|
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C