Posted: 4/12/2026 12:24:40 PM EDT
|
My old SkyRC charge smoked, so I upgraded to a D200 Neo. When charging LiPo's, It spends almost no time in CV mode after reaching the target voltage. My old charger tapered the current down to almost zero. Here is the latest graph. This was a discharged 300mAh pack, charged slow at .2 amps, to see if it made any difference. Does this seem odd? Firmware is the latest. Attached File |
9 lives - 9 pellets... Coincidence?
|
Not a battery expert. Small batts like 300mah 3s would charge like that I would think. Not a lot of capacity so it charges up to level quick with no real taper down time. Maybe try .1 amp to see if you can get the full 300mah in it. |
I WILL NOT COMPLY
This post may contain factually correct misinformation
This post may contain factually correct misinformation
|
Originally Posted By StretchMaK: Not a battery expert. Small batts like 300mah 3s would charge like that I would think. Not a lot of capacity so it charges up to level quick with no real taper down time. Maybe try .1 amp to see if you can get the full 300mah in it. Thanks, going to try that next time. Also, it does appear to be only the smaller batteries that cut off so soon. I just charged a 1300mAh battery, and it did like I expected, with CV mode charging until the current was near zero. My old charger did that with the smaller batteries, too. I guess this one is just more conservative. If the wind ever quits blasting, I'll get to use it some more on some larger packs. Thanks again! |
9 lives - 9 pellets... Coincidence?
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter