Posted: 5/11/2016 5:54:06 PM EDT
[Last Edit: LawnStripes][Edited]
|
Hey guys. Over the winter I sold my VM Tactical (which ran 100%) because I found a deal on a M2 Field 21" I couldn't pass up. I added the following to it for 3 gun this year:
Nordic +5 extension Nordic clamp Nordic bolt handle HiViz sight Arredondo bolt release TTI safety TTI lifter Nordic recommends having 12-16" of spring extend past the end of the extension. I cut mine to 15". I took it to the range and shot several rounds through it with no issues (only loading 4 at a time, I didn't load it to capacity.) Well fast forward to the first match a few weeks ago. We start with a stoked tube (8 shells) and an empty chamber. Well I found quickly that when I load 8 it double feeds the first two shells. This happened numerous times. I started loading 7 shells at it worked correctly. I thought this was due to too much spring pressure, the spring was pushing with too much force for the latch to catch the second round. I took it home and shortened the spring 1" so it is now 14" past the end of the extension. I went to the range today and had the same double feed issue. Anyone have any suggestions before I send it off to C-Rum or AI to work it over? I'm getting pretty upset seeing as I thought this gun would be an upgrade from the VM. Thanks for your time and any assistance you may provide. |
|
Originally Posted By Vespid_Wasp:
Had any port work done? Tuning of the shell catch? Can you replicate it by loading the tube full and manipulating the shell catch? No work/porting/tuning has been done to it. The parts listed in the first post were the only things done to the gun since buying it. I have tried to replicate the issue at home and can't do it. It seems to only happen during live fire for some reason. |
|
I had an issue where after I loading my SBE II, it would launch a shell into the carrier before I was done load (thus you can't load until you cycle the bolt and get that shell out of the way).
I cleaned it really good, and boom. Everything worked. I didn't see any debris in there, but who knows. Sometimes a simple clean works wonders. |
|
Try disassembling the gun and cleaning very thoroughly behind the shell catch.
A friend of mine with a Winchester SX2 was having the same malfunctions and a couple good long blasts with some aerosol cleaner/degreaser behind his shell catch, and then a few shots of compressed air, and the malfunction went away. In his case we didn't have to drive out the pin holding the shell catch in place, but that would have been my next step if aerosol cleaner didn't get it working. |