Armory Sponsor
post your aow/sbs pics!!! (Page 1 of 21)
Posted: 5/3/2006 7:02:06 AM EDT
|
wanting to build one really bad and want to look at pictures while i wait for the paperwork and stamp of approval. plan on sbs' a rem870. TIA |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
 NOT MINE..but it would be if my state allowed SBS's. 
|
Boy, the next word that comes out of your mouth had better be some brilliant f**kin' Mark Twain sh**, 'cause it's definitely gettin' chiselled on your tombstone.
Otis B. Driftwood in The Devil's Rejects
Otis B. Driftwood in The Devil's Rejects
do you have a side view picture? is that a mag tube extension on the end or is that the end? |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
Will try and find another pic for you. Yes it is a mag ext. I cut down a factory 2rd ext to make it. |
Uh, from where? I'd love to get a 14" M4 but I can't find them. I'd rather buy gen-you-wine than have it chopped by a smith. |
Criminals don't fear guns. Criminals fear resolutely armed men or women they believe will actually shoot them.
) with a factory 14" bbl. The 12.5" are cooler IMO.
Mines an express too. Replaced the plastic trigger plate with a metal wingmaster one and changed out the MIM extractor. It's just as good as a police now, It just doesn't say it on the side.  The mag ext is a cut down factory 2rd. The chokes are great. I did quite well shooting clays with the full choke. |
beutiful 
|
thats exactly the look im going for! what lenght bbl is it? factory bbl or cut down? std mag tube or was it modified? im guessing speedfeed stock right? TIA |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
eklikwhoa, I bought this AOW from the original Scattergun Technologies in the early 1990's (way before they were bought out by Wilson). They built them on virgin 870 receivers. The barrel is 12.5" with a screw-in modified choke (don't know if ST bought them that way from Remington or cut down a barrel). It is a standard mag tube holding 4 rounds. The stocks that originaly came on it were wood, but I replaced them with the Speedfeed synthetic. Since this picture was taken I have replaced the forearm with a shorter one and installed a Mesa Tactical shell holder on the opposite side of the receiver. HTH |
<IMG SRC=/images/smilies/anim_wave.gif border=0 align=middle>
Thanks for the brief heart attack, until I scrolled down and saw your disclaimer. |
 I swiped the photo from a thread on Benelli's forum. The owner of this shorty M4 lives in Germany, I believe. |
Boy, the next word that comes out of your mouth had better be some brilliant f**kin' Mark Twain sh**, 'cause it's definitely gettin' chiselled on your tombstone.
Otis B. Driftwood in The Devil's Rejects
Otis B. Driftwood in The Devil's Rejects
|
how did you make that remignton mag extension shorter like that i looks badass
|
AK-47. When you absolutely, positively got to kill every motherfucker in the room.
http://www.shotgunworld.com/bbs/viewtopic.php?t=75400&sid=9a1d1febe140f2051bf3a216d04e8229 It says in the Remington LE Catalogue that they offer a factory 1rd ext but I have never seen one. |
Brownell's sells the Wilson / SGT one shot extension. www.brownells.com/aspx/NS/store/productdetail.aspx?p=12526&s=29836 They also have it with the left side sling loop and the QD swivel attachment |
Run Fast...Bite Hard!
 870 straight pimped. This was my divorce project/gift to myself.  Flat dark earth set-up inspired a buddy to have this darker twin made. Ironridge Guns |
those are absolutely sexy! |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
|
Hey gang, I'm sorry to but in but I can't help myself. I have a couple ?'s I need answered. 1) What is the cost for the tax on a form one? 2) Where can I buy a 12.5" bbl for my 870 express? Can I get one that accepts the remchokes? 3) Once the paperwork is finished and the new bbl installed, can I still put the 28" bbl on the same reciever? I have been wanting to do this for some time now. |
having just done a form1 i can try and help.
|
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
Beautiful. 
|
I am a zombie and I will polish you with a shoe-horn!
-Ed
Anger that is created from ones owns stupidity is the worst kind.
-IceHandLuke - XX-IV-MMVI
-Ed
Anger that is created from ones owns stupidity is the worst kind.
-IceHandLuke - XX-IV-MMVI
i agree |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
| So if I wanted to chop the barrel on my Norinco 870 clone, I would first have to fill out a form 1, send $200, when I get the stamp and approval back in the mail I can grab the rusty hacksaw out of the shed and chop it down? (sort of speak) |
ΜΟΛΩΝ ΛΑΒΕ!
Sunt eu, un Haïduc
كافر
Sunt eu, un Haïduc
كافر
yep |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
all and any legal purposes or enhance collection are two i usually see. i used the first one. |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
Yeah. But I would buy an NFA barrel. That way you still have your regular barrel too. Mine originally came with a 12" barrel from the dealer, but I got a 14" factory Rem barrel on the gun auctions so I could have a bead sight at least. |
87
Do you have to pay another $200 for the nfa bbl or can you go to a class 3 ffl once you have the stamp, for your sbs, and legally purchase as many under 18" bbl's as you want for that same sbs? I am a bit confused on some of the legalities on this issue. I am certain I want to put in my form 1 for an sbs because the aow cannot have a buutstock. If Iam wrong on that please correct me. Also, What procedure do I have to go through to get the cleo to sign off. Is there a certain form or do i just need to write an endorsement and have him sign it. I know that the NFA stuff is signed off in my area. Seeing as how I already have my CHP, I don't think that any other gun related issues will be a prob for me. Thanks for this thread btw. |
|
the reciever is whats registered so the bbl is just a part but they require you to note or notify them when a bbl length change is done. aow- no stock sbs- whatever i went the LLC route so i didnt need a cleo signoff. |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
| CDNN used to have factory 14" barrels for the 870 but Im pretty sure they are out. I called CDNN today and asked and the guy acted like I waas trying to buy crack. I informed him that they were once sold and he had no idea what I was talking about. Im guessing he's a new hire. |
There's no way they were out! I'm betting they dumped them off to some other dealer, cuz they had all kinds of sight configurations on short barrels. I tried to buy one from CDNN once. They would only ship to the addy on my NFA paperwork, and some other sketchy crap. They were really affraid to make the transaction. It ended up being more aggravation than it was worth so I just picked one up on the auctions. |
87
any word? |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
|
question for those that sbr'd their shotgun. could i just buy a base 870 and just cut the bbl. right up against the mag tube without any other work/parts done? like markm's |
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
Yup. That's essentially what I had. But I ended up buying a 14" barrel so I'd at least have a bead sight on the thing. |
87
still have the old bbl.?
|
FUNction over form
my replies consist of my opinions, my $0.02 worth so take it or leave it
my replies consist of my opinions, my $0.02 worth so take it or leave it
Who makes that birdshot you have in the bandolier? |
Kick out the lying, cheating, arrogant scum on both sides of the aisles, vote third party!!!!!!!!!
post your aow/sbs pics!!! (Page 1 of 21)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter