Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
6/8/2025 9:51:57 AM EDT
Have one of these safes for ammo storage, it has a digital electronic combo, its been problematic since day 1, I recall a thread replacing the front half of the lock (front side of door), can anyone point me in the right direction for a better lock?
TY
6/8/2025 10:04:51 AM EDT
[#1]
I ended up having to buy a replacement lock for my TS Winchester safe.
Tag for answers.
Distinguished
6/14/2025 7:37:31 PM EDT
[#2]
Bump
6/14/2025 7:46:46 PM EDT
[#3]
And here I am just about to buy one...

In for info.
Not a day passes over the earth, but men and women of no note do great deeds, speak great words, and suffer noble sorrows. Charles Reade
6/15/2025 2:57:45 PM EDT
[Last Edit: 413dan][Edited] [#4]
bumping for OP for ideas
6/20/2025 7:43:05 PM EDT
[#5]
bump
6/20/2025 8:31:27 PM EDT
[#6]
I've had one for ~ 10 years and have never had a problem with it.
6/22/2025 8:40:19 AM EDT
[#7]
Quote History
Originally Posted By OneMoreAR:
I've had one for ~ 10 years and have never had a problem with it.
View Quote


Sweet!
Bump for removal of vachina junky ass key pad.
6/22/2025 8:56:08 AM EDT
[#8]
Quote History
Originally Posted By OneMoreAR:
I've had one for ~ 10 years and have never had a problem with it.
View Quote
Same here but the outer coating of the lock has degraded and gotten sticky

Tag for replacement options.
7/1/2025 9:54:19 AM EDT
[#9]
bump
7/2/2025 10:17:42 AM EDT
[#10]
OST
"Want to bet a case of PMAGS on it?"
7/13/2025 3:46:08 AM EDT
[#11]
Quote History
Originally Posted By farscrape:
Same here but the outer coating of the lock has degraded and gotten sticky

Tag for replacement options.
View Quote
Rubbing alcohol and a rag should clean up any rubberized plastic coating that go gooey over time. Theres plenty of youtube videos on it
"I've always felt that the real horror is next door to us, that the scariest monsters are our neighbors."
-George A. Romero
7/20/2025 7:18:42 AM EDT
[#12]
bump
8/28/2025 8:34:22 AM EDT
[#13]
OP, you ever get this figured out?

"Want to bet a case of PMAGS on it?"
8/29/2025 2:22:56 PM EDT
[#14]
Quote History
Originally Posted By CharlesFinley:
OP, you ever get this figured out?

View Quote


Nope..
9/16/2025 8:21:07 AM EDT
[#15]
Quote History
Originally Posted By H1-HUMMER:


Nope..
View Quote


That stinks!
I hope you figure it out.
I keep wanting to buy one of these safes, but keep reading things like this.


"Want to bet a case of PMAGS on it?"
12/4/2025 6:20:17 PM EDT
[#16]
bump
12/5/2025 10:48:29 AM EDT
[#17]
@H1-HUMMER

I'm not sure if this is the exact type of safe that you have, but I found this. Hopefully it helps.

Installing S&G 6123 Lock on Winchester TS-9-EFL Gun Safe
12/29/2025 11:54:52 AM EDT
[#18]
I have one of those tractor supply "safes" and the lock has worked great for me. I also have up to TL-30s with manual dials.

It's such a cheap safe I would either get the exact same replacement lock or leave the digital lock on and use the key under it. It's just a locker more or less of thin steel so I would not go too crazy on a lock replacement. The Lock looks different sized than the real safes I have so you may have to do an eBay search for that lock that is on it

Looking on eBay you can find replacement locks pretty cheap
have gun will travel

Well you seen much combat? ......... I've seen a little on TV.

We are jolly green giants, walking the Earth with guns.

Lifetime NRA member SADLY
now GOA and ASA member!!!!!
1/5/2026 5:55:26 PM EDT
[#19]
Can you replace the lock on those with an S&G mechanical lock?

I've been considering buying the smaller one (I think its 22" wide and 20" deep) to put in my entry way for "grab on the way out the door" stuff (not super valuable, still safe worthy).
1/18/2026 12:06:31 AM EDT
[#20]
I've had a TS safe with the Elec lock for about 5 years with no probs.
4/19/2026 10:07:06 PM EDT
[Last Edit: -OdieGreen-][Edited] [#21]
I needed a new safe same day, so one of these at TSC was my best bet.

The keypad burned up in a couple days. Two of the three backup keys don’t work at all, and one of them works after about three minutes of jiggling the handle and key simultaneously. Talk about a panic moment.

Look at the reviews. There’s a reason there’s 200 1* reviews. These Winchester TSC safes are a major roll of the dice and not worth the gamble.
4/24/2026 3:28:16 PM EDT
[#22]
update:
I ended up contacting Winchester, there solution was to replace the key pad with another cheap one, $50 + 15 shipping, simple install and it's worked ever since, the battery hasn't needed to be replaced, I guess I'm ok with it, again all I use this safe for is ammo storage.
4/24/2026 4:42:06 PM EDT
[#23]
I know you got it fixed; but your local locksmith should be able to replace the lock for you.

Accountant
4/25/2026 11:34:39 AM EDT
[Last Edit: -OdieGreen-][Edited] [#24]
Quote History
Originally Posted By Accountant30339:
I know you got it fixed; but your local locksmith should be able to replace the lock for you.

Accountant
View Quote

This is what I’m looking into. Local locksmith said they have a keypad conversion and he gets more calls for the Tractor Supply safes than all other safes combined.

Quote to replace the factory one is $175 with a tested working unit. (He says they will install one purchased by you for a little cheaper but they won’t do it unless they can test it first.)
Quote to replace with the upgraded unit is $300.

If you look at the reviews on the replacement keypad they’re about a 20% failure rate too. So not sure what my next steps are. Seeing that OP had to pay them more money for a replacement keypad that has a 1 in 5 chance of being non functional isn’t the most appealing resolution.

If you’re looking at these, just buy the better safe.
4/27/2026 3:14:49 PM EDT
[#25]
Quote History
Originally Posted By -OdieGreen-:

This is what I’m looking into. Local locksmith said they have a keypad conversion and he gets more calls for the Tractor Supply safes than all other safes combined.

Quote to replace the factory one is $175 with a tested working unit. (He says they will install one purchased by you for a little cheaper but they won’t do it unless they can test it first.)
Quote to replace with the upgraded unit is $300.

If you look at the reviews on the replacement keypad they’re about a 20% failure rate too. So not sure what my next steps are. Seeing that OP had to pay them more money for a replacement keypad that has a 1 in 5 chance of being non functional isn’t the most appealing resolution.

If you’re looking at these, just buy the better safe.
View Quote View All Quotes
View All Quotes
Quote History
Originally Posted By -OdieGreen-:
Originally Posted By Accountant30339:
I know you got it fixed; but your local locksmith should be able to replace the lock for you.

Accountant

This is what I’m looking into. Local locksmith said they have a keypad conversion and he gets more calls for the Tractor Supply safes than all other safes combined.

Quote to replace the factory one is $175 with a tested working unit. (He says they will install one purchased by you for a little cheaper but they won’t do it unless they can test it first.)
Quote to replace with the upgraded unit is $300.

If you look at the reviews on the replacement keypad they’re about a 20% failure rate too. So not sure what my next steps are. Seeing that OP had to pay them more money for a replacement keypad that has a 1 in 5 chance of being non functional isn’t the most appealing resolution.

If you’re looking at these, just buy the better safe.


I did all the work, it was plug and play, I also had to buy a tap to chase the existing 2 screws to a different thread pitch..
4/28/2026 6:42:39 PM EDT
[#26]
Quote History
Originally Posted By farscrape:
Same here but the outer coating of the lock has degraded and gotten sticky

Tag for replacement options.
View Quote


Besides alcohol, WD-40 can also clean up degraded rubber.
5/1/2026 8:52:45 AM EDT
[Last Edit: -OdieGreen-][Edited] [#27]
So just wanted to update as I found my problem.

The plug for the battery is incredibly picky. The Duracell that came with it and Energizers I bought left an incredibly tiny gap that I couldn’t even tell was there.

So I went and bought a bunch of new Duracells per a recommendation I found on YouTube. Of the four I bought, two actually snap on the entire way and the safe works fine with them. The other two of the same expiration date/lot have the same intermittent connection issue.

I should get pictures but when I say the gap is tiny, I mean no one would ever notice if they weren’t specifically looking for it and very closely at that. It’s annoying, but go buy a bunch of Duracells and check. Your eye isn’t good enough and the best way to tell is the sound difference it makes.

Fucking dumb still, but my safe at least works now.
5/24/2026 1:40:59 PM EDT
[#28]
We've had that same safe for some time now.  I guess we just got lucky because ours has been 100% problem free since it came through the door.  Getting the safe through the door was not so problematic though.  We're still on the original battery I believe.  Ours is kept indoors, in a climate controlled environment, so maybe that helps?
"Fat, drunk and stupid is no way to go through life, son." - Dean Wormer
5/26/2026 8:34:37 AM EDT
[#29]
Quote History
Originally Posted By Tipsovr:
We've had that same safe for some time now.  I guess we just got lucky because ours has been 100% problem free since it came through the door.  Getting the safe through the door was not so problematic though.  We're still on the original battery I believe.  Ours is kept indoors, in a climate controlled environment, so maybe that helps?
View Quote


nope...mines been in a closet from day 1

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor