Armory Sponsor
War Belt/1st Line Picture Thread (Page 154 of 158)
| Thanks for the replies, so just get a ALS that will fit a RMR & the light I run? |
"Do you want to know who you are? Don't ask. Act! Action will delineate and define you." - Thomas Jefferson
VCDL Member
Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2"
VCDL Member
Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2"
|
Originally Posted By PA-Minuteman: Thanks for the replies, so just get a ALS that will fit a RMR & the light I run? To start, yes. You will eventually get more specific tastes as you run your gear more. |
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
|
Originally Posted By PA-Minuteman: What are you guys using for your holsters on your belts? I need to get a new holster setup for my battle belt due to me getting my G19 cut for a RMR. Is the ALS still the way to go? Also how are you mounting it to the belt? Tier 1 Concealment Spara holster with belt loops on my Asstec belt. Bordertown holster on a Bladetech MOLLE Tek Lok on my HSGI belt. |
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
|
Originally Posted By Deny_Everything: Safariland is going to pigeon hole you into a streamlight or surefire light, but you were probably going to buy one of those two anyway. |
"Do you want to know who you are? Don't ask. Act! Action will delineate and define you." - Thomas Jefferson
VCDL Member
Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2"
VCDL Member
Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2"
|
Originally Posted By CJ47: True North MHA + Safariland. No better way to do it. Originally Posted By CJ47: Originally Posted By PA-Minuteman: What are you guys using for your holsters on your belts? I need to get a new holster setup for my battle belt due to me getting my G19 cut for a RMR. Is the ALS still the way to go? Also how are you mounting it to the belt? True North MHA + Safariland. No better way to do it. Bang Hanger + Safariland is the better way. Bonus points for the Shaw Sidekick articulating leg strap, negative points for the scrap wrap job. :) Seriously, the MHA could be an uncomfortable sonofabitch. Solid, indestructible, but didn't play nice with your hip or thigh at times. Bang Hanger is Tegris (new version is now CURV), so it flexes instead of digging into your meat, but still very rigid on the draw. And it's lighter.    And as seen in the first picture, I'm also a Wilder inner belt enjoyer. |
|
Interesting set up in which the shooter has the buckle oriented to the back. This the Tactical Games, so lots of CrossFit type stuff, I suppose it keeps one from getting pinched when bending over sharply or squatting. https://www.instagram.com/p/C76g8RNxW6_/?igsh=MWFjdnhtY3JsY2Nn Attached File |
If you don't have a plan, you can't change it.
|
Originally Posted By PA-Minuteman: What are you guys using for your holsters on your belts? I need to get a new holster setup for my battle belt due to me getting my G19 cut for a RMR. Is the ALS still the way to go? Also how are you mounting it to the belt? And One Wrap is life. |
Greater love hath no man than this, that a man lay down his life for his friends. - John 15:13
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken
|
Has anyone used FSBE MOLLE belt panels on a regular belt? I have put a rifle and pistol magazine pouch on one, and an AK magazine pouch and bayonet on another, but I haven't used either in competition or training. The idea is to just keep a minimal amount of gear in a case that can be used in a pinch. They have Velcro strip on the inside that closes the internal dimensions to the width of a regular belt, but can be opened to slide onto a 2" belt. |
The government is just a corporation with a monopoly on violence.
|
Originally Posted By Croak: Bang Hanger + Safariland is the better way. Bonus points for the Shaw Sidekick articulating leg strap, negative points for the scrap wrap job. :) Seriously, the MHA could be an uncomfortable sonofabitch. Solid, indestructible, but didn't play nice with your hip or thigh at times. Bang Hanger is Tegris (new version is now CURV), so it flexes instead of digging into your meat, but still very rigid on the draw. And it's lighter. https://imgur.com/9PXQzyf.jpg https://imgur.com/HopABSK.jpg https://imgur.com/xjJW8f8.jpg And as seen in the first picture, I'm also a Wilder inner belt enjoyer. Never seen that before! Thanks for sharing! I've not had any issues with the MHA digging into me yet, but it's mostly been flat range work. And my body looks like a 2x10, so theres nothing for it to dig into 
|
Tactical, hyper masculine, military style member.
Joined:
Nov 2000
Posts:
33529
EE: 100% (31)
USA
|
Originally Posted By Boom_Stick: Is the oldschool ATS warbelt been outclassed by the latest? Looking for a padded belt with the option for suspenders. Been considering outfitting my old alice lc2 belt for S&Gs The ATS has a tendency to roll and sag heavily when loaded. The one I had did not have any sort of stiffener. My HSGI belts are better all-around, but you're going to pay more. |
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
|
Originally Posted By Croak: Bang Hanger + Safariland is the better way. Bonus points for the Shaw Sidekick articulating leg strap, negative points for the scrap wrap job. :) Seriously, the MHA could be an uncomfortable sonofabitch. Solid, indestructible, but didn't play nice with your hip or thigh at times. Bang Hanger is Tegris (new version is now CURV), so it flexes instead of digging into your meat, but still very rigid on the draw. And it's lighter. https://imgur.com/9PXQzyf.jpg https://imgur.com/HopABSK.jpg https://imgur.com/xjJW8f8.jpg And as seen in the first picture, I'm also a Wilder inner belt enjoyer. Originally Posted By Croak: Originally Posted By CJ47: Originally Posted By PA-Minuteman: What are you guys using for your holsters on your belts? I need to get a new holster setup for my battle belt due to me getting my G19 cut for a RMR. Is the ALS still the way to go? Also how are you mounting it to the belt? True North MHA + Safariland. No better way to do it. Bang Hanger + Safariland is the better way. Bonus points for the Shaw Sidekick articulating leg strap, negative points for the scrap wrap job. :) Seriously, the MHA could be an uncomfortable sonofabitch. Solid, indestructible, but didn't play nice with your hip or thigh at times. Bang Hanger is Tegris (new version is now CURV), so it flexes instead of digging into your meat, but still very rigid on the draw. And it's lighter. https://imgur.com/9PXQzyf.jpg https://imgur.com/HopABSK.jpg https://imgur.com/xjJW8f8.jpg And as seen in the first picture, I'm also a Wilder inner belt enjoyer. I found that to be the case with me as well with the True North. Ended up taking it off. Checking out the Bang Hanger now. |
Do you even OODA loop?
|
Axl eclipse belt in desert tiger. One of one. Attached File |
|
Attached File Finally done, from left to right: VTAC belt. Esstac 1+2 with 2011 inserts BFG pouch with surefire light Dump pouch LTC med kit Safariland holster with thumb release BFG mag pouch for an extra mag or whatever All off the EE minus the 2011 inserts, med pouch, and the belt slide for the holster/the guard. I don’t want to add up the cost 
|
|
Originally Posted By Boom_Stick: Is the oldschool ATS warbelt been outclassed by the latest? Looking for a padded belt with the option for suspenders. Been considering outfitting my old alice lc2 belt for S&Gs I don't think so, it's pretty similar to the BFG SOC-C I use, and I'm very content with it. |
|
I haven't been in this thread in a year or so. Just thought I'd drop a pic since I haven't posted in awhile. Blue Alpha belt, Esstac mag carriers, BFG MTKN! With QC, pressure bandage, compact chest seals, etc. TQ. Ragnarok holster, 5.11 gloves. It suits me well. Simple and comfortable Attached File |
"When I pass away, I hope my wife sells my stuff for what it's worth, and not what I told her I paid for it !!"
|
Desert tiger axl belt Currently the only one in existence Attached File |
|
Originally Posted By hoody2shoez: Desert tiger axl belt Currently the only one in existence https://www.ar15.com/media/mediaFiles/470854/20240815_175800_jpg-3295340.JPG @hoody2shoez Have you tried the bang hanger? |
|
Originally Posted By SlyFox125: @hoody2shoez Have you tried the bang hanger? Originally Posted By SlyFox125: Originally Posted By hoody2shoez: Desert tiger axl belt Currently the only one in existence https://www.ar15.com/media/mediaFiles/470854/20240815_175800_jpg-3295340.JPG @hoody2shoez Have you tried the bang hanger? I have not |
|
Originally Posted By SlyFox125: As a current owner of 3 MHA's, I'm curious as to how they compare. I may pick one up. Originally Posted By SlyFox125: Originally Posted By hoody2shoez: I have not As a current owner of 3 MHA's, I'm curious as to how they compare. I may pick one up. I greatly prefer them over the MHA. Lighter, doesn't dig into your leg, flexible, less expensive, easier to mount. |
|
Originally Posted By Croak: I greatly prefer them over the MHA. Lighter, doesn't dig into your leg, flexible, less expensive, easier to mount. Originally Posted By Croak: I greatly prefer them over the MHA. Lighter, doesn't dig into your leg, flexible, less expensive, easier to mount. I appreciate the feedback. I'll probably pick one up at some point. If it doesn't replace the MHA, I'll simply add it to the gear locker where countless other T&E'ed accessories have went over the years. Originally Posted By hoody2shoez: I've looked at the design and I really don't like the 3 molle wide Good point - I didn't consider that aspect. In actuality, one of the things that first drew me to the MHA was that it occupies less real estate on the belt. |
|
Originally Posted By Croak: Bang Hanger + Safariland is the better way. Bonus points for the Shaw Sidekick articulating leg strap, negative points for the scrap wrap job. :) Seriously, the MHA could be an uncomfortable sonofabitch. Solid, indestructible, but didn't play nice with your hip or thigh at times. Bang Hanger is Tegris (new version is now CURV), so it flexes instead of digging into your meat, but still very rigid on the draw. And it's lighter. https://imgur.com/9PXQzyf.jpg https://imgur.com/HopABSK.jpg https://imgur.com/xjJW8f8.jpg And as seen in the first picture, I'm also a Wilder inner belt enjoyer. Can you tell me who makes the holster its self? |
|
Originally Posted By weapons_free: https://www.ar15.com/media/mediaFiles/326579/1000003944-3357091.jpg Asstec construction belt im breaking in doing some demo You have no idea how happy this makes me. I also love that Multisdew just asked who did construction. I'm really happy it didn't go to some random to sit on a shelf, but rather went to a blue collar guy who would use it |
Originally Posted By p3590:
You cannot feed the Virginians an entire case of malort at once. A pint to sip in the parking garage outside the VA Supreme Court is safe.
With a case, they're going to pull up the 1609 map
You cannot feed the Virginians an entire case of malort at once. A pint to sip in the parking garage outside the VA Supreme Court is safe.
With a case, they're going to pull up the 1609 map
|
Originally Posted By WhiskersTheCat: You have no idea how happy this makes me. I also love that Multisdew just asked who did construction. I'm really happy it didn't go to some random to sit on a shelf, but rather went to a blue collar guy who would use it Originally Posted By WhiskersTheCat: Originally Posted By weapons_free: https://www.ar15.com/media/mediaFiles/326579/1000003944-3357091.jpg Asstec construction belt im breaking in doing some demo You have no idea how happy this makes me. I also love that Multisdew just asked who did construction. I'm really happy it didn't go to some random to sit on a shelf, but rather went to a blue collar guy who would use it 
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
|
Originally Posted By WhiskersTheCat: You have no idea how happy this makes me. I also love that Multisdew just asked who did construction. I'm really happy it didn't go to some random to sit on a shelf, but rather went to a blue collar guy who would use it My neighbor wandered over yesterday to help with the destruction and drink a few beers. He works bridge construction as a carpenter and he's considering one when his wears out |
Silent Brigade 1-20-20
|
Been running this duty belt for a few months now. It’s light years better than the old style Attached File |
|
Alright. Looking to get my first belt setup and I’ve been reading this thread for 3 days now. I have the enhanced belt with a double gap pistol and single mid rifle pouch in my cart from esstac. Planning to order the Wilder Tactical neoprene inner also that way I have the option of just throwing it on over whatever I’m wearing or running the esstac inner belt through belt loops. I’m kinda stuck on holster and mounting solution. I think I’m between a GCode XSR or a Tier1Concealed Centurion holster and either RTI or QLS mounting respectively. Any advantages or disadvantages one way or the other? I know it’s not a Safariland ALS but currently budget is a bit of a factor, and those two are essentially half the price of a Safariland setup. The pistol will be a G19 or 45 with TLR7. I’m just not sure of the differences on the retention hood mechanism between the two. Is one better or more durable than the other? Also would like a TQ holder and med pouch on there so I’ll take recommendations for either of those. I have basically zero medical training so I don’t need a full surgical kit or something but I plan to start working on taking some beginner med courses so I figure it wouldn’t hurt to have some basics. Lastly, if there’s any general things to consider when putting together a kit that I may not have thought of, feel free to throw any advice in there. Just a normal guy, not prior or current LE/Mil. Just looking to have something for range time but will be solid enough kit should a serious need every arise. |
|
Originally Posted By hoody2shoez: Do you primarily plan to use this belt with a pistol or rifle? Are you swapping out holsters constantly? Med Ltc Axl Hadley fabrications Those are my favorite 3 from the tons that I've used. Make sure you but the 'insert' Planning on a little bit of both. Basically just general range time. I figure in the future I can pick up a few extra/different pouches and swap them out as necessary if I wanted to add or subtract mags. Not currently planning on switching pistols out often but I may end up changing out a nice in a while, and I figured it would be nice to easily remove the pistol holster if strictly shooting rifle and don’t want to have the pistol on my hip. I ended up finding that T.Rex shows left hand Safariland 6354RDS with a QLS fork in stock. For basically what it would have cost for a Tier1Concealed or GCode. The pricing on Safariland website is what made me shy away from them at first. Belt and pouches inbound from Esstac and 6354RDS on the way from T.Rex. Wallet a little lighter but at least I’ll look cool at the range |
|
Originally Posted By TX_Vette: Alright. Looking to get my first belt setup and I’ve been reading this thread for 3 days now. I have the enhanced belt with a double gap pistol and single mid rifle pouch in my cart from esstac. Planning to order the Wilder Tactical neoprene inner also that way I have the option of just throwing it on over whatever I’m wearing or running the esstac inner belt through belt loops. I’m kinda stuck on holster and mounting solution. I think I’m between a GCode XSR or a Tier1Concealed Centurion holster and either RTI or QLS mounting respectively. Any advantages or disadvantages one way or the other? I know it’s not a Safariland ALS but currently budget is a bit of a factor, and those two are essentially half the price of a Safariland setup. The pistol will be a G19 or 45 with TLR7. I’m just not sure of the differences on the retention hood mechanism between the two. Is one better or more durable than the other? Also would like a TQ holder and med pouch on there so I’ll take recommendations for either of those. I have basically zero medical training so I don’t need a full surgical kit or something but I plan to start working on taking some beginner med courses so I figure it wouldn’t hurt to have some basics. Lastly, if there’s any general things to consider when putting together a kit that I may not have thought of, feel free to throw any advice in there. Just a normal guy, not prior or current LE/Mil. Just looking to have something for range time but will be solid enough kit should a serious need every arise. I like THIS for a tourniquet holder |
Those who would give up essential liberty, to obtain a little temporary safety, deserve neither liberty nor safety
|
Originally Posted By TX_Vette: Planning to order the Wilder Tactical neoprene inner also that way I have the option of just throwing it on over whatever I’m wearing or running the esstac inner belt through belt loops. Do it. I don't use mine often, but it rolls up tightly and, when I need it, I need it. Especially now that winter is upon us, mating the inner and outer belts is just not an option with clothing layers. |
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
|
Originally Posted By lew: Do it. I don't use mine often, but it rolls up tightly and, when I need it, I need it. Especially now that winter is upon us, mating the inner and outer belts is just not an option with clothing layers. Originally Posted By lew: Originally Posted By TX_Vette: Planning to order the Wilder Tactical neoprene inner also that way I have the option of just throwing it on over whatever I’m wearing or running the esstac inner belt through belt loops. Do it. I don't use mine often, but it rolls up tightly and, when I need it, I need it. Especially now that winter is upon us, mating the inner and outer belts is just not an option with clothing layers. This. |
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
|
Originally Posted By stoner01: This. Originally Posted By stoner01: Originally Posted By lew: Originally Posted By TX_Vette: Planning to order the Wilder Tactical neoprene inner also that way I have the option of just throwing it on over whatever I’m wearing or running the esstac inner belt through belt loops. Do it. I don't use mine often, but it rolls up tightly and, when I need it, I need it. Especially now that winter is upon us, mating the inner and outer belts is just not an option with clothing layers. This. Yup. |
|
Originally Posted By TX_Vette: Planning on a little bit of both. Basically just general range time. I figure in the future I can pick up a few extra/different pouches and swap them out as necessary if I wanted to add or subtract mags. Not currently planning on switching pistols out often but I may end up changing out a nice in a while, and I figured it would be nice to easily remove the pistol holster if strictly shooting rifle and don’t want to have the pistol on my hip. I ended up finding that T.Rex shows left hand Safariland 6354RDS with a QLS fork in stock. For basically what it would have cost for a Tier1Concealed or GCode. The pricing on Safariland website is what made me shy away from them at first. Belt and pouches inbound from Esstac and 6354RDS on the way from T.Rex. Wallet a little lighter but at least I’ll look cool at the range General setup Pistol x2 Rifle x2 Med kit Tq x2 Holster Pistol main (like LE or Pistol comp) Pistol x2-3 Support item (Ex: Rifle x1, baton, flashlight, cuffs, smoke, bang, etc) Med kit Radio (le) Holster Tq x2 Rifle main Rifle x2-3 Pistol x1 Med kit Holster Tq x2 |
|
Originally Posted By TX_Vette: Alright. Looking to get my first belt setup and I’ve been reading this thread for 3 days now. I have the enhanced belt with a double gap pistol and single mid rifle pouch in my cart from esstac. Planning to order the Wilder Tactical neoprene inner also that way I have the option of just throwing it on over whatever I’m wearing or running the esstac inner belt through belt loops. I’m kinda stuck on holster and mounting solution. I think I’m between a GCode XSR or a Tier1Concealed Centurion holster and either RTI or QLS mounting respectively. Any advantages or disadvantages one way or the other? I know it’s not a Safariland ALS but currently budget is a bit of a factor, and those two are essentially half the price of a Safariland setup. The pistol will be a G19 or 45 with TLR7. I’m just not sure of the differences on the retention hood mechanism between the two. Is one better or more durable than the other? Also would like a TQ holder and med pouch on there so I’ll take recommendations for either of those. I have basically zero medical training so I don’t need a full surgical kit or something but I plan to start working on taking some beginner med courses so I figure it wouldn’t hurt to have some basics. Lastly, if there’s any general things to consider when putting together a kit that I may not have thought of, feel free to throw any advice in there. Just a normal guy, not prior or current LE/Mil. Just looking to have something for range time but will be solid enough kit should a serious need every arise. You can get USMC surplus med pouches and TQ holders for about $15 each if budget is a concern. I actually like the med pouches quite a bit. |
If my wife had another baby and I was in the delivery room, I'd probably look at it and yell "welcome back bitch" and then have the hospital page Norcal. -scuba_steve
|
I just got a gift card to Blue Alpha Gear so it's time for me to upgrade my stuff. I posted my current setup a while back but I'll post it again. I like my current setup but the belt is some cheap thing and I don't even remember where I got it. I'm mostly looking to just upgrade my belt but I'm posting to ask for any recommendations for any Blue Alpha stuff you consider a "must" buy. Attached File Since this pic I went from two double pistol mags to a single triple, move the mag pouches forward for better access to the drop pouch, and added a little mini admin pouch in front of my pistol holster. It's a bit busy but it has everything I want on it. It is primarily a competition belt but also serves as my battle belt. I might use this opportunity to build a dedicated competition belt. |
|
Originally Posted By last_crusader: Does anyone wear a fixed blade on their pants belt but under their LBE/war belt/H Harness? That way you still have it if you ditch your belt, or just walking around? I do but it's small |
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
"I'll come for the killing and stay for the cheesecake"
SSgt Jason A Decker. 11/6/09
|
Originally Posted By last_crusader: Does anyone wear a fixed blade on their pants belt but under their LBE/war belt/H Harness? That way you still have it if you ditch your belt, or just walking around? I've seriously considered it as my belt kit is full, but that also limits access to the knife. Trying to think of a work around that doesn't involve me rearranging the LBE. |
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
Don't like what I see happening in the world.
Joined:
Aug 2010
Posts:
490
EE: 100% (38)
USA
|
Originally Posted By lew: I've seriously considered it as my belt kit is full, but that also limits access to the knife. Trying to think of a work around that doesn't involve me rearranging the LBE. Granpappy didn't need no sheath and his sticker was always accessible |
Something clever belongs here.
|
Originally Posted By Nopetrol: Granpappy didn't need no sheath and his sticker was always accessible https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcScsGgvwtRqJAs9fOWBn2LF4hArJXhWYVnz1A&s Originally Posted By Nopetrol: Originally Posted By lew: I've seriously considered it as my belt kit is full, but that also limits access to the knife. Trying to think of a work around that doesn't involve me rearranging the LBE. Granpappy didn't need no sheath and his sticker was always accessible https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcScsGgvwtRqJAs9fOWBn2LF4hArJXhWYVnz1A&s He looks like a pom. Therefore, his teeth are already fucked and he has nothing to lose. Considering mounting the knife and sheath horizontally like a seax across the back. Re-sheathing would be an experience, though. |
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
|
Originally Posted By lew: He looks like a pom. Therefore, his teeth are already fucked and he has nothing to lose. Considering mounting the knife and sheath horizontally like a seax across the back. Re-sheathing would be an experience, though. I've thrown around the idea of a cross-draw, or a separate baldric type setup. Maybe doing a tanker style holster with a built in cross-draw knife sheath setup? |
|
Originally Posted By marnsdorff: I've thrown around the idea of a cross-draw, or a separate baldric type setup. Maybe doing a tanker style holster with a built in cross-draw knife sheath setup? Originally Posted By marnsdorff: Originally Posted By lew: He looks like a pom. Therefore, his teeth are already fucked and he has nothing to lose. Considering mounting the knife and sheath horizontally like a seax across the back. Re-sheathing would be an experience, though. I've thrown around the idea of a cross-draw, or a separate baldric type setup. Maybe doing a tanker style holster with a built in cross-draw knife sheath setup? I have some webbing to try a 'tanker' setup out. Good idea. |
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken
|
Originally Posted By marnsdorff: I've thrown around the idea of a cross-draw, or a separate baldric type setup. Maybe doing a tanker style holster with a built in cross-draw knife sheath setup? Originally Posted By marnsdorff: Originally Posted By lew: He looks like a pom. Therefore, his teeth are already fucked and he has nothing to lose. Considering mounting the knife and sheath horizontally like a seax across the back. Re-sheathing would be an experience, though. I've thrown around the idea of a cross-draw, or a separate baldric type setup. Maybe doing a tanker style holster with a built in cross-draw knife sheath setup? I can't find a picture of it on my EDC belt, but the method on the left works very well at around 11 o'clock. I can draw with either hand and it sticks fairly close to my abdomen. If you don't have anything that far front it's worth a try. Attached File |
War Belt/1st Line Picture Thread (Page 154 of 158)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter