Armory Sponsor
Posted: 8/27/2026 1:32:03 PM EDT
| Trying to find a hand guard for a Virtus. Thinking 13” Midway but not having a lot of luck locating one. Any other better options? Thoughts / suggestions appreciated. Thanks |
|
Originally Posted By SpyHawk: You could use a legacy handguard and get the aftermarket handguard bridge piece. Have to be careful, the Lancer carbon fiber doesn't fit over the gas block of the 11.5" 5.56 barrels. The 300blk barrels, and shorter 5.56 ones, should fit. ETA: the Lancer will fit the 7.75" 5.56 barrel, but not the 9" or 11.5" |
|
Looks like Driven Arms co is doing the same as HRF, they're releasing a MCX LT suppressor handguard, too. DAC link |
|
Originally Posted By rb889: Have to be careful, the Lancer carbon fiber doesn't fit over the gas block of the 11.5" 5.56 barrels. The 300blk barrels, and shorter 5.56 ones, should fit. ETA: the Lancer will fit the 7.75" 5.56 barrel, but not the 9" or 11.5" Originally Posted By rb889: Originally Posted By SpyHawk: You could use a legacy handguard and get the aftermarket handguard bridge piece. Have to be careful, the Lancer carbon fiber doesn't fit over the gas block of the 11.5" 5.56 barrels. The 300blk barrels, and shorter 5.56 ones, should fit. ETA: the Lancer will fit the 7.75" 5.56 barrel, but not the 9" or 11.5" Mine is 300blk. I didn’t even know this was an option. Thanks |
|
What are you trying to do? Just shield your silencer so that the hot silencer doesn't burn things? Or are you trying to attach things to a rail directly outside of the silencer? If it's just the first, consider getting a silencer heatshield like theModtac U-RAC instead of a wider silencer-compatible handguard. It'll be lighter than a new handguard, allows airflow unlike a rubber silencer cover or a thermal wrap, and if you ever want to run the gun without the silencer then it's easy to remove both the silencer and the heatshield. |
Armory Sponsor