Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
4/19/2025 9:04:45 PM EDT
So I'm moving 3 large safes I've inherited from a good friend (he's in assisted living now)  2 of the safes are heritage 50 gun safes, and are already sitting on the hardwood timbers they were delivered on.  The other is a large 50 gun safe (can't remember brand) it's still bolted to its pallet.  I'm planning on removing that safe from its pallet and sitting and bolting it to 2 4x6 timbers.

All 3 safes will be sitting on top of trex deck boards to avoid any moisture or water soaking into the timbers from the concrete floor(not common in my basement, but its a basement it happens)

Anyhow, I was thinking should I be worried that the chemicals in the treated wood may corrode the bottom of the safe its sitting on, or would the paint job on the safe protect it?  If I do need to worry about corrosion what should I put between them
WV HTF, and C&R board Mod

You will find Sympathy between Shit and Syphilis in the dictionary.

RIP Kevin Carney
4/19/2025 11:57:22 PM EDT
[Last Edit: CNC_Guy][Edited] [#1]
You can get a barrier film from the building stores that is used between joists and hangers.
4/20/2025 9:08:29 AM EDT
[#2]
I used some leftover roofing paper.

Put it on my “box” top then set the safe on it.

No issues so far.

Been about 10 years now.
"F*ck it I'm done. Nothing to say other than I'm done giving a f*ck." - xerxes2695 - 1-6-2021 - 1849hrs.
4/20/2025 10:41:58 AM EDT
[#3]
A friend of mine covered his base with indoor/ outdoor carpet. Been good for over 10 years now.
4/20/2025 8:07:16 PM EDT
[Last Edit: jnk556][Edited] [#4]
I tracked down a piece of 1/4" MDF.  That should be a good barrier.  I'll cut it the size of my 4x6 skids, and glue it on top and set safe on that.

Here's where the safes are going...

 
WV HTF, and C&R board Mod

You will find Sympathy between Shit and Syphilis in the dictionary.

RIP Kevin Carney
4/26/2025 8:14:28 PM EDT
[#5]
You need to still be able to shim the safe to level it, so the door opens correctly and safely.  Don’t go perching it too high and find yourself with a door that gains speed as it opens thanks to a un level safe…
a loaded gun won’t set you free, so you say…
4/26/2025 8:51:29 PM EDT
[#6]
OP, do you have anything besides treated lumber to use?

I’m not a fan of it for any interior applications. Worked at a lumberyard for all of college and I can’t stand the stuff anymore.
4/27/2025 11:51:53 PM EDT
[#7]
Also you’re probably going to get corrosion on the bottom of the safe regardless. Rust stains on carpet are very easily removed.
4/28/2025 12:58:51 AM EDT
[#8]
I've heard hockey pucks are a great option.  Bonus you drill thru them for the floor anchors.  (Full disclosure, I may or may not have one raised up on ~16" of simple Lowes 4x just because I want it high, ~10 years, no problems)
5/11/2025 4:41:17 PM EDT
[#9]
I sat mine on Dricore subflooring tiles. Water can pass right under them in the event of a water leak.

5/15/2025 12:23:37 AM EDT
[#10]
Quote History
Originally Posted By 40_and_invisible:
I've heard hockey pucks are a great option.  Bonus you drill thru them for the floor anchors.  (Full disclosure, I may or may not have one raised up on ~16" of simple Lowes 4x just because I want it high, ~10 years, no problems)
View Quote

Mine's on hockey pucks. No issues after 5 or 6 years.
5/28/2025 7:56:10 PM EDT
[#11]
Quote History
Originally Posted By billygoat69:

Mine's on hockey pucks. No issues after 5 or 6 years.
View Quote


This^. I've used them for 15+ years now.
Political correctness is a doctrine, fostered by a delusional, illogical minority, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor