Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
10/5/2024 12:19:21 AM EDT
I bought an older nice RSC with a S&G 6700 on it. Everything appears to be working fine on it, but I know the lock is due for some TLC. I'd also like to reprogram (or reset) the combination to something more intuitive.

Is this something I should DIY or remove it and bring to a locksmith?

I'm not a complete moron and can follow instructions. At the same time, after buying the correct lube/tool I might be halfway to paying a locksmith for it. I also question if I'll accidentally run into the Jiffy Lube of locksmiths.
10/5/2024 12:39:02 AM EDT
[#1]
If you can follow simple instructions, easy DIY. Make sure to test it many times with the door open. You will need a special tool, but they ~$20.
10/5/2024 9:04:35 AM EDT
[#2]
S&G has a very good Mechanical Safe Lock Guide.
And Gordon made a detailed disassembly and description of a 6730 with lots of photos including how a change of combo works: What Is Inside an S&G 6730 Safe Lock?

That will probably provide all the info you need and you can decide if you want to work yourself on it or not.
10/17/2024 11:06:34 PM EDT
[#3]
Local locksmith offered to lube/reprogram for an easy $230 and promised to use the wrong grease. I ended up rebuilding it myself fairly easily.

Question is... this has a key tumbler on the front of it and I don't own a key. Any locksmith can re-pin it easily and I now know how to take it out. Should I have a key made for it? I might just superglue it... I can use the dial and it seems like a vulnerability.
11/1/2024 3:00:37 AM EDT
[#4]
Quote History
Originally Posted By 302w:
Local locksmith offered to lube/reprogram for an easy $230 and promised to use the wrong grease. I ended up rebuilding it myself fairly easily.

Question is... this has a key tumbler on the front of it and I don't own a key. Any locksmith can re-pin it easily and I now know how to take it out. Should I have a key made for it? I might just superglue it... I can use the dial and it seems like a vulnerability.
View Quote

The lock on the dial of that safe only exists to lock the dial at the zero position.  Its just to prevent casual tampering with the dial.  Impressioning a key for them is easy, and they are easily picked, I do not consider them to be of any real security value and there are not many different keys possible.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor