Armory Sponsor
Posted: 12/24/2025 12:07:41 AM EDT
[Last Edit: apocalypserisin][Edited]
|
Just picked this SR25 up for a pretty good deal, but not sure about the ID of the rifle or if this was an all KAC fraken-gun put together. I got the base rifle only, which was modified to take the URX 3.1 rail. I mocked up the bipod, irons, scope, and LAM from other guns to give me an idea of how to run. For the rifle itself, it appears to be an APC based on the gas block and barrel profile under the rail and comparing it to this picture (matches barrel on the right). Came with the waffle stock and the unfinished/stripped muzzle device. It's got the newer style KAC ambi safety and the non-dimpled castle nut. I'm guessing its just an APC that was modified to take the URX 3.1 and had the stock and irons stripped off, but one weird thing is that the front pivot pin is dimpled, which I am not aware of KAC doing. Lower also appears to have been rattled and stripped at some point. Finally, any suggestions on optic? I like the 3-18 but am leaning towards a 1-8 lpvo or something, and swapping muzzle to take my flow 762 or rotex iii. Or maybe I get a 7.62 KAC can.  
|
Joined:
Feb 2025
Posts:
44
EE: 100% (7)
VA, USA
|
Originally Posted By bm7465: Based on the barrel profile it looks like it could be an ACC but I could be wrong for sure. Hard to tell under the gas block just looks thinner than I remember APCs being. Either way, good looking setup! I agree with this can you post a photo without rail. Acc’s are pretty awesome though so nice buy! ETA I run a 1-8 on my ECC and it’s friggin fantastic. I’d definitely go lpvo unless you plan to shoot further than 600ish yds |
|
Originally Posted By Junglejim5: In regard to the dimpled pivot pin, there are SR-25’s that have them. I don’t know the timeline or rhyme or reason though. This. My EMC (~'12 era) has the rear pin with a divot while the front doesn't. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: This. My EMC (~'12 era) has the rear pin with a divot while the front doesn't. Originally Posted By SecretSquirell: Originally Posted By Junglejim5: In regard to the dimpled pivot pin, there are SR-25’s that have them. I don’t know the timeline or rhyme or reason though. This. My EMC (~'12 era) has the rear pin with a divot while the front doesn't. Glad to hear, sent the serial to KAC and they said it was a factory APC from 2024. Glad to see that it can indeed be all KAC even with the rarer things like the dimpled pivot pin. |
|
Originally Posted By SecretSquirell: This. My EMC (~'12 era) has the rear pin with a divot while the front doesn't. Originally Posted By SecretSquirell: Originally Posted By Junglejim5: In regard to the dimpled pivot pin, there are SR-25’s that have them. I don’t know the timeline or rhyme or reason though. This. My EMC (~'12 era) has the rear pin with a divot while the front doesn't. Glad to hear, sent the serial to KAC and they said it was a factory APC from 2024. Glad to see that it can indeed be all KAC even with the rarer things like the dimpled pivot pin. |
Armory Sponsor