Armory Sponsor
SR-25 pic part 2 (Page 117 of 119)
|
Originally Posted By bleaman225: I have them on all my MARS-H. I like them. Nice “click” going into position. Originally Posted By bleaman225: Originally Posted By SecretSquirell: Anyone running a Badger modular safety on their 25? Looks kinda interesting. I have them on all my MARS-H. I like them. Nice “click” going into position. Nice. I need to get a MARS-H one day, as well. |
God will not look you over for medals, diplomas, or degrees – but for scars
| Got my Badger safety in the other day and just installed it today. The detent was damn near unusable. Took using both of my thumbs to rotate it. After cycling it a few times it loosened up and is somewhat normal now. But, it will occasionally get tight again. I might put the KAC detent back in and see how it feels if it doesn't smooth out and become more consistent. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Got my Badger safety in the other day and just installed it today. The detent was damn near unusable. Took using both of my thumbs to rotate it. After cycling it a few times it loosened up and is somewhat normal now. But, it will occasionally get tight again. I might put the KAC detent back in and see how it feels if it doesn't smooth out and become more consistent. That’s not my experience but anything is possible. Did you change out any other components when you installed the safety, such as spring or pistol grip? |
|
Originally Posted By bleaman225: That’s not my experience but anything is possible. Did you change out any other components when you installed the safety, such as spring or pistol grip? Originally Posted By bleaman225: Originally Posted By SecretSquirell: Got my Badger safety in the other day and just installed it today. The detent was damn near unusable. Took using both of my thumbs to rotate it. After cycling it a few times it loosened up and is somewhat normal now. But, it will occasionally get tight again. I might put the KAC detent back in and see how it feels if it doesn't smooth out and become more consistent. That’s not my experience but anything is possible. Did you change out any other components when you installed the safety, such as spring or pistol grip? Nope. Just the safety and the detent that came with it. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By bleaman225: https://www.ar15.com/media/mediaFiles/218654/1B9884B9-755B-4D18-9CBD-0DB69339443F_jpe-2443855.JPG Green or gray? Kinda hard to tell on my screen. Either way... 
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Green or gray? Kinda hard to tell on my screen. Either way... Greenish.It’s really backlit but the sky looked better than this one. Attached File |
|
Originally Posted By bleaman225: Greenish.It’s really backlit but the sky looked better than this one. https://www.ar15.com/media/mediaFiles/218654/FB0286DD-2815-466A-AEAA-8247BDF6D6AD_jpe-2443916.JPG Originally Posted By bleaman225: Originally Posted By SecretSquirell: Green or gray? Kinda hard to tell on my screen. Either way... Greenish.It’s really backlit but the sky looked better than this one. https://www.ar15.com/media/mediaFiles/218654/FB0286DD-2815-466A-AEAA-8247BDF6D6AD_jpe-2443916.JPG Loving the earth tones of it all. I need a place like that to shoot. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By AndysAR15name: @cookezm how do you like the sandman on it? Backpressure ok etc? @AndysAR15name I haven't shot the 25 yet. Just finished kitting it out. I can report back later once I get some rounds through it. But I'm sure the sandman will be fine. It's a relatively low back pressure can anyways. |
|
Originally Posted By bleaman225: Greenish.It’s really backlit but the sky looked better than this one. https://www.ar15.com/media/mediaFiles/218654/FB0286DD-2815-466A-AEAA-8247BDF6D6AD_jpe-2443916.JPG I didn’t think that rifle could look better after seeing it at DRCC. But that tano NF proved that wrong… |
|
And now with even more aiming options. Attached File Attached File |
|
Originally Posted By bleaman225: And now with even more aiming options. https://www.ar15.com/media/mediaFiles/218654/9402C09E-6777-46D4-B215-35EBE0D66812_jpe-2472448.JPG https://www.ar15.com/media/mediaFiles/218654/CCC41854-73BC-42F6-B464-498FE8D653ED_jpe-2472449.JPG You have your own HEMTT? |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Attached File I have access to one to take cool photos and drive around is about the extent of me having one goes. |
|
Originally Posted By bleaman225: https://www.ar15.com/media/mediaFiles/218654/DCBF5410-C270-4770-8B44-1A81E84A3283_jpe-2473405.JPG I have access to one to take cool photos and drive around is about the extent of me having one goes. Got any of the old wrecker? That's what I cut my teeth on when I was a young pup, though that one is still significantly newer than the ones I had.
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Got any of the old wrecker? That's what I cut my teeth on when I was a young pup, though that one is still significantly newer than the ones I had. I’ll try to snag one, nothing on my phone currently. |
|
Originally Posted By bleaman225: And now with even more aiming options. https://www.ar15.com/media/mediaFiles/218654/9402C09E-6777-46D4-B215-35EBE0D66812_jpe-2472448.JPG https://www.ar15.com/media/mediaFiles/218654/CCC41854-73BC-42F6-B464-498FE8D653ED_jpe-2472449.JPG
|
|
Originally Posted By cookezm: https://www.ar15.com/media/mediaFiles/526698/MY_SR25_APC_jpeg-2517356.JPG Commissioned art piece of my SR25 APC Feels very...Archer.  Where did you get it done? |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Dug up some 10 year old photos I had posted earlier when I was still using Photobucket (no longer showing in the thread)… Attached File Attached File Attached File Attached File |
|
Originally Posted By 545superiority: Can the barrel on a sr25 match with the screw on gas block be used for a mk11? I was wondering if the threads on the gas block could be turned down. I believe so yes…can’t remember if I had that one or the little railed gasblock one done by marvin. |
Champion of the Sun, Master of Karate & Friendship
Joined:
Jan 2014
Posts:
3406
EE: 100% (120)
VA, USA
|
Originally Posted By SecretSquirell: URX 2 master race checking in. https://www.ar15.com/media/mediaFiles/204916/20190616_100013-981413.jpg https://www.ar15.com/media/mediaFiles/204916/20190704_122636-1003889.jpg URX Mafia till I die |
|
Originally Posted By Kbrown0122: URX2 is the way. Also happy New Year! https://www.ar15.com/media/mediaFiles/497552/F263E9C9-F628-4E71-9756-B9E33028FF4B_jpe-2656343.JPG Is that the Rock Island Auction rifle? How much did it go for? |
|
Originally Posted By TNW: Weird request, but does anyone know the shortest barrel that would be usable with a 12” MK11 Mod 0 FF RAS? Unsure if it’s the same rules that apply to AR15’s - newer to this platform and only have one 7.62 gun (building a second and just snagged the rail!) LMT does the 13.5 so that gas setup should work. Beyond that probably check out the variants and SBR section for what people are doing with shorter lengths. |
|
Originally Posted By TNW: Weird request, but does anyone know the shortest barrel that would be usable with a 12” MK11 Mod 0 FF RAS? Unsure if it’s the same rules that apply to AR15’s - newer to this platform and only have one 7.62 gun (building a second and just snagged the rail!) Not sure the barrel extension is compatible with SR25 upper and bcg but a Noveske Leonidas barrel would be reallllly cool with that rail. Maybe find a way to cobble it all together 
|
Champion of the Sun, Master of Karate & Friendship
Joined:
Jan 2014
Posts:
3407
EE: 100% (120)
VA, USA
|
Originally Posted By bleaman225: Not sure the barrel extension is compatible with SR25 upper and bcg but a Noveske Leonidas barrel would be reallllly cool with that rail. Maybe find a way to cobble it all together One step ahead… the leonidas is a bit short, so I snagged an infidel today. Bunch of parts on the mail right now… |
|
Originally Posted By usnguns: Is that the Rock Island Auction rifle? How much did it go for? It was and both my kidneys lol. Think I got it configured how I want it for now, my attempt at a DAC Attached File Attached File |
|
Originally Posted By Kbrown0122: It was and both my kidneys lol. Think I got it configured how I want it for now, my attempt at a DAC https://www.ar15.com/media/mediaFiles/497552/AD38D09E-A8FF-42FA-BFF9-9C1D2538053F_jpe-2664207.JPGhttps://www.ar15.com/media/mediaFiles/497552/F3ED5921-C918-49F2-909A-47D327072613_jpe-2664209.JPG Now that’s a blaster |
|
Originally Posted By Kbrown0122: It was and both my kidneys lol. Think I got it configured how I want it for now, my attempt at a DAC https://www.ar15.com/media/mediaFiles/497552/AD38D09E-A8FF-42FA-BFF9-9C1D2538053F_jpe-2664207.JPGhttps://www.ar15.com/media/mediaFiles/497552/F3ED5921-C918-49F2-909A-47D327072613_jpe-2664209.JPG @KBrown0122 what barrel length is that? And what rail is that? Looks bad ass! |
SR-25 pic part 2 (Page 117 of 119)
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter