Armory Sponsor
Refinishing Forum Picture Thread (Page 65 of 67)
|
Originally Posted By aIIan:
This is what happens when you have two different guns done in tungsten from two different shops 
http://allangreendale.net/dump/arfcom/tsten.jpg Bottom one likely isn't tungsten. |
|
Originally Posted By Gr8Santini:
Bottom one likely isn't tungsten. Originally Posted By Gr8Santini:
Originally Posted By aIIan:
This is what happens when you have two different guns done in tungsten from two different shops
http://allangreendale.net/dump/arfcom/tsten.jpg Bottom one likely isn't tungsten. Correct, looks more like titanium. Looks good, but yeah, I may be slightly annoyed had that been mine. Then again, as an applicator, unless a customer explicitly picks the exact color from my samples, they often tell me "something like this", and that is something like Tungsten... Sort of... 
|
Instagram
@madpigcustoms
@madpigcustoms
Uncle
Sam's
Misguided
Children
April 2016 "FBHO has been pretty pro gun so far, or at a minimum..neutral." - CPT_CAVEMAN
Sam's
Misguided
Children
April 2016 "FBHO has been pretty pro gun so far, or at a minimum..neutral." - CPT_CAVEMAN
|
I used to use the Dupli Color Engine Enamels a lot a few years ago. When my preferred colors stopped being stocked I moved on to Cerakote. I watched a youtube vid be Captain Berz and was inspired to try it again (Dupli Color Cast Coat Iron). I pinted my .308 build with it and felt very satisfied with the results (As expected), and decided to do my DDI AK the same way..
Here are a few pics. 
I know I could get the same color with Cerakote, but I dont have ez access to an oven to cure it like I prefer, so I haven't used it in months. I am not claiming this to be a replacement, just an alternative. *And pics have Manufacturer names of the products so the question is answered quickly and easily. |
|
Originally Posted By eastky454: I decided to make it all match, so here is the finished product http://i148.photobucket.com/albums/s39/ukelk/xray4.jpg http://i148.photobucket.com/albums/s39/ukelk/xray3.jpg |
OEF 10-11
|
Originally Posted By KTM300XCW:
The Green stock on the Hog Hunter stood out like a sore thumb here in Texas so I decided to camo it using natural sponges and spray paint. Below are before and after pics. I am now thinking about doing the same thing to a couple of my AR's. <a href="http://s916.photobucket.com/user/TORCHRIDER/media/HH-3_zpseolwcobd.jpg.html" target="_blank">http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-3_zpseolwcobd.jpg</a> <a href="http://s916.photobucket.com/user/TORCHRIDER/media/HH-1_zpslktqi45g.jpg.html" target="_blank">http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-1_zpslktqi45g.jpg</a> <a href="http://s916.photobucket.com/user/TORCHRIDER/media/HH-2_zpsau9hemil.jpg.html" target="_blank">http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-2_zpsau9hemil.jpg</a> The picture by the tree is amazing. |
|
Originally Posted By MISTERMOON:
I want the same! Nice work. <a href="http://s804.photobucket.com/user/Steve_Tyliszczak/media/image_zps6u9alryv.jpeg.html" target="_blank">http://i804.photobucket.com/albums/yy324/Steve_Tyliszczak/image_zps6u9alryv.jpeg</a> Is this Mil Spec green? |
|
Originally Posted By cop1211:
Is this Mil Spec green? Originally Posted By cop1211:
Originally Posted By MISTERMOON:
I want the same! Nice work. <a href="http://s804.photobucket.com/user/Steve_Tyliszczak/media/image_zps6u9alryv.jpeg.html" target="_blank">http://i804.photobucket.com/albums/yy324/Steve_Tyliszczak/image_zps6u9alryv.jpeg</a> Is this Mil Spec green? Custom mix of greens for an OD green to match my dads 1944 Willys Jeep. The registration number on the Glock matches his Jeep as well. |
Instagram
@madpigcustoms
@madpigcustoms
Pre B CZ 85. Before. Parkerizing worn off it places, rust in/under the Parkerizing, grips pretty worn, etc. Probably not bad for where it's been and how it was used/treated.
After. New springs/pins/barrel/sights/grips and two tone cerakoted by Primary Machine. 
|
How you live your life is important. Just be sure the memory of how you died doesn't overshadow the tales of how you lived your life.
|
Originally Posted By SHWELL:
I used to use the Dupli Color Engine Enamels a lot a few years ago. When my preferred colors stopped being stocked I moved on to Cerakote. I watched a youtube vid be Captain Berz and was inspired to try it again (Dupli Color Cast Coat Iron). I pinted my .308 build with it and felt very satisfied with the results (As expected), and decided to do my DDI AK the same way.. Here are a few pics. http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1573e.jpg http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1575e.jpg http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1570e.jpg http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1567e.jpg I know I could get the same color with Cerakote, but I dont have ez access to an oven to cure it like I prefer, so I haven't used it in months. I am not claiming this to be a replacement, just an alternative. *And pics have Manufacturer names of the products so the question is answered quickly and easily. How's the durability been with this? Any discoloration of any kind? solvent resistance? |
Here is my Savage Axis .223 with new Krylon OD/ Marblelizing Black paint with clear coat matte.
|
I always knew you had to be willing to die to even do this job. But, I don't want to push my chips forward and go out and meet something I don't understand. A man would have to put his soul at hazard. He'd have to say, "O.K.I'll be part of this world
|
Completely redid my hunting AR.
16" Wilson Combat LW barrel 12" Midwest Industries G3 LWM m-lok handguard Remington R-15 receivers Aero Precision Ultra Lightweight extended mount Geissele S3G trigger Trijicon TR20-2 mildot Mission First Tactical Minimalist stock Ergo grip 2A titanium gas block Spike's Tactical M16 bolt carrier BADASS safety BCM GF CH LWRC enhanced bolt Form 1 all titanium suppressor Magpul trigger guard Aervoe rattle can paint job 
It weighs 7lbs 6oz now. I think it weighed over 9lbs before. |
Be more human
This gun was okay, but I just couldn't get excited about the way it looked. Too much black, it was way boring.
Went downstairs this evening with a couple beers, 3 cans of Krylon, and a natural sponge and ended up with this. The factory buttpad got messed up- I'll order a new one and it'll be perfect. 
It breaks up the outline and makes the gun much more appealing to me. I love this thing now. It looks different without being over the top. Now I'm motivated to go walk a few draws this fall! |
|
Weekend project on my beater.
Attached File Attached File Attached File Attached File Attached File |
"Prostitution is a far more ethical and moral way to make a living than holding public office."
So I took the fact that I got this old 870 for a good price and i've just been messing around with it. For a while now i've wanted to try out an "old type face" type look on a gun so I figured why not give this a try. It's not perfect but it proved to be a good test bed for future projects. I'm hoping it will look really nice as it wears . This was done with some krylon camo paint...some old black paint i had lying around and sharpie
p.s. sorry for the poor image quality on the 2nd photo |
Dextra gladius, leva scutuum, corpore honor. "In the right hand the sword, in the left the shield, in ourselves honor;"
|
Originally Posted By Aeneas2020:
So I took the fact that I got this old 870 for a good price and i've just been messing around with it. For a while now i've wanted to try out an "old type face" type look on a gun so I figured why not give this a try. It's not perfect but it proved to be a good test bed for future projects. I'm hoping it will look really nice as it wears . This was done with some krylon camo paint...some old black paint i had lying around and sharpie
https://www.AR15.Com/media/mediaFiles/276205/shotty-reverse-156913.jpg https://www.AR15.Com/media/mediaFiles/276205/shotty-156914.jpg https://www.AR15.Com/media/mediaFiles/276205/shotty-close-up-156912.jpg p.s. sorry for the poor image quality on the 2nd photo 
|
Squire
"Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839
I survived ARFbortion2016 and all I got was this stupid sigline
"Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839
I survived ARFbortion2016 and all I got was this stupid sigline
|
Originally Posted By BigBrakes76:
Weekend project on my beater. https://www.AR15.Com/media/mediaFiles/246611/IMG-4107-152195.JPG https://www.AR15.Com/media/mediaFiles/246611/IMG-4117-152196.JPG https://www.AR15.Com/media/mediaFiles/246611/IMG-4119-152197.JPG https://www.AR15.Com/media/mediaFiles/246611/IMG-4140-152198.JPG https://www.AR15.Com/media/mediaFiles/246611/IMG-4141-152199.JPG I like this, it's very similar to what I've been planning for my next paint job, although I'm planning on a different shade of green. |
This is my signature. There are many like it, but this one is mine.
|
Originally Posted By SecretSquirell:
Very interesting. Originally Posted By SecretSquirell:
Originally Posted By Aeneas2020:
So I took the fact that I got this old 870 for a good price and i've just been messing around with it. For a while now i've wanted to try out an "old type face" type look on a gun so I figured why not give this a try. It's not perfect but it proved to be a good test bed for future projects. I'm hoping it will look really nice as it wears . This was done with some krylon camo paint...some old black paint i had lying around and sharpie
https://www.AR15.Com/media/mediaFiles/276205/shotty-reverse-156913.jpg https://www.AR15.Com/media/mediaFiles/276205/shotty-156914.jpg https://www.AR15.Com/media/mediaFiles/276205/shotty-close-up-156912.jpg p.s. sorry for the poor image quality on the 2nd photo Yeah! That is crazy, but I like it! |
US Navy
|
Originally Posted By Wormydog1987:
Completely redid my hunting AR. 16" Wilson Combat LW barrel 12" Midwest Industries G3 LWM m-lok handguard Remington R-15 receivers Aero Precision Ultra Lightweight extended mount Geissele S3G trigger Trijicon TR20-2 mildot Mission First Tactical Minimalist stock Ergo grip 2A titanium gas block Spike's Tactical M16 bolt carrier BADASS safety BCM GF CH LWRC enhanced bolt Form 1 all titanium suppressor Magpul trigger guard Aervoe rattle can paint job http://i416.photobucket.com/albums/pp247/wormydog1724/6FCC7BF5-CDA9-4054-B200-B016F372D4A9_zps1mpzcxrt.jpg http://i416.photobucket.com/albums/pp247/wormydog1724/CA454696-DCEE-4825-9706-6FC3AA520B0B_zpsros6elc9.jpg http://i416.photobucket.com/albums/pp247/wormydog1724/A8C5F9CB-0597-4BDC-9682-4EB5E2C7A408_zpspp0ifcbe.jpg It weighs 7lbs 6oz now. I think it weighed over 9lbs before. 
|
Those who say it cannot be done should not interrupt those busy proving them right.
I had no clue there even was a Refinishing Forum. Very cool. I'm all about some paintwork on an AR. Here's my House of Kolor Passion Purple Pearl basecoat with Sherwin Williams matte clear build. I work in a body shop. I have lots of things this HoK color. Apparently I have a purple thing going on. F1 chassis.
I also painted the wings on the charging handle and the bolt catch to mimic the naked titanium parts on the lower. All remaining hardware on the gun replaced with stainless. 
Adjusting knobs on the Luth-AR MBA-3 stock also painted naked titanium. 
I color filled the custom engraving on the flash can. 
General pics... 
|
|
Originally Posted By TerryH:
I had no clue there even was a Refinishing Forum. Very cool. I'm all about some paintwork on an AR. Here's my House of Kolor Passion Purple Pearl basecoat with Sherwin Williams matte clear build. I work in a body shop. I have lots of things this HoK color. Apparently I have a purple thing going on. F1 chassis.
https://c1.staticflickr.com/5/4164/34397354386_7680cf262e_b.jpg https://c1.staticflickr.com/5/4169/34289386601_8092c25f66_b.jpg I also painted the wings on the charging handle and the bolt catch to mimic the naked titanium parts on the lower. All remaining hardware on the gun replaced with stainless. https://c1.staticflickr.com/5/4175/33628839663_dd75301c42_b.jpg Adjusting knobs on the Luth-AR MBA-3 stock also painted naked titanium. https://c1.staticflickr.com/5/4161/33610101363_b18bbb3cf8_b.jpg I color filled the custom engraving on the flash can. https://c1.staticflickr.com/5/4166/34289388331_4997f80b03_b.jpg General pics... https://c1.staticflickr.com/5/4178/34035347440_91c0f397a2_b.jpg https://c1.staticflickr.com/5/4174/34289385891_2544cbb033_b.jpg https://c1.staticflickr.com/3/2879/34378732106_c16faa6574_b.jpg |
A mix of Krylon Ultra Flat Khaki and Olive and Rustoleum Ultra Flat Brown and mesh laundry bag for pattern. Pretty happy with how it turned out, looks to be a good four season color mix for southeastern VA. I just need to convince myself to stop being a little bitch and do it to one of my ARs instead of just an old BB gun that was laying around.
The cardboard was the test run. |
|
Attached File Attached File |
Originally Posted By bradpierson26:
So I know you're a SF whore . . . . .
So I know you're a SF whore . . . . .
|
Here's my first attempt at camo rattle canning on my Ruger American Rimfire stock. I'm pretty happy with it.
Aervoe Earth Yellow base coat, stripes of OD, Field Drab, then some pine straw action (well... cut up broom bristles) with Earth Brown and Krylon Hunter Green. 
|
|
Painted my Colt LE6920 a month ago using Duracoat aerosol Magpul FDE, and reassembled it last night. I painted the upper and lower receivers, the 15" Troy Alpha rail, and the flash hider.
Attached File Attached File |
 1 by Two Sierra, on Flickr
|
Originally Posted By bradpierson26:
So I know you're a SF whore . . . . .
So I know you're a SF whore . . . . .
|
Attached File Attached File Attached File Attached File Attached File Paint all the things! |
"Having been legally declared part of the fruits and vegetables family, Hennessy is now WIC eligible." StripperHerder
|
Originally Posted By crzapy:
https://www.AR15.Com/media/mediaFiles/231252/20170827_143358-352191.JPG Paint all the things! ETA Pic thread, KG Gun Kote, first time using it. Attached File |
...for the People who once upon a time handed out military command, high civil office, legions — everything, now restrains itself and anxiously hopes for just two things: bread and circuses.
|
Originally Posted By IdahoHk416:
Painted my Colt LE6920 a month ago using Duracoat aerosol Magpul FDE, and reassembled it last night. I painted the upper and lower receivers, the 15" Troy Alpha rail, and the flash hider. https://www.AR15.Com/media/mediaFiles/163482/IMG_3395-326408.JPG https://www.AR15.Com/media/mediaFiles/163482/IMG_3399-326409.JPG |
|
My MRP is finished at the Cerakote applier and is heading back to me. Attached File |
|
Picked up a CZ 455 with the Manners Stock... I could not stand the green base, so I used some free time this afternoon to make it something I could live with.
Rattle can, some brushes and some model paint, and a couple coats of matte clear. Works for me. Yesterday: 
Today: 
|
|
Originally Posted By Danilo:
Picked up a CZ 455 with the Manners Stock... I could not stand the green base, so I used some free time this afternoon to make it something I could live with. Rattle can, some brushes and some model paint, and a couple coats of matte clear. Works for me. Yesterday: https://s5.postimg.cc/4hh4zcmyf/IMG_3354.jpg Today: https://s5.postimg.cc/j0oa0qsxz/IMG_3382.jpg https://s5.postimg.cc/f4ay4rfo7/IMG_3384.jpg https://s5.postimg.cc/6ysw6lz53/IMG_3385.jpg
|
Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."
Refinishing Forum Picture Thread (Page 65 of 67)
Armory Sponsor