Armory Sponsor
Redding PM baffle and mods. Lots of pics. (Page 2 of 2)
|
Originally Posted By Happy2shoot:
http://i1097.photobucket.com/albums/g359/Warm_Garand/Modding%20RCBS%20Uniflow/WhatYouNeed.jpg Found a shortcut! Homedepot brand Husky 2in surface prep kit. Couldn't find a picture of the exact one I purchased at Homedepot but this is very close. http://www.northerntool.com/images/product/700x700/158/158358_700x700.jpg To get deeper in the powder bowl trim the outer edge of the rubber back-plate (bottom right object) a half centimeter. I think it took me about 15 minutes to smooth out 2 Hornady powder measures. P.S. Dryflash your pics are dead Originally Posted By Happy2shoot:
http://i1097.photobucket.com/albums/g359/Warm_Garand/Modding%20RCBS%20Uniflow/WhatYouNeed.jpg Originally Posted By Eight_Ring:
Electric drill drives the wire brush>>drives the bisquit of coarse stee wool>>drives the cone of abrasive paper––coarse to cut faster, use successively finer grits to smooth out swirl marks. Found a shortcut! Homedepot brand Husky 2in surface prep kit. Couldn't find a picture of the exact one I purchased at Homedepot but this is very close. http://www.northerntool.com/images/product/700x700/158/158358_700x700.jpg To get deeper in the powder bowl trim the outer edge of the rubber back-plate (bottom right object) a half centimeter. I think it took me about 15 minutes to smooth out 2 Hornady powder measures. P.S. Dryflash your pics are dead Nice. Thanks for the tip. I'll keep an eye peeled for those next time I'm in Home Depot. |
One if by land, and two if by sea; and I on the opposite shore will be.....
Redding PM baffle and mods. Lots of pics. (Page 2 of 2)
Armory Sponsor