Armory Sponsor
Posted: 4/24/2013 3:18:02 AM EDT
IMPACT WEAPONS COMPONENTS "SCAR CHARGER" eliminates the possibility of injury and torn knuckles caused by the factory FNH Charging Handle running into your optic mounts when charging your SCAR. The location and design of the FNH Factory SCAR reciprocating Charging Handle can sometimes be a major problem--especially if you are mounting optics with a QD lever system. Your knuckles will take a beating for sure. IWC's "SCAR Charger" Charging Handle is uniquely designed to lower the contact point for the Operators hand, providing clearance for your knuckles to pass freeley under the Optic Mount, avoiding injury. Control of the SCAR Charger is improved over the factory FNH Charging Handle. CNC machined and relieved center section of increases the amount of edged contact surfaces on the SCAR Charger, improving grip, with or without gloves. IWC's SCAR Charger is virtually the same weight & length as the factory FNH Charging Handle, ensuring the weapon functions and cycles as designed. The outboard, pointed end of IWC's SCAR Charger can now be used as gouging / tearing weapon, similar to the function of the charging handle found on AK type weapons. SCAR Enhanced Charging Handle Specifications: Hassle Free installation. Single piece design is removed / installed exactly the same way as the factory FNH Charging Handle. Designed to function flawleessly on ALL SCAR models: MK16, MK17, MK16S and MK17S Save your knuckles! IWC's SCAR Charger Charger's contact patch is angled down and away, which moves the shooters hand away from the top rail and optics mount. The SCAR Enhanced Charging Handle can be mounted angle down or angle up and on either the ejection port side or non-ejection port side. Made from 4140 steel, with industry leading Melonite finish for incredible wear resistance. Weighs just .371oz $34.95 - Available here: IWC's SCAR Charger |
|
Originally Posted By OnlytheTip:
Would you consider doing a limited run of these for a Mossberg 930 SPX? I know there is a market for these. Sure! We'll look into it. |
|
Check out this awesome customer review of SCAR Charging Handles!
IWC's SCAR CHARGER |
|
Originally Posted By 11bravo01:
Would you guys consider building an ACR charging handle? It's the same shape, but fits the ACR. Design & prototype testing complete, production starts next week, for sale in 5 weeks or so. MOUNT-N-SLOT |
|
Originally Posted By MOUNT-N-SLOT:
It's the same shape, but fits the ACR. Design & prototype testing complete, production starts next week, for sale in 5 weeks or so. MOUNT-N-SLOT Originally Posted By MOUNT-N-SLOT:
Originally Posted By 11bravo01:
Would you guys consider building an ACR charging handle? It's the same shape, but fits the ACR. Design & prototype testing complete, production starts next week, for sale in 5 weeks or so. MOUNT-N-SLOT Awesome! I look forward to the release. |
Well, I thought you looked familiar. Sorry, I didn't recognize you without crap in your pants!
|
Originally Posted By HellFire4Effect:
awesome...a larger CH to really FU your thumb when it gets hit why not make one that fold like the FAL folding CH Make a folding one and bring it to us... We'll see it it FU our thumbs... If not, then we'll market it for you and you get the bank! |
|
Originally Posted By ScrapMetal762:
any plans for this coming in FDE? No plans. We Melonite them, as they're made from steel. |
| How about making one to fit the Mossberg 930 SPX? I have a spare factory one that I will give you to design the template. Hell, I'll send you the whole damn shotgun just to get a new handle for it. Everyone that makes has too much play in it for my liking. The Nordic Components charging handle is just as horrible as the factory one, albeit larger. There is a pretty decent market for one. |
|
Originally Posted By OnlytheTip:
How about making one to fit the Mossberg 930 SPX? I have a spare factory one that I will give you to design the template. Hell, I'll send you the whole damn shotgun just to get a new handle for it. Everyone that makes has too much play in it for my liking. The Nordic Components charging handle is just as horrible as the factory one, albeit larger. There is a pretty decent market for one. Thanks for the offer, its our favorite way of designing parts! We have access to a 930 in our local fan base, which we borrowed this week to measure & 3D print a prototype. We should have it available in 5 weeks or so. Stay tuned! |
|
Originally Posted By MOUNT-N-SLOT:
Thanks for the offer, its our favorite way of designing parts! We have access to a 930 in our local fan base, which we borrowed this week to measure & 3D print a prototype. We should have it available in 5 weeks or so. Stay tuned! Originally Posted By MOUNT-N-SLOT:
Originally Posted By OnlytheTip:
How about making one to fit the Mossberg 930 SPX? I have a spare factory one that I will give you to design the template. Hell, I'll send you the whole damn shotgun just to get a new handle for it. Everyone that makes has too much play in it for my liking. The Nordic Components charging handle is just as horrible as the factory one, albeit larger. There is a pretty decent market for one. Thanks for the offer, its our favorite way of designing parts! We have access to a 930 in our local fan base, which we borrowed this week to measure & 3D print a prototype. We should have it available in 5 weeks or so. Stay tuned! Hot damn! Make it big and pretty. |
| SCAR CHARGER Charging Handles for SCAR back in stock!!! |
|
I got one for my daily work gun. If I wore gloves all the time at work I would have left it stock.
I did something bad to it: Before: 
After: 
Installed: 
What I used: 
The IWC charger you see there is my Mk01 variant using self adhering silicone tape. I've always been a fan of the MP5 charging handles. IWC has hit it out of the park with this one! It's a seachange in the way I can manipulate the scar bolt. IMVFHO, The ergonomics of this charging handle far surpass the stock one. I recommend the IWC without any reservation. 
|
|
Originally Posted By MOUNT-N-SLOT:
It's the same shape, but fits the ACR. Design & prototype testing complete, production starts next week, for sale in 5 weeks or so. MOUNT-N-SLOT Originally Posted By MOUNT-N-SLOT:
Originally Posted By 11bravo01:
Would you guys consider building an ACR charging handle? It's the same shape, but fits the ACR. Design & prototype testing complete, production starts next week, for sale in 5 weeks or so. MOUNT-N-SLOT Any update on this? |
It's the Army, I can believe anything.
Armory Sponsor