Armory Sponsor
Posted: 9/11/2026 10:48:40 PM EDT
[Last Edit: AFSOC][Edited]
a ZF5T being converted to a k SD       Need to rework the Cocking Tube now and the Cocking Bearer... then install the barrel and take it for a test drive... then Degrease it, Blast, Weld, Re-Test it one more time Degrease x3 Blast and park then paint then do one more test with the new owners can... and let him take it home. |
"The development of the flamethrower proves that at one time, someone, somewhere thought to themself: There are people over there that I want to set on fire, but they are too far away. George Carlin
|
Originally Posted By motas2002: How do you like those weapon builder tools to push the barrel out? Worth the money? Thanks. Depends on if you plan to do a lot of work or a little... I plan to use them quite a bit... so it is a worthwhile investment otherwise you can rent the tools from them as well. I think it is probably $125 for a week for most things. Keep in mind this setup is not MP5 specific even though marketed as such it works for all 90 series.... Wish there was a better solution for holding the receiver for the pin.. I used this drill fixture... One important tidbit and you can probably see in the press photo the guide insert has a trough milled in it to clear the Bolt Carrier Sear Trip denial block in Zenith and MKE and MAC receivers. The Sp5s have different denial blocks at different points. so you would maybe need that mod or maybe not. |
"The development of the flamethrower proves that at one time, someone, somewhere thought to themself: There are people over there that I want to set on fire, but they are too far away. George Carlin
Armory Sponsor