Armory Sponsor
Posted: 4/11/2026 12:36:32 PM EDT
[Last Edit: wvfarrier][Edited]
| How the !@@$ do you get the recoil spring tube out of the receiver? I heated that sucker up until I couldnt touch it and the thing will not budge. Any suggestions? |
|
Originally Posted By Phillbilly: Use punch to remove the retaining pin, while putting pressure on spring. Per Google. Also says its in the stock, which doesn't sound right 🤔. Also isn't the rec aluminum? Shouldn't be heating that up,correct? Bump I am referring to where it threads into the receiver. At this point I am fairly certain that it has been silver soldered into the threads. No way red loctite could have taken the heat I put on it. |
|
Originally Posted By wvfarrier: I finally got it. The tube got red hot before the shit let go. Sure glad I am replacing it😆 I just went through this with my 930 as I was swapping the stupid ass choate stock and putting a new Mesa Tactical Urbino stock on. That damn tube was a bitch but I was able to get it to break free after I pus a big enough pin through the spring retainer pin hole and then a breaker bar on it with the little socket head tool and. It was a bitch as they put that shit on with some strong ass loctite. |
The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government.
Armory Sponsor