Save up to 40% on Metalworking orders over $129

Enter Promo Code: MW40EN | Offer Valid 11/10/16

Special of the Week
6" Electronic Digital Caliper, Professional Grade



Z-Limit brand guarantees professional quality
Large, easy-to-read LCD display can be zeroed at any position
Automatic shut-off after 5 minutes of non-use, last measuring position retained when shut off
Hardened stainless steel body for long life, with fine adjustment thumb wheel
Resolution is 0.0005" (0.01mm) and linear accuracy meets DIN 862 standard
This 6" electronic digital caliper is made and inspected in the same factory as some of America's best-known brands.
The caliper measures four ways; outside, inside, depth, and step. The three keys are on/off, inch/mm, and zero.
Jaw Depths: 1 1/2" outside, 5/8" inside.
The CR-2032 battery is included. Includes a durable plastic case.


Special of the Week price: $47.95
Regular price: $54.95  Save 13%
Special of the Week pricing valid through Tuesday, November 15, 2016

8-inch digital caliper stock-up event: The more you buy, the more you save! Use code CALP8.
OUR 8" CALIPER
BUY MORE, SAVE MORE
EVENT WAS MEANT TO BE.


Stock up and save! Now's the perfect time
to load up on the extended range, digital 8" calipers you need.

Special tiered savings and quantity pricing
allow savings up to 55% off. Buy 1-4, 5-9,
or 10+ for maximum savings!


Shop Now


Use coupon code:
CALP8
Save up to 55%!
Coupon code CALP8 activates sale prices • Offer expires November 14, 2016

Save up to 50% on Measuring Instruments, Machine Tool Accessories & Tooling Components.

Start Saving Now

Enter Promo Code: MTL50 | Offer Valid Until 11/14/16 - 11/15/16

Save up to 25% on select product categories*

Enter Promo Code: MRO25W | Offer Valid 11/14/16 - 11/15/16

Product Lines Include: Safety & Janitorial, Material Handling & Storage,
Hand & Power Tools, Electrical, Pneumatics, Hardware, HVAC, Hose,
Tube & Fittings, Plumbing, Pumps, Paints & Adhesives, Packaging & Shipping.

SAVE 25% TODAY ONLY WITH
THE KEO WAREHOUSE SALE.

Improve hole finishes, tool life and your bottom line! Save 25% today only
on these industry favorites from KEO.
Available in a wide variety of angles, sizes, & coatings!

Shop Site Now

Use coupon code:
KEO
Save 25% on KEO countersinks.
Coupon code KEO activates sale prices • Offer expires November 15, 2016

Fall Machinery Blowout - Save up to 30% Plus Free Freight - Shop Now
Enter Promo Code: MACHFF | Offer Valid 11/15/16 - 11/22/16

Mall Madness, Minus Mall
6 Inch Standard Vise, 6 Inch Premium Vise Now on Sale!
Early Black Friday Pricing!!  Why wait?

The sale madness continues!  Just another week until Black Friday and our coupons just got even better.

New Quantity Discount Codes:

Glacern 6" Standard Vise - $339
 GSV1 - $60 off each GSV-690
 GSV4 - $250 off four GSV-690s (that's $336.50 each!)

Glacern 6" Premium Vise - $519
 GPV1 - $60 off each GPV-615
 GPV4 - $250 off four GPV-615s (that's $516.50 each)

Other Black November Deals
 15OFF200 - $15 off orders $200 or more
 100OFF850 - $100 off orders $850 or more
 40OFFGround - $40 off UPS Ground Shipping (Orders $200+ / Contiguous US)
CNC Machine Vise
GSV-690
$599.00 as low as $336.50

Glacern Standard 6" Vise
Order GSV-690
CNC Machine Vise
GPV-615
$799.00 as low as $516.50

Glacern Premium 6" Vise
Order GPV-615

REMOVE THE GUESSWORK
FROM ALL YOUR WORK.

The world's leading calculating, measuring and estimating devices for
contractors, professional tradesmen and do-it-yourselfers!

Easy to use, fast, accurate and reliable, these indispensable devices are
the futuristic answer to the old adage, "measure twice, cut once."
Shop Now
Save up to 25% on all Calculated Industries products! Use code CALC.
Coupon code CALC activates sale prices • Offer expires November 16, 2016

Save up to 30% on Metalworking orders over $279*
Enter Promo Code: FF199W | Offer Valid 11/16/16 - 11/17/16

Early Cyber Monday - Save up to 40% Plus Free Ground Shipping

Enter Promo Code: VIP40E | Offer Valid 11/16/16 - 11/18/16

Special of the Week
4-1/2" Angle Plate, Slotted and Webbed



4.5" long, 3.5" tall, and 3" wide
Accurately machined and ground square and parallel on outside and ends
Slots provide many options for mounting
Widely used for machining, layout, and inspection
High tensile cast iron is properly seasoned to prevent distortion
Looking for smaller sizes? We have those too.

Special of the Week price: $18.95
Regular price: $21.95  Save 14%
Special of the Week pricing valid through Tuesday, November 22, 2016

Originally Posted By brickeyee:
If no one has mentioned it expect to spend what the machine cost on the tooling to use it.

Luckily you can stretch the tooling out over an even longer time by 'making do.'

Try not to be like one of my machinist buds though.

He would run short of taps  in the middle og a job and call me at 2 AM needing something.

Murphy's Law says always but two of each size tap (at least).

Maybe they trade stories in the storage drawer but if you only have one it WILL break at the worst moment.

Probbaly below the surface in the work.

They seem to know what sizes of broken tap extractors are in the other drawer.

Save up to 25% on orders over 199*
Enter Promo Code: MSC25W | Offer Valid 11/18/16

Get free shipping on Sunex carts! Use code SUNEX.
Safely and swiftly transport up to 500lbs. easily with these heavy duty utility carts!
Designed to withstand any workspace, these carts are manufactured from structural foam,
making them easy to manaeuver and impervious to most liquids.

Shop Site Now
Use coupon code:
SUNEX
*Offer valid 11/18/16 only
Free UPS ground shipping is valid for 99-011-623 and 99-011-622, within continental U.S. only.
Coupon code SUNEX activates free shipping & sale prices • Offer expires November 18, 2016

Black Friday Sale

Thursday thru Monday
Nov.24 - Nov.28
20% off*
Online Only
Coupon Code: blackfriday
*Certain Exclusions apply

Something's up?  You got that right, but it's not prices on our CNC Software.
I just launched our annual Black Friday Sale Week.  All our CNC Software is marked down 15% from our usual prices.

Here's the straight scoop:

You get 15% off on all our CNC Software.  Just visit our Products page to see what all we have to offer.  You'll see the discount taken in the Shopping Cart, so click-through to see what your savings will be.  If you want the really special deals, visit our Cheapskate Page.  There you'll find multi-product bundles and volume discounts.

If you want to look quickly, go to our product pricing pages, click-through to the shopping cart, and check your discount.  Pricing for every product can be accessed by clicking the "Pricing" menu pick from the product home page.

Here are just some of the deals to be found in this sale:

–  Get a 3 year subscription to GW Calculator for $109.99 instead of the regular $129.
–  Get a lifetime subscription to GW Calculator for just $211.65 instead of our regular $249.
–  Get a 3 year subscription to GW Editor for $169.99 instead of $199.
–  Get a lifetime GW Editor for $254.99 instead of $299.

Want both?  Try these deals:

–  Get 3 years of GWC and GWE for $254.99 instead of $299.
–  Get lifetime GWC and GWE for $373.99 and save over $65.

There's lots more on sale including MeshCAM and Gearotic, but the sale is ending soon–we'll close it at the end of Cyber Monday (who comes up with these names?). That's right, the sale ends Monday, November 28.

And be sure to do your CNC friends a favor–pass along the news that we're having a sale.  They'll appreciate hearing about it.  Don't make 'em wait until they're looking at the software you just bought and have to tell them they can no longer get the sale price.  It's easy, Tweet, Share the story on Facebook, send an Email, post on your favorite CNC Community, or just mention it the next time you see your buddies.

Cheers!

Bob Warfield
CNCCookbook

Get up to 10% OFF your entire order during Glacern's Extended Black Friday Weekend!
BLACK FRIDAY COUPON CODES

GIMME20 - $20 off Orders $200+

FREEGROUND - Free UPS Ground on all Vises

BLKFRIDAY2016 - 8% off orders $800+

THANKYOU - $300 off orders $3000+ (10% discount)

November 21st-22nd
Two Days only!
Thanksgiving Sale
our way of thanking YOU!

20% OFF

Not valid on previous purchases, may not be combined with any offer

You must mention GOBBLE16 for your discount

Thank You for your Business - Save up to 30%
on orders over $249 Or Save up to 25% on orders over $149

To save up to 30%, Enter Promo Code: NOV30W
To save up to 25%, Enter Promo Code: NOV25W
Offer Valid 11/21/16 - 11/23/16

Thank You for your Business - Save up to 40% on orders over $149 Or Save up to 35% on orders over $99
Log in today with your MSC User Name _____-MSC to activate savings up to 40% off!

Log In And Save Now

To save up to 40%, Enter Promo Code: SV40
To save up to 35%, Enter Promo Code: SV35
Offer Valid 11/21/16 - 11/23/16

Buy one cart, get one worktable free - Plus free shipping!
Full Drawer Professional
Duty Cart
Item #: 99-011-633
Model #: 8057BK
A total value of $1,495.99 for just $679.99!*
Shop Site Now

Use coupon code:
DAY2
Save 55% on Sunex's Professional Duty Cart, and get a free worktable - a $119 retail value.
Digital Deals

Save up to 55% on digital measuring tools!

Shop Site Now

Use coupon code:
DAY2
Save up to 55% on digital measuring instruments.
*Offer valid 11/22/16 only.
Free UPS ground shipping is valid for 99-011-633 only, within continental U.S. only.
Coupon code DAY2 activates sale prices • Offer expires November 22, 2016

Daily Deals Day 3:
SAVE OVER 30%
ON SELECT CUTTING TOOL SETS
Use coupon code: DAY3

Save up to 43% on lathe accessories. Use code FAVACC.

Jobbers Length Twist
Drill Set (115 piece)
Item #: 01-001-903
$99.99
Reg. Price: $179.99


Tap & Drill Index & Set
Item #: 01-800-100
$24.99
Reg. Price: $53.85


20 Piece High Speed Steel TiN Coated Single End Mill Set
Item #: 09-335-905
$74.99
Reg. Price: $107.99

Coupon code DAY3 activates sale prices • Offer expires November 23, 2016

Special of the Week
Center It V-Block



CENTER IT is a tool for drilling pipe, tubing, and round stock, enabling you to easily drill squarely on center using a drill press or mill. Simply run a stationary bit down to center the fixture and then bolt the CENTER IT to the drill press (or mill) table. No clamping of the tube is necessary since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center-punching required. If tubing is too large to drill in a single operation it can simply be turned over.
Especially for the metalworking enthusiast, the woodworking hobbyist, and even the professional automotive mechanic, CENTER IT makes speedy and precise work of drilling tasks. Its "hand vise" grip ridges allow no-clamp holding of round stock for sawing and cutting.
CENTER IT is made of heavy aluminum extrusion.
CENTER IT is 5" (127 mm) long, 4" (102 mm) wide, and 1-3/4" (44 mm) high. The groove at the base of the V is 0.43" (11 mm) wide, so use a drill bit smaller than this to center the CENTER IT.

Special of the Week price: $12.95
Regular price: $18.95  Save 32%
Special of the Week pricing valid through Tuesday, November 29, 2016

Save up to 30%* or 25%*
To save up to 30%, Enter Promo Code: BIG30W
To save up to 25%, Enter Promo Code: BIG25W
Offer Valid 11/28/16 - 11/29/16

Regular PriceSale Price

Electronic Digital Caliper, 6" Fractions$34.95
$24.95

LED Machine Light with Magnetic Base$64.95$58.95

Bore Gage Set$89.95$74.95

V-DrillGuide Hand Drill Guide for Inch Drills$27.50
$25.00

V-DrillGuide Hand Drill Guide for Metric Drills
$27.50
$25.00

SpillMaster Container$5.95
$4.95

Belt Drive Conversion Kit for Mini Mill$154.95
$139.95

Dial Indicator, Test Indicator, Magnetic Base, and Point Set
$59.95
$53.50

Ultra Precision 1-2-3 Blocks$29.95$24.95

LED Flashlight with Magnetic Base$23.95$19.95
We have lots more items on sale this weekend; this is just a sampling! Other items include:
Books: Running an Engine Lathe and The Care and Operation of a Lathe
Starrett hacksaw frames and blades
Coolant tanks and pumps
Machinist Calc Pro 2 machinists calculator
Collet racks
Drill chucks
Screw pitch gages
Vises
...and many more
For a complete list, visit www.littlemachineshop.com/sale

Sale pricing valid through Monday, November 28, 2016

Originally Posted By RED_5:
Shars


blackfriday for upto 20% off

man, I'm in the middle of other projects.. but this looks like a decent deal @ $732.xx

http://www.shars.com/products/toolholding-workholding/grinding-fixture-machine/universal-cutter-sharpener-1

Hex and Square Collet Block Set



This set provides an economical indexing tool for 2, 3, 4, and 6 divisions, and allows for easy cross drilling at 60, 90, and 120 degrees. It's ideal for milling round workpieces. You put your workpiece (such as a piece of rod) in a standard 5C collet, put the collet in one of these blocks, and then clamp the block to your table.
The set includes five pieces: a square block, hexagonal block, two quick-acting rings, and a lever-operated collet closer. It's made of hardened tool steel, and the blocks are ground square and parallel within 0.0005" all over.
And don't forget the collets! We sell 5C collets (which range in size from 1/16" to 1-1/8") individually and in sets.


Special of the Week price: $54.95
Regular price: $64.95 Save 15%
Special of the Week pricing valid through Tuesday, December 6, 2016

Save up to 30% on orders over $299* Plus FREE Ground Shipping on online orders.
Enter Promo Code: WEB30W | Offer Valid 11/30/16

Special of the Week
Collet Chuck for 5C Collets



This 5C collet chuck is 5" (130 mm) in diameter, and it has a capacity of 1/16" to 1-1/8" with appropriate 5C collets. It mounts like a lathe chuck, using three holes for M8 cap screws that are through drilled and counterbored for bolting on from the front. The registration inset is 95 mm in diameter, and the through hole is 1.231" (31.27 mm).

To mount this collet chuck on a mini lathe, use this adapter; for other lathe types, choose from this list.
Special of the Week price: $279.95
Our usual great price: $299.95  Save 7%

Special of the Week pricing valid through Tuesday, December 13, 2016

20% Off! EVERY Item in our Measuring, Marking, Vision Dept.
Sale ends 11:59 pm ET Wednesday, January 25, 2017.

Best deals of January!
All Single Vises on Sale!

Good news everyone!  Some of our most popular vises are on sale this month.  
Coupled with some new coupons, you can get your precision tooling at fantastic prices and even get to free shipping on smaller vises.

Best January Coupons:

Coupon:  50OFF500 - $50 off orders over $500+
Coupon:  TAKE5 - Take 5% off orders over $1500+
Coupon:  50OFFGROUND - $50 off UPS ground

Vise Sale:

Standard Vises: The Classic Machine Vise
 GSV-440 - 4" Standard Vise - $349
 GSV-550 - 5" Standard Vise - $369
 GSV-690 - 6" Standard Vise - $379


Premium Vises: Ground sides, Thru-Holes to save table space
 GPV-615 - 6" Premium Vise - $549
 GPV-615R - 6" Reversed Premium Vise - $549
 GPV-412 - 4" Premium Vise - $599

All January Deals
CAT40 ER Collet Chuck Packs
Collet Chucks (CAT40)
+ Pull Studs
+ Spanner Wrench

6-Packs - $599
12-Pack - $1175
*email us for custom pack pricing

ER collet chucks are the most commonly used toolholders for milling with that near-optimal combination of accuracy and economy.
Collet Chuck List
Carbide Inserts on Sale!
45° Gen Purpose - $99.99  
45° Aluminum - $149.99
45° Hard Steels - $199.99


Inserts for FM45 Series Facemills
*10 inserts per pack

45° Facemills for roughing and finishing various metals.  These come in 2" to 5" sizes for many applications.  All inserts have 4 cutting edges.
Buy Online at Glacern.com or call 310-570-CNC1

If you've thought about making the move to CNC, there's no better time. This week we're offering our newest CNC milling machine, the model 3502, at an astounding $300 off the regular price. Yep, that's (by far) the biggest discount we've offered on a weekly special.
The 3502 is based on our time-tested model 3501, with the addition of an enclosure to contain chips, coolant, and noise -- and enhance safe operation. During this sale, it's like getting a model 3501 -- with a free enclosure.
Special of the Week
CNC Milling Machine with Enclosure



The LittleMachineShop.com model 3502 CNC Milling Machine is a complete CNC solution that incorporates our time-tested model 3501 in a sturdy enclosure. It's not a conversion or adaptation; this machine is designed and built by the factory as a CNC machine. The power supplies and controllers are built into the mill. No extra cabinets, cables, or connectors are required. The model 3502 CNC milling machine includes a 4th axis driver so you can add a 4th axis rotary table by simply plugging it in.
With powerful NEMA 23 hybrid stepper motors connected by zero backlash jaw couplings to precision-ground ball screws, the model 3502 can achieve positioning accuracy to 0.0005". Not many hobby-grade machines can make a claim like that. It will machine at up to 20 inches per minute and rapid traverse at up to 80 inches per minute.
A 2/3 horsepower closed loop brushless DC spindle motor and synchronized belt drive takes the spindle from 100 to 7000 rpm under full CNC control. A one-shot oiler with flexible shielded lube distribution tubing takes care of daily lubrication with a single press of a lever.
With a work envelope of 10.2" (X-axis) x 4.3" (Y-axis) x 7.1" (Z-axis) the model 3502 has large capabilities in a small machine. The mill table is 15" x 5.38", giving you plenty of room to mount your work and fixtures.
A software controlled receptacle on the back of the machine provides CNC control of an optional mist or flood coolant system.
This is the machine only; a computer with Mach3 controller software and tooling must be purchased separately.

Special of the Week price: $3995.95
Regular price: $4295.95 Save 7%
Special of the Week pricing valid through Tuesday, January 24, 2017

Rushmore USA - Expanded end mill offering, including: Miniature 3 Flute, Variable Helix Unequalled Index, & Corner Rounding Double End
RELY ON RUSHMORE.
Gain shop productivity with these made-in-the-USA products.
The Rushmore mission is to ensure the highest quality and highest consistency tooling in the industry.
Through advanced manufacturing processes, this completely automated line of solid carbide cutting tools &
high speed cutting tools provides American grade tooling at competitive pricing.

SHOP SITE NOW
Use coupon code: L30