Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
8/18/2026 4:17:13 PM EDT
[Last Edit: NAM][Edited]
I have an outdoor power meter that has a main breaker on it. It's designed for a standard padlock, but it would be easy enough to grab the padlock and twist it, breaking the tab off. I guess you could do the same by cutting off the power company tamper tag and pulling the meter. That said...I'm looking for a decent lock that would keep the casual passerby out, while not making it easier for someone to use the lock itself as leverage.

Style of meter base:


ETA: the goal is to lock the flap covering the main breakers.

8/18/2026 5:31:58 PM EDT
[#1]
"back-inna-daze" before cellphones;friends had a river property that was used on weekends.....w/ a phone attached to a utility pole that was inside a weatherproof lockable box.....   may find something similiar
8/19/2026 11:15:49 AM EDT
[#2]
Better talk to the Power company first.
8/19/2026 11:17:41 AM EDT
[Last Edit: ark-and-spark][Edited] [#3]
Quote History
Originally Posted By BB4XL:
Better talk to the Power company first.
View Quote




This

They tend to be a little picky.
8/19/2026 11:29:56 AM EDT
[Last Edit: NAM][Edited] [#4]
Quote History
Originally Posted By BB4XL:
Better talk to the Power company first.
View Quote



...about locking MY side of the panel?

ETA: They can remove their tamper tag, and completely bypass my lock.
8/19/2026 2:00:26 PM EDT
[#5]
Quote History
Originally Posted By NAM:



...about locking MY side of the panel?

ETA: They can remove their tamper tag, and completely bypass my lock.
View Quote

It’s your side but it’s a self contained meter/panel so it’s probably the power company’s property.
8/20/2026 7:33:51 AM EDT
[#6]
Anything after the meter is on the homeowner, generally. As the OP said, the power company can still open the top half to do anything they need to do

The power company probably doesn't care, but the fire department might. You may be required to have an emergency disconnect

If that's not an issue you could bend a strap or angle iron to go across the front


8/20/2026 7:35:45 AM EDT
[#7]
Quote History
Originally Posted By BB4XL:
Better talk to the Power company first.
View Quote


That set up is fine as long as the meter tamper proof seal is intact and you lock only the breaker side.

[utility guy for almost 4 decades]
Liberals are a curious mix of communism and fascism, they want to destroy you but want to use your own money to do it.

I'm getting down to the last box, the others have all been destroyed...
8/20/2026 7:37:17 AM EDT
[#8]
Quote History
Originally Posted By scottr:
Anything after the meter is on the homeowner, generally. As the OP said, the power company can still open the top half to do anything they need to do

The power company probably doesn't care, but the fire department might. You may be required to have an emergency disconnect

If that's not an issue you could bend a strap or angle iron to go across the front


View Quote


Fire departments will cut the meter seal and pull the meter just like the utility does. If the box is affected the utility will cut service at the pole and loop the drop.
Liberals are a curious mix of communism and fascism, they want to destroy you but want to use your own money to do it.

I'm getting down to the last box, the others have all been destroyed...
8/20/2026 11:04:56 AM EDT
[#9]
Quote History
Originally Posted By fxntime:


Fire departments will cut the meter seal and pull the meter just like the utility does. If the box is affected the utility will cut service at the pole and loop the drop.
View Quote
That doesn't meet code...

https://www.electricallicenserenewal.com/Electrical-Continuing-Education-Courses/NEC-Content.php?sectionID=847.0
8/20/2026 11:36:02 AM EDT
[#10]
Quote History
View Quote View All Quotes
View All Quotes
Quote History
Originally Posted By scottr:
Originally Posted By fxntime:


Fire departments will cut the meter seal and pull the meter just like the utility does. If the box is affected the utility will cut service at the pole and loop the drop.
That doesn't meet code...

https://www.electricallicenserenewal.com/Electrical-Continuing-Education-Courses/NEC-Content.php?sectionID=847.0


I never saw a single one in almost 40 years unless it was on a trailer/manf house in a park or the customer had a generator. We gave out the meter boxes and I know we never stocked them at any time up to my retirement.
Liberals are a curious mix of communism and fascism, they want to destroy you but want to use your own money to do it.

I'm getting down to the last box, the others have all been destroyed...
8/20/2026 11:40:59 AM EDT
[#11]
Just put a small padlock on it, that will stop the casual passerby. The fire department will cut the lock in the event they need to. The small lock won’t give much leverage.

You really can’t secure this very heavily because of the nature of the thin metal tab and the way the cover over the disconnect is made.
8/20/2026 6:29:48 PM EDT
[#12]
Quote History
Originally Posted By McGarrett:
You really can’t secure this very heavily because of the nature of the thin metal tab and the way the cover over the disconnect is made.
View Quote


And that makes sense. But ant idiot being able to walk up and kill my power kind of bugs me...

...but as mentioned earlier, any idiot could clip tge tamper seal and pull the meter, so maybe its a mostly moot point.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor