Armory Sponsor
KAC Values (Page 43 of 53)
|
I got this ECR waaaaay back in 2015 from Boltcarrier.com. That was around the time that KAC was doing some SR25 special releases, like the painted delta ECM rifles. Anyway, this one wasn't as cool since it had the big thick heavy barrel and was 20". Here's the Small Arm Sales info page on it: https://www.smallarmsales.com/Knight-s-Armament-SR-25-Limited-Run-ECR-Rifle-p/31751.htm I guess back then they really were only like $4k, which seemed like quite a lot at the time. I had Ayan at Boltcarrier dimple the barrel to match the KAC dimple profile pretty much exactly. In that regard it makes this ECR unique, but now it's not really in the factory original condition. Mine also has a QDC flash hider and Geissele SSA-E trigger, and as you can see, it's painted (Aervoe paint). I'm curious what it's worth now, considering the SR25 blow up. It probably has between 200-300 rounds through it. I'm wondering if I could move out of this thing and into a 14.5" 6.5CM upper, seeing as how those things are pretty damn rare now too. Attached File Attached File Attached File Attached File Better view of the barrel dimples before I painted the rifle: Attached File |
The law perverted! And the police powers of the state perverted along with it! The law, I say, not only turned from its proper purpose but made to follow an entirely contrary purpose!
Not super familiar with KAC gear, but I have this, and I believe it is a M4 RAS? It has never been mounted, in as new condition, been in storage for years. The pouch says Vero Beach on it, the VFG Titusville. The pouch is the only thing that is not pristine, it does not have any rips or tears, but it has that vinyl "sweat" on it from being stored. Kind of sticky. Any help with value on this would be greatly appreciated.   
|
|
Im going to have a 14.5 MOD2 upper with notched upper, radian CH and standard E3 bolt, no pin and weld. Also going to pair it with an SR15 ambi lower, less the trigger. Could include a G2s. Both in excellent condition. Lower has a few marks, upper has only 2-300 on it. Any idea what the value of that would be together to someone who will SBR it or do a P/W of their own choosing? |
|
M110 conversion full conversion. SR25 APR upper / barrel converted to M110 specs with double gas block, URX II, single ejector E3 bolt and correct bipod and mount. M110 FH. Will cleanly accept the correct KAC suppressor. Lower is marked SR25 and has SR25 trigger etc. Correct M110 stock with correct buffer. Everything (including correct CH) was cerikoted KAC taupe color. I was told was done by NS armory when I got it years ago. Has correct Leupold Mk4 Illuminated scope (tan) in a taupe KAC mount and KAC rear sight. Curious as to current value range as I see similar or inferior (less factory parts) on GB just sitting so obviously over priced. Definitely used (including with the can). |
|
Originally Posted By nitmr26: What’s the current market price for an unfired KAC SR-25 ACC? The original URX 4 (keymod) was replaced with a URX 3.1 when I purchased it in 2019. Thanks in advance. I split mine last fall… sold the lower for 2k, the upper for 3.85, and a couple of mags for a few hundred. |
|
Originally Posted By anykey: Not super familiar with KAC gear, but I have this, and I believe it is a M4 RAS? It has never been mounted, in as new condition, been in storage for years. The pouch says Vero Beach on it, the VFG Titusville. The pouch is the only thing that is not pristine, it does not have any rips or tears, but it has that vinyl "sweat" on it from being stored. Kind of sticky. Any help with value on this would be greatly appreciated. https://i.postimg.cc/pLXYjvbk/IMG-5099.jpg https://i.postimg.cc/MGLDxFL5/IMG-5102.jpg https://i.postimg.cc/cJvRDcJn/IMG-5103.jpg https://i.postimg.cc/QxDqX5f2/IMG-5104.jpg Any help on this? |
|
Originally Posted By hkx3: I've avoided this, but the time may have come. I have a factory built ECC. Looks 99.9% perfect. Has been fired somewhere in the 50 round range. Has every single thing that it shipped with. I ordered it new. Wearing a NF ATACR. Atlas Bipod. Base rifle would be in the 12k-13.5k I would say. I’m sure someone will correct me if I’m wrong. As for the ATACR and bipod, that would be dependent on model and such, but would still be less than msrp being used an all. Unless the ATACR was high in demand, but low in supply kind of deal. |
|
Originally Posted By hkx3: I've avoided this, but the time may have come. I have a factory built ECC. Looks 99.9% perfect. Has been fired somewhere in the 50 round range. Has every single thing that it shipped with. I ordered it new. Wearing a NF ATACR. Atlas Bipod. A brand new one recently went for $12.5. Yours would be a smidge below that. Maybe $11-11.5 in a private sale? Your best outcome would be to put it on Gunbroker starting around $11 with no reserve and see where it goes. |
|
Originally Posted By hkx3: Thanks guys. I think I can part the rifle out and get more than the numbers being discussed here. Makes me sad. How do you figure? Its best value is going to be as a complete gun. There is nothing inherently special about the individual parts other than the barrel, rail (maybe) and ladder-style offset BUIS set. |
|
Originally Posted By hkx3: Case in point Originally Posted By hkx3: Originally Posted By M4ger: 1300-1600. Case in point Your ECC has a 7.62 URX 3.1 rail. A rifle-length URX II (for 5.56, not even sure there is a 7.62 version?) is an exceedingly rare rail. The rail on your ECC occasionally pops up for sale (and KAC still shows it on their site, so it’s most likely still being made in batches). In any case, it’s your gun, so best of luck. |
|
Originally Posted By hkx3: Thanks guys. I think I can part the rifle out and get more than the numbers being discussed here. Makes me sad. I'd be interested in your by part breakdown of how you think you will come out ahead by parting out that rifle??? E Series SR25s are a national treasure worthy of preservation ...Only worse sacrilege than you are suggesting are those who defile old school SR25 Match barrels |
|
Originally Posted By anykey: Not super familiar with KAC gear, but I have this, and I believe it is a M4 RAS? It has never been mounted, in as new condition, been in storage for years. The pouch says Vero Beach on it, the VFG Titusville. The pouch is the only thing that is not pristine, it does not have any rips or tears, but it has that vinyl "sweat" on it from being stored. Kind of sticky. Any help with value on this would be greatly appreciated. https://i.postimg.cc/pLXYjvbk/IMG-5099.jpg https://i.postimg.cc/MGLDxFL5/IMG-5102.jpg https://i.postimg.cc/cJvRDcJn/IMG-5103.jpg https://i.postimg.cc/QxDqX5f2/IMG-5104.jpg $300’ish |
|
Originally Posted By Kgknight1037: Is there any worth in a urx 3.1 barrel nut wrench and a urx 4 barrel nut wrench? I have 1 of each and do not have any knights rails to use them on. THank you I'm unsure about now, but the 3.1 wrench was/is hard to find. A couple of members have an ad in the EE renting theirs out. The 4 seems to be easy to find, but I'm sure would sell easily. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: I'm unsure about now, but the 3.1 wrench was/is hard to find. A couple of members have an ad in the EE renting theirs out. The 4 seems to be easy to find, but I'm sure would sell easily. Originally Posted By SecretSquirell: Originally Posted By Kgknight1037: Is there any worth in a urx 3.1 barrel nut wrench and a urx 4 barrel nut wrench? I have 1 of each and do not have any knights rails to use them on. THank you I'm unsure about now, but the 3.1 wrench was/is hard to find. A couple of members have an ad in the EE renting theirs out. The 4 seems to be easy to find, but I'm sure would sell easily. There are some URX2/3/3.1 wrenches available through DWilson/Classified Defense. It is the style where the gas tube and block must be removed. |
Let's get after it.
For the glory of the empire, so say we all.
For the glory of the empire, so say we all.
|
Originally Posted By KWCAM: I'd be interested in your by part breakdown of how you think you will come out ahead by parting out that rifle??? E Series SR25s are a national treasure worthy of preservation ...Only worse sacrilege than you are suggesting are those who defile old school SR25 Match barrels Originally Posted By KWCAM: Originally Posted By hkx3: Thanks guys. I think I can part the rifle out and get more than the numbers being discussed here. Makes me sad. I'd be interested in your by part breakdown of how you think you will come out ahead by parting out that rifle??? E Series SR25s are a national treasure worthy of preservation ...Only worse sacrilege than you are suggesting are those who defile old school SR25 Match barrels I'd cut it in half with a chop saw if I thought it would bother you as much as it seems. I don't give a shit about anything man made. This type of response is the exact reason I am getting out of collecting. Let all your national historians enjoy tying your money up. |
|
Originally Posted By hkx3: I'd cut it in half with a chop saw if I thought it would bother you as much as it seems. I don't give a shit about anything man made. This type of response is the exact reason I am getting out of collecting. Let all your national historians enjoy tying your money up. Originally Posted By hkx3: Originally Posted By KWCAM: Originally Posted By hkx3: Thanks guys. I think I can part the rifle out and get more than the numbers being discussed here. Makes me sad. I'd be interested in your by part breakdown of how you think you will come out ahead by parting out that rifle??? E Series SR25s are a national treasure worthy of preservation ...Only worse sacrilege than you are suggesting are those who defile old school SR25 Match barrels I'd cut it in half with a chop saw if I thought it would bother you as much as it seems. I don't give a shit about anything man made. This type of response is the exact reason I am getting out of collecting. Let all your national historians enjoy tying your money up. IM sent. |
|
Originally Posted By bbridson: What are the stripped non-ambi receivers going for nowadays? I see a few pop up on gunbroker for ~$1,200 but I'm pretty sure that's just some dude's wishful thinking. Might be normal for GB folks. Ones have listed and sold on the EE for $700 to $800 recently. Set of 5 just went for $700 each. |
|
Originally Posted By Deadsquiggles: What’s the going rate on a SR-15/16 FF RAS rifle length, 99167 now? I’m having a hard time believing the few I’ve seen on GB, especially since they aren’t selling for what they’re listed. $1500-$2800 and not selling tells me that ain’t what they’re worth. This M4 Match marked one just sold for over $2500. Attached File I guess the price one is willing to pay depends on how serious they are when it comes to cloning. |
|
Originally Posted By DRF: This M4 Match marked one just sold for over $2500. https://www.ar15.com/media/mediaFiles/417854/IMG_0778_jpeg-3176378.JPG I guess the price one is willing to pay depends on how serious they are when it comes to cloning. So probably somewhere around $1k? |
|
Originally Posted By Deadsquiggles: So probably somewhere around $1k? Originally Posted By Deadsquiggles: Originally Posted By DRF: This M4 Match marked one just sold for over $2500. https://www.ar15.com/media/mediaFiles/417854/IMG_0778_jpeg-3176378.JPG I guess the price one is willing to pay depends on how serious they are when it comes to cloning. So probably somewhere around $1k? If you're rushing to sell, that is probably a good price. |
Let's get after it.
For the glory of the empire, so say we all.
For the glory of the empire, so say we all.
|
Originally Posted By anykey: Not super familiar with KAC gear, but I have this, and I believe it is a M4 RAS? It has never been mounted, in as new condition, been in storage for years. The pouch says Vero Beach on it, the VFG Titusville. The pouch is the only thing that is not pristine, it does not have any rips or tears, but it has that vinyl "sweat" on it from being stored. Kind of sticky. Any help with value on this would be greatly appreciated. https://i.postimg.cc/pLXYjvbk/IMG-5099.jpg https://i.postimg.cc/MGLDxFL5/IMG-5102.jpg https://i.postimg.cc/cJvRDcJn/IMG-5103.jpg https://i.postimg.cc/QxDqX5f2/IMG-5104.jpg Around $300 for everything in that picture |
|
Originally Posted By Toothpicksandkatchup: Did we ever come up with a price for a 870 RAS. Iv'e seen it mentioned a few times, but really no real value to go off. There’s been one on GB for months priced at 1800-2000 and it’s not moving. I’m guessing somewhere in the 1200-1500 range. |
Joined:
Jul 2022
Posts:
127
EE: 100% (24)
OK, USA
| Hey guys I have a brand new 09’ small print and 12’ large print FF I want to offload, thinking on asking about 1k, both are obviously the old part number 99167, Titusville, FL. Any help would be awesome, thanks! Dude has one on GB for 3K???????? |
|
Originally Posted By Embittered: Probably time-limited until the PRG CQB is out. Originally Posted By Embittered: Originally Posted By mdavis: +/- $3-3.5k. If it's on a Form 4, maybe a bit lower. Probably time-limited until the PRG CQB is out. Maybe. Some of us dumb-dumbs still might pay a premium for the old version. I know I will if I can find a near-new or NIB 556QDC in black. 
|
KAC Values (Page 43 of 53)
Armory Sponsor