Armory Sponsor
Posted: 3/13/2026 10:02:39 PM EDT
| Has anyone submitted an eForm 1 for an integral suppressor? I was wondering if there is anything extra that needs to be added to the form, like pictures or drawings of what I want to make. |
|
I did one for a CZ457. I bought a barrel to use for it. CZ put SN on barrel so I used that, and 22LR as the model. I included pics of the barrel and close ups of the markings. I'll engrave maker, location, and caliber. I chose to use a model name (not required) for faster approval |
|
Originally Posted By maggiethecat: I did one for a CZ457. I bought a barrel to use for it. CZ put SN on barrel so I used that, and 22LR as the model. I included pics of the barrel and close ups of the markings. I'll engrave maker, location, and caliber. I chose to use a model name (not required) for faster approval So no drawings submitted? Was it approved yet? |
|
Originally Posted By neuromancer1970: Wierd I just asked this question I should have scrolled down So I could use the SN from the pistol as the SN for the suppressor What's your design like? How much barrel vs suppressor K baffle ? What's your accuracy like |
|
Originally Posted By neuromancer1970: Wierd I just asked this question I should have scrolled down So I could use the SN from the pistol as the SN for the suppressor What’s your design like? How much barrel vs suppressor K baffle ? What’s your accuracy like You can use the pistol serial number as the s/n for the can. My design is a copy of AB Littlebird, but it's the barrel, not an add on device. 13" of barrel, 7" threaded suppressor area with moveable baffles. Not K, look at the AB Littlebird. Havent checked it yet, not even done building baffles. @ neuromancer1970 |
Armory Sponsor