Armory Sponsor
Posted: 10/17/2023 11:24:05 PM EDT
|
I bought a couple RPD kits in 2011 along with some 80% receivers, but the barrel hole is solid. Anyone have a drawing of a proper lower so that I can unfuck my first attempt? 
|
Critical thinking is dead.
|
Originally Posted By Third_Rail: I don't have a drawing handy but I'll have a receiver with the barrel pressed out of it in the next month once I get to it. What measurements exactly do you need? |
Critical thinking is dead.
|
@Cole2534 To the centerline of the barrel bore: 1.023" from the tall side of the receiver bottom .776" from the short side of the receiver bottom .523" from the bottom of the action shelf This particular receiver is a semiauto DSA and the barrel bore is .930". Picture to follow. ETA: Simple picture just so it's clear what I meant about the tall and short sides. 
|
|
Originally Posted By Third_Rail: @Cole2534 To the centerline of the barrel bore: 1.023" from the tall side of the receiver bottom .776" from the short side of the receiver bottom .523" from the bottom of the action shelf This particular receiver is a semiauto DSA and the barrel bore is .930". Picture to follow. ETA: Simple picture just so it's clear what I meant about the tall and short sides. https://i.imgur.com/MAvokDr.jpg |
Critical thinking is dead.
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter