Armory Sponsor
Posted: 5/17/2026 3:27:06 PM EDT
|
First off, I don't know anything about wood refinishing. I cobbled up this suppressed takedown 10/22 and the wood on the stock was originally WAY darker than the forend. (two different sources) I was able to lighten it up a bit, but the wood on the stock is rough open grain and the forend is nice and smooth. I would rather not dick with the forend, but want to get the stock to match it better. Any ideas on how to do that? Tony   |
| The fore end looks like walnut while the receiver is birch. Sand it smooth to 300 grit and apply a sealer then stain the piece with a non penetrating stain; something dark brownish. Apply finish once stain iss dry. You will never get birch to match walnut but it will look better. |
Member
Joined:
Jun 2022
Posts:
13551
EE: 100% (30)
TX, USA
|
Originally Posted By Mindless: The fore end looks like walnut while the receiver is birch. Sand it smooth to 300 grit and apply a sealer then stain the piece with a non penetrating stain; something dark brownish. Apply finish once stain iss dry. You will never get birch to match walnut but it will look better. Agreed |
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
Joined:
May 2023
Posts:
445
EE: 0% (0)
USA
| the ONLY way you will have a shot will be to sand both parts and refinish at the same time , sand around/up to the checker but leave the checker be , hand sand , and just take your time a little here , little there and you will get it done , trying to match you are just making it harder on yourself when you finally reach the conclusion ,and you will that you need to do both parts over and at the same time |
Joined:
May 2023
Posts:
446
EE: 0% (0)
USA
Joined:
May 2023
Posts:
447
EE: 0% (0)
USA
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter