Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
8/3/2026 11:42:32 PM EDT
Thinking of getting some .444 Marlin brass and wondering if they usually have a black Friday or Labor Day sale i should wait for.

I am not an AFT agent.
8/4/2026 8:03:00 AM EDT
[#1]
I've picked up all my Starline from either Powder Valley, or Mid South Shooters on sale.  Sometimes Midway has it pretty low too.  Have never ordered from the source but can't imagine it is cheaper there.
8/4/2026 1:50:31 PM EDT
[#2]
I buy my Starline brass directly from Starline.

It is cheaper then buying it from a retail source.

And Starline ships for free.


Thanks for starting a thread to ask your question.
Selling agent for Algores carbon credit scam.

Shooting and Reloading, one hobby feeds the other.
8/4/2026 2:12:20 PM EDT
[Last Edit: ZA206][Edited] [#3]
How good is Starline rifle brass? What's it equivalent to?

I've never used it.
derp...
8/4/2026 2:31:49 PM EDT
[#4]
I have never had a problem with handgun brass from starline.
My rifle experience is limited to 308 Win.  It is lighter than most brands.  Worked ok, but not the best case life.
jme and I am a NRA Endowment Member

Don't be too timid and squeamish about your actions. All life is an experiment. The more experiments you make the better.
R W Emerson
8/4/2026 6:58:02 PM EDT
[#5]
Quote History
Originally Posted By ZA206:
How good is Starline rifle brass? What's it equivalent to?

I've never used it.
View Quote

It’s not Lapua brass, but it’s typically really good brass.

My experience with their products has been that the brass is really consistent, rifle and pistol.

One thing to note: keep your eyes on their inventory.  They run batches of calibers, so some of their less-common calibers may or may not be in stock when you want them.

Like dryflash3, I’ve always found prices direct from Starline to be better than from resellers.  I only go with resellers when I have ignored my own advice above and suddenly need a cartridge they don’t have in stock at the factory.
8/4/2026 7:53:59 PM EDT
[#6]
Midway did a couple years ago on starting brass. I picked up 500 pieces of 44 mag on the cheap.
8/10/2026 12:53:12 AM EDT
[#7]
Is star line better than federal in 556??
8/11/2026 2:13:55 AM EDT
[#8]
It is no better than everyone elses brass. Split cases, Primer pocket depth all over the place. Pocket diameter all over the place. Pockets that don't have a bevel to make primers go in a little easier, almost like a crimped pocket.

I have it in 45acp. 357mag is all over the place for everything that cold be wrong. 44mag the pockets are all over the place also. 223 split in the body, was replaced but not covering the 200rds loaded that had to come apart. 380 has been good. 350 Legend is a little thin compared to other brass.

this 223 brass was first firing. Brand new WOA SPR barrel and matched bolt. It was replaced but lost a bunch of components because of it.

8/11/2026 9:09:57 AM EDT
[#9]
I run Starline in a 45 Colt lever anywhere from light to pretty hot.  I think the straight wall brass is really good.
Also run it in 6.5Grendel.  What I load, the brass is good for no more than 4 firings before a primer won't stay in it.
8/18/2026 1:06:44 PM EDT
[#10]
In the past Starline would drop prices on some of their brass. No idea if they still do,
If you think I am sexy now just wait until you find out I have full medical and dental.
Personal pronouns are; Bro/Dude
8/19/2026 2:29:39 PM EDT
[#11]
Quote History
Originally Posted By GHPorter:

It’s not Lapua brass, but it’s typically really good brass.

My experience with their products has been that the brass is really consistent, rifle and pistol.

One thing to note: keep your eyes on their inventory.  They run batches of calibers, so some of their less-common calibers may or may not be in stock when you want them.

Like dryflash3, I’ve always found prices direct from Starline to be better than from resellers.  I only go with resellers when I have ignored my own advice above and suddenly need a cartridge they don’t have in stock at the factory.
View Quote View All Quotes
View All Quotes
Quote History
Originally Posted By GHPorter:
Originally Posted By ZA206:
How good is Starline rifle brass? What's it equivalent to?

I've never used it.

It’s not Lapua brass, but it’s typically really good brass.

My experience with their products has been that the brass is really consistent, rifle and pistol.

One thing to note: keep your eyes on their inventory.  They run batches of calibers, so some of their less-common calibers may or may not be in stock when you want them.

Like dryflash3, I’ve always found prices direct from Starline to be better than from resellers.  I only go with resellers when I have ignored my own advice above and suddenly need a cartridge they don’t have in stock at the factory.



The downside sometimes is the batch size direct iirc are bigger when you buy direct and Midway batches are half the size.  So it depends how much brass you want as to whether it makes sense to buy one place or the other.

I buy .38-55, .38 special, .357, .32 S&W Long, .32 H&R  and .44-40 Starline brass.  I don’t recall a single defect that was objectionable.
9/8/2026 11:09:35 AM EDT
[Last Edit: M15A2CLE][Edited] [#12]
Starline to me is the best of the “regular” brass. It is not much better than Remington, Winchester, Hornady, IME. Lapua, Peterson and ADG are better, but only for when I’m getting nitpicky. That really only applies to precision ammo like PRS type or long range hunting.

They only run price discounts on higher volumes as far as I know. I’ve bought 1000 45-70 to get the price and sold off like 800 of them!

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

Armory Sponsor