Armory Sponsor
Posted: 6/4/2025 8:19:27 AM EDT
|
Thinking of adding Fire 4000 to the 6.5, and I would prefer to mount it topside versus on the 9 o clock of the handguard since I also need to have a light for this particular rifle, and thats the only place it will go given I can't run a tape switch with the light I am using. I am sure there's a way to stuff the setup in a case, but I haven't quite figured out how to do it. Anyone here running a similar setup and can confirm how to set up a case for it? I can separate the upper and lower, but still want to confirm there's a way to do it without running out of room. |
|
Originally Posted By oldbrowndog: Any reason it cant live on a diving board over the optic? That’s the goal. I’d just love to find a case that will support that. Current case doesn’t have the height. It’s a Plano 52 all weather 2. I wouldn’t mind separating the upper and lower, but can’t visualize how that will fit either. |
|
Originally Posted By Marksman14: That’s the goal. I’d just love to find a case that will support that. Current case doesn’t have the height. It’s a Plano 52 all weather 2. I wouldn’t mind separating the upper and lower, but can’t visualize how that will fit either. Pelican almost certainly has something. I like the 1720, but the 1750, V800, 1755, 3100/3200/3300 Storm, and others would all work |
|
Attached File Building it yourself for exactly what you have is very satisfying...I like to use ShoGue (sp) for adhesive. |
|
Originally Posted By coldblue: https://www.ar15.com/media/mediaFiles/19411/Foam_Case_Construction_1_JPG-3559547.JPG Building it yourself for exactly what you have is very satisfying...I like to use ShoGue (sp) for adhesive. I will just have to order up the range finder and start taking some measurements! I'm on a bit of a time crunch though so I was hoping to press the easy button and hoping someone else had a known case that would work 
|
Armory Sponsor