Armory Sponsor
1st Official PCC Picture thread! (Page 3 of 31)
|
Toby Coppley,cncgunsparts.com built 7.62mm x 25mm SBR upper.
One range visit to sight in at 50 yds, at 100 yds off hand w/ iron sights and my old eyes/shaky hands, could keep all rounds center of mass on torso size area. Suppressor is YHM SS Phantom. 
|
|
Here's my fav! .357 Timberwolf Pump Carbine! (Along with my 92, XD 45, and M1 Carbine)
eta- and a couple Dillos that jump into my pics! 
|
"I am serious. And don't call me Shirley."
Tennessee Squire
Fan of all things LaRue. PACK Proud.
Dillo Collector - If you don't want one, I'll take it off your hands. Especially limited run ones. Let me know.
Tennessee Squire
Fan of all things LaRue. PACK Proud.
Dillo Collector - If you don't want one, I'll take it off your hands. Especially limited run ones. Let me know.
|
Originally Posted By 0uTkAsT:
Originally Posted By Moose:
A quick scan showed at least 5 others in the thread (mine included). Not a lot, but not "utter lack", either. How do you like the new stock? Comparatively speaking, there aren't many at all in here, especially considering they're the most affordable of the lot. I just figured they'd be more predominant. The TS stock is great... Much more comfortable than the original. I love my 995, it's a hoot. I shoot it more than most of my high end guns combined. Originally Posted By odiedodi:
Gun snobs here like to write Hi-points off as garbage ghetto guns. I've never shot one myself, but I've heard much more good about them than bad. Exactly, most people hear the name and see the price tag and stick their nose up. They're great guns, you just have to remove your head out of your ass and pull the trigger on one to see the value in them. I've got over 1,200 rounds through mine and I've had exactly 3 FTF/FTEs and all three times were from the same lot of Russian steel-cased ammo so it had nothing to do with the gun. I have $1,000+ guns that don't have the same track record as this $200 Hi-Point. I had about 5,000 rounds, with about a dozen FTFs, through my 4095 before I sold it. While mine worked, it had a few things I didn't like about it. When I went from the rear sight to the scope base, I found that the factory had cross-threaded a screw in there. Thankfully, my brother had the tools to re-thread it. Hi-Point sprayed some sort of finish onto the interior parts, including the feed ramp. That finish started flaking off, and it would catch hollow-points and cause misfeeds. A little time with the dremel removed the rest of the finish and restored it to good function. The trigger was awful, but it's a $200 gun. When people ask me my opinion of Hi-Points, I tell them mine worked well enough to feel the $200 was well spent, but wished I'd been able to spend more. Basically, since buying that gun, I'd gotten over my interest in cheap guns and wanted to upgrade. Bought a Beretta CX4 in .40 S&W and haven't regretted it yet. 
Puma 92 .454 Casull H&R Handirifle .44 Magnum (Optic is temporary, had it sitting around) Marlin 1894FG .41 Magnum Beretta CX4 Storm .40 S&W 
Ruger PC9 9mm Luger Marlin 1894C .357 Magnum Olympic Arms 10mm Auto Upper (Optic is temporary, had it sitting around) Olympic Arms .45 ACP Upper (Optic is temporary, had it sitting around) |
Did you forget to strap your balls on this morning
Joined:
Apr 2009
Posts:
1786
EE: 100% (150)
USA
|
Finally decided to get myself a CX4 in 9mm.
Thinking of switching to 92 mags for a future pistol purchase. 
|
"If you are free to be a liberal, thank a man with a gun."
"Roughly 12 dollars. Don't "ACR" me if the price comes out a little higher!!!!!!" - CProductsChad
كافر
"Roughly 12 dollars. Don't "ACR" me if the price comes out a little higher!!!!!!" - CProductsChad
كافر
My name is viper5243, and i have a tok addiction.
Joined:
Apr 2007
Posts:
4693
EE: 100% (119)
AK, USA
|
How about my CX4 which now has a VLTOR stock :)
Here's my inspiration. 
I knew after someone else doing it that I could with a little planning. I couldn't find out who did it to pick their brain so I strapped on my c.o.jones and cut the stock off. 
I filled in the back of the lower assembly with epoxy to make a place to drill out for the stock tube. It's a milspec 6pos BTW from palmetto. VLTOR modstock from BCM for $50. Filling it with epoxy allowed it to harden quickly while making an extremely strong place to mount a stock tube. After drilling it out with a spade bit I checked the fit and it was tight enough to hold but not too tight that it was impossible to install the tube into. The threads actually grabbed to the epoxy/polymer and it did sort of thread in so that was good. I mixed more epoxy and installed it as far as it would go. I think I drilled between 5/8" and 3/4" into the CX4's lower assembly so the epoxy has plenty of surface to grab to the receiver extension. 
I then sprayed the VLTOR stock in tan, applied pine branches over it with earth brown, black, and forest green. Voila. 
After the paint dried in the sun––-about 30mins––-put her together. 
Range report soon. I think it needs a pad on the end––-not a fan of the cheese grater on the end as my other ARs have SOPMOD stocks...but this was 1/4 the price so I decided it's worth it. Comments welcome! |
 very nice!
|
 Marlin 1895 Guide Gun, .45-70 Government Winchester 1894 Ranger, .30 WCF Marlin 1894 CSS, .357 Magnum (my only pistol caliber carbine) Henry Model H001 Rifle, .22LR/L/S  My SBR PS90. I don't consider it a PCC since the 5.7x28mm was designed for it first then the Five Seven came out after it. Much like the .30 Carbine. The rifle was first then the pistols for it came out. |
“A man ought to do what he thinks is right” - John Wayne
"A democracy is nothing more than mob rule, where fifty-one percent of the people may take away the rights of the other forty-nine." - Thomas Jefferson
"A democracy is nothing more than mob rule, where fifty-one percent of the people may take away the rights of the other forty-nine." - Thomas Jefferson
How a CX4 .45 should come from the factory. Has a sierra papa trigger and hammer to comply with the obsurdly stupid 922r bullshit. They do, however, offer a far superior trigger feel than stock. I cut, trimmed, sanded, and filled the stock. Then got another top rail and welded the two togather. Its a handy little gun. Might sell....or might thread barrel for my osprey45.
|
Place holder for my Ruger .44 magnum carbine.
|
"How come when people want to know the time they point to their wrist but when they want to know where the bathroom is they don't point to their crotch?"
Thanks to NOVS for my membership!
Thanks to NOVS for my membership!
|
Originally Posted By 85blazer:
Vector Uzi SBR http://i190.photobucket.com/albums/z83/jaxtraxx/uzi003.jpg This may have pushed me over the edge. I may have to order a Nodak receiver sometime soon. |
None of us is as dumb as all of us.
|
Originally Posted By LukeDuke:
Place holder for my Ruger .44 magnum carbine. http://i79.photobucket.com/albums/j149/lukeduke423/IMG_6939.jpg Does that Ruger .44 take standard 10/22 Stocks, or is the channel wider? |
|
Originally Posted By bigjunk1:
http://i845.photobucket.com/albums/ab11/bigjunk1/034.jpg Mac 10 micro What kind of mag is that? |
|
Originally Posted By jmkrick:
Originally Posted By bigjunk1:
http://i845.photobucket.com/albums/ab11/bigjunk1/034.jpg Mac 10 micro What kind of mag is that? Tapco A.K.A Crapco. |
義 | 勇 | 仁 | 礼 | 信 | 誉 | 忠| 愛
Do no Drama, know no Drama.
Do no Drama, know no Drama.
|
Originally Posted By I_Yeager_I:
Originally Posted By jmkrick:
Originally Posted By bigjunk1:
http://i845.photobucket.com/albums/ab11/bigjunk1/034.jpg Mac 10 micro What kind of mag is that? Tapco A.K.A Crapco. Thanks....I don't even have a Mac 10. I just thought the mag had a cool look to it. |
|
Originally Posted By jmkrick:
Originally Posted By I_Yeager_I:
Originally Posted By jmkrick:
Originally Posted By bigjunk1:
http://i845.photobucket.com/albums/ab11/bigjunk1/034.jpg Mac 10 micro What kind of mag is that? Tapco A.K.A Crapco. Thanks....I don't even have a Mac 10. I just thought the mag had a cool look to it. Supposedly they're good mags. I'd take grease gun mags if I had a Mac-10 before I'd take the TAPCO offering. YMMV |
義 | 勇 | 仁 | 礼 | 信 | 誉 | 忠| 愛
Do no Drama, know no Drama.
Do no Drama, know no Drama.
|
A horrible picture of our his-and-hers Kel-Tec Sub 2000's. Both are the G17 models, and have Streamlight TLR-1s attached to the forend. Not pictured are the matching his-and-hers G17's, also with TLR-1s.
They're kinda ugly, and definitely inexpensive, but I'd rather shoot these than anything else in my safe. Just a neat, fun, reliable little carbine! 
|
|
Originally Posted By I_Yeager_I:
Originally Posted By jmkrick:
Originally Posted By I_Yeager_I:
Originally Posted By jmkrick:
Originally Posted By bigjunk1:
http://i845.photobucket.com/albums/ab11/bigjunk1/034.jpg Mac 10 micro What kind of mag is that? Tapco A.K.A Crapco. Thanks....I don't even have a Mac 10. I just thought the mag had a cool look to it. Supposedly they're good mags. I'd take grease gun mags if I had a Mac-10 before I'd take the TAPCO offering. YMMV I know Tapco is like getting Great value products at Walmart to most people but these mags have worked perfect so far. The Sten mags that this gun takes hold 32 rounds and the Tapco holds 36 rounds which I like and they are cool looking with a nice grip. Basically a p-mag for a mac. I will get more of them. |
Folded 
Kel Tec Sub2000 G17 model with stock extension Primary Arms Micro Red Dot in high quick release mount ( gives lower 1/3rd co witness with existing sights) Kel Tec spare mag holder G18 33rd mag cuz I panicked 
TLR-1 I had laying around 20$ red laser on the other side but it works to 25 yards cheap shorty VFG from the fun show |
Guns and Women, I love the smell of both.
But one gets you into trouble and the other gets you out.
But one gets you into trouble and the other gets you out.
|
Originally Posted By rjrivero:
9mm AR Carbine with Glock Mags. http://www.revolverforums.com/forum/picture.php?albumid=46&pictureid=266 SWR Trident 9 Test fitting: (the form 4's were sent Tuesday) http://www.revolverforums.com/forum/picture.php?albumid=46&pictureid=268 you know they make magpuls for glock mags? |
Prostitutes and Politicians are a lot alike, except when a hooker screws you and takes your money you feel good about it .
|
This is it for now, sub gun/carbine same thing... I'll post pictures of my 9mm AR when I finish it.  |
"Come York or come Hampshire, come traitors or knaves, if ye rule o'er our land ye shall rule o'er our graves; our vow is recorded–our banner unfurled, in the name of Vermont we defy all the world!" - The Song Of The Vermonters, 1779
This is the second, near perfect marlin camp 45 I have aquired this month. The first is getting an integral suppressor as I type. THis second rifle is flawless. Has the factory mag, and still has the factory stickers on it. Was sitting in the personal safe of a local gun shop owner that I just happend to ask if he had one. Made an offer, and now its going to sit in my safe while I play with the other. Sometimes you just gotta ask these guys.
|
|
Grandpa just gave me this the other day. It's a Remington 788 chambered in .44 mag. My google power must be weak lately because I can't find the original barrel length. This one appears to be cut down to 16" and fully floated. The stock has some half-ass bubba texture job on the for-end. Someone (not grandpa) ruined a potential collector, but it sure is fun and accurate.
Tell me more about this thing please 
Thanks |
|
Originally Posted By EB_311:
Grandpa just gave me this the other day. It's a Remington 788 chambered in .44 mag. My google power must be weak lately because I can't find the original barrel length. This one appears to be cut down to 16" and fully floated. The stock has some half-ass bubba texture job on the for-end. Someone (not grandpa) ruined a potential collector, but it sure is fun and accurate. Tell me more about this thing please http://i431.photobucket.com/albums/qq31/eb_311/downsized_0523110956a.jpg?t=1306247240 Thanks I dont know anything about it, but it is practically begging for a suppressor... |
1st Official PCC Picture thread! (Page 3 of 31)
Armory Sponsor