Armory Sponsor
|
Quoted:
Figured some of yall might be interested in this https://i.imgur.com/RL9UMgD.png https://i.imgur.com/ylZsSUo.png https://i.imgur.com/9BN2ugb.png |
|
Quoted: Huh... With my long forearm - and the overall short stock wire length - it could actually be used as intended - as a brace on a forearm. I rented a Vz61 at a MG shoot and found the stock extremely short as a stock - as a brace it might actually work very well as a brace (oddly enough) and retain some of the stock-factory look -I say Kudos to the OP of the brace! |
|
Mags on closeout at Numrich again.
$15, and free shipping over $75 https://www.gunpartscorp.com/products/1291430 https://www.gunpartscorp.com/products/1291430 |
so, my barrel is threaded 7/16-28. think morgan tried to make me a 7/16-28 to 1/2-28 adapter last summer and it just wasted a buncha time for him   sorry dont be mad at me! kimber makes a 7/16-5/8-4 setup, but its like 50+ and thats just too high to be not really what i need... what would be cool if we could get fixed rear end caps in 7/16-28.... i think thats treading into no mans land though....
i need a lower, anyone have a lead on a "cheap one" i like the guy at recon, hes fun to talk to, but his prices are bit high for me at the moment |
|
Quoted:
so, my barrel is threaded 7/16-28. think morgan tried to make me a 7/16-28 to 1/2-28 adapter last summer and it just wasted a buncha time for him sorry dont be mad at me! kimber makes a 7/16-5/8-4 setup, but its like 50+ and thats just too high to be not really what i need... what would be cool if we could get fixed rear end caps in 7/16-28.... i think thats treading into no mans land though....
i need a lower, anyone have a lead on a "cheap one" i like the guy at recon, hes fun to talk to, but his prices are bit high for me at the moment 
|
|
Quoted:
I would probably just buy the new 1x2/28 barrel setup from Czechpoint. Any reason for not doing so? You could have your suppressor on there in a few weeks. as far as buyikn more parts, my upper has a cool sn ends in x007, so i would like to keep that as is.... i prob will just buy a whole gun and call it good... |
Ordered some cheap parts off Amazon, looks like with a little modification this will work as a way to mount a red dot on this little plinker. Going to need to trim a bit off both sides of the barrel mount for clearance and a bit off the lips of the riser but, provided it holds zero, will work great
The riser is perfectly see through as a bonus 
You could probably get better results from a riser like so: 
But I'm not sure what kind of RDS I'm going to stick on it yet (plus the pictured by PA is only ~$30, the one I'm using as a proof-of-concept was only ~$9) |
|
Got my VZ back from the smith after having the adapter installed. Love it! It balances so much better. My smith had to try it out and was able to hit gongs with ease on the test range at 125 yards! He is now searching for one himself.
Attached File Just ordered a case of ammo from SGA. Now trying to find a case for it and eight mags. |
| I bought a Mostly complete (No barrel) upper at knob creek and a bag of small parts, however I'm not sure what other parts i need to make a complete gun, The obvious parts are well, easy to tell, i have a couple spare triggers and hammers, but theres small parts too i cant identify, is there a chart somewhere i can look at? |
|
Quoted:
I would really like to get a good set of prints for the Vz61. I want to model it up then build a FrankenBastard. Think - using a 380acp bolt... Modified mag well... I think this thing would be my favorite toy in 22TCM  |
| Finally got to shoot some steel with my sbr yesterday. Man this little gun rocks. No recoil and I was getting hits so easy with that little stock felt like cheating. Didn’t have time to try the threaded upper or .22 upper yet. Can’t remember last gun that was this fun to shoot. I might have to pick up another to sbr. |
|
Quoted:
I would really like to get a good set of prints for the Vz61. I want to model it up then build a FrankenBastard. Think - using a 380acp bolt... Modified mag well... I think this thing would be my favorite toy in 22TCM About the Canadians..... I had a B&T MP9 fixed stock special ordered from Thun to Wolverine Supplies. Some BS law about "machine gun parts" not being sold keeps me from getting that stock. Homeboy from Wolverine was all pissed off I didn't get him payment before. Idiots. |
|
I have a VZ-61 and the stock adapter for an AR style pistol brace.
I tried it out yesterday, and it was a blast to shoot. Now I want to put a folding style buffer tube on it, so that it's not so long during transport. What adapter would people recommend? I don't need a fancy one that you'd use on an AR, as of course there's no buffer or spring to deal with. I just basicaully need a threaded hinge. http://www.usmachinegun.com/proddetail.php?prod=SF-ARAD This one fits that description - however it's listed as Light duty only, for pistol buffer tube mount only, not for use with arm braces, stabilizer blades or rear stocks.. It's made out of aluminum so I'd guess it would be OK for range duty - I'll have to avoid buttstroking someone with it I guess but otherwise I'm tempted to give it a try, unless other's have and say it's junk. http://www.usmachinegun.com/proddetail.php?prod=UPRD-ARCP This one is listed for heavy duty, but has a flat plate on the end, needing another adapter to connect to the buffer tube. It comes with that adapter, but is starting to make the stock longer that what I'd like. Tips and recommendation on what to get? Thanks, |
|
The first you linked is trash (I had it and broke it). The best option is the Hera. Plus the USMG folders are really big and bulky The factory folder + adapter like above is great if you aren't worried about using a suppressor |
|
Quoted:
I bought a Mostly complete (No barrel) upper at knob creek and a bag of small parts, however I'm not sure what other parts i need to make a complete gun, The obvious parts are well, easy to tell, i have a couple spare triggers and hammers, but theres small parts too i cant identify, is there a chart somewhere i can look at? https://youtu.be/ZGNaglOQ1b8 Edit: also, if you can take a few clear photos of everything I can probably tell you if something is missing. I've stripped mine completely way too many times. |
Well it's fuggly but viola, red dot on a VZ.61
It definitely sits a bit higher than I like but not sure where I can get a lower riser that'd fit. The barrel clamp needs a bit more filing on it and to get hit with some alumablack but for $100 including the red dot I'm not going to complain, especially considering how decent this little dot is (nicest sub $100 I've seen). Will let y'all know if this monstrosity holds zero |
|
Quoted: There is a series on YouTube that should be able to help. Vz61 assembly, in three parts. Other than that, I can take a photo of all the parts laid out in their respective groups, but I'll need a few days. https://youtu.be/ZGNaglOQ1b8 Edit: also, if you can take a few clear photos of everything I can probably tell you if something is missing. I've stripped mine completely way too many times. Attached File |
just kinda zeroed on my small steel targets so nothing on paper yet but looking good so far! Definitely gonna find a way to get it a bit lower tho
|
Quoted:
Figured some of yall might be interested in this https://i.imgur.com/RL9UMgD.png https://i.imgur.com/ylZsSUo.png https://i.imgur.com/9BN2ugb.png |
|
I want a threaded barrel version in 32acp. Czech point has been out of stock for a while. What are my options to get one? Buy a standard version and have the barrel threaded? Saw some guy selling some on GunBroker, not sure if his builds are good. Maybe just hold out for the right one is better. |
|
Quoted:
I want a threaded barrel version in 32acp. Czech point has been out of stock for a while. What are my options to get one? Buy a standard version and have the barrel threaded? Saw some guy selling some on GunBroker, not sure if his builds are good. Maybe just hold out for the right one is better. |
|
Had this one in Baghdad back in 08'. It had seen better days.
Attached File Attached File Attached File Attached File Attached File CD |
|
I don't know how much you love your vz61, but...
Look into the cost (as in, have your dealer inquire) of the Scheyer suppressor. I'm strongly considering selling my threaded upper and bolt to get one. It's maybe 1.75x the cost, but it looks correct and you use the barrel you already own. |
|
Quoted:
I don't know how much you love your vz61, but... Look into the cost (as in, have your dealer inquire) of the Scheyer suppressor. I'm strongly considering selling my threaded upper and bolt to get one. It's maybe 1.75x the cost, but it looks correct and you use the barrel you already own. |
|
Quoted: Pictures? I would be interested in getting a suppressor that will work with the original barrel. |
| Oh WOW, gotta get me one. Will call my local Class III dealer tomorrow to see if he can get them. |
Armory Sponsor