AR Sponsor
Triggered [Formerly Partisan] Talk (Page 1 of 40)
Member
Joined:
Aug 2025
Posts:
51
EE: 0% (0)
TX, USA
Posted: 12/15/2025 9:39:43 AM EDT
[Last Edit: dredeagle][Edited]
|
They're in the wild. Placed order at Battlehawk Armory. @jaqufrost released a review. Ready .. set ... talk. |
|
Ordered from Battlehawk Order #514xxx Let's see how long they take. It's a fucky website Someone with a machine shop, please spin up some not fucked up looking selectors for this. |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
Joined:
Jun 2025
Posts:
1176
EE: 100% (57)
UT, USA
|
Originally Posted By Bye_Felicia: Ordered from Battlehawk Order #514xxx Let's see how long they take. It's a fucky website Someone with a machine shop, please spin up some not fucked up looking selectors for this. I am hoping they come out with a different selector later on, however I am more concerned if they are going to run in a Geissele lower. I was in to much of a rush to take a look at the stripped lowers to see about the M16 shelf 
|
|
Originally Posted By Justinandfreyja: I am hoping they come out with a different selector later on, however I am more concerned if they are going to run in a Geissele lower. I was in to much of a rush to take a look at the stripped lowers to see about the M16 shelf Attached File It's similar to staking a castle nut. |
|
Side view. Attached File Installed in a AR15 cut lower. Attached File |
|
Originally Posted By Bye_Felicia: Ordered from Battlehawk Order #514xxx Let's see how long they take. It's a fucky website Someone with a machine shop, please spin up some not fucked up looking selectors for this. A better selector and anti-walk pins are listed on the parts and accessories page as future releases. |
|
Originally Posted By heavyduty: I'm wondering if a RB modified ambi selector will work with this? I haven't been following the Partisan FRT but did see a pic (in GD, maybe?) that implies this. |
|
Cloak Industries also has them for sale. https://cloak-industries.com/product/partisan-disruptor-frt/ |
Joined:
Jun 2025
Posts:
1189
EE: 100% (57)
UT, USA
|
Originally Posted By jaqufrost: Here is my fix for M16 lowers. Takes 30 seconds with a punch. Obviously it's not recommended or tested by Partisan, but it's pretty basic. https://www.ar15.com/media/mediaFiles/57761/1000022309_jpg-3675774.JPG It's similar to staking a castle nut. @jaqufrost you are an absolute wealth of knowledge sir, and thank you for taking the time to explain that. This is my first FRT so I am fairly ignorant when it comes to the exact mechanics. You sir are a bad influence!
|
| Ordered! Thank you Jaqufrost for the video and info! I have a couple of M16 selectors already cut that I will use for the Partisan. I don’t even know which rifle I will use this in but will pick one out of my vault that isn’t already setup with one. |
NRA Life Member
I can see where you're coming from, 'cause I know where you've been and I can see where you're going 'cause I can see the direction you're headed in. I just don't know where the hell you're at right now.
I can see where you're coming from, 'cause I know where you've been and I can see where you're going 'cause I can see the direction you're headed in. I just don't know where the hell you're at right now.
|
Originally Posted By jaqufrost: Never hurts to purchase a few more... Originally Posted By jaqufrost: Originally Posted By viator: Thanks. Got it. Looks like I don't need to buy any more stripped lowers.  But, is that a good thing or a bad thing? I’ve got a small stack I have not built out yet, and already had Geissele triggers for several of them, then I started collecting FRT’s and may have more triggers now than lowers. And if not the LAT will probably take me past that. I know I should spend more on training and ammo than more guns, but being a college student when the 94 ban went in affect and never really thought about ARs till then definitely effected the way I view firearms priorities. |
I carry, because I cherish life.
Team Ranstad
Team Ranstad
|
Originally Posted By constitutionlvr: I’ve got a small stack I have not built out yet, and already had Geissele triggers for several of them, then I started collecting FRT’s and may have more triggers now than lowers. And if not the LAT will probably take me past that. I know I should spend more on training and ammo than more guns, but being a college student when the 94 ban went in affect and never really thought about ARs till then definitely effected the way I view firearms priorities. I think I missed something. What's the LAT? |
|
Originally Posted By MHIDPA: I think I missed something. What's the LAT? Originally Posted By MHIDPA: Originally Posted By constitutionlvr: I’ve got a small stack I have not built out yet, and already had Geissele triggers for several of them, then I started collecting FRT’s and may have more triggers now than lowers. And if not the LAT will probably take me past that. I know I should spend more on training and ammo than more guns, but being a college student when the 94 ban went in affect and never really thought about ARs till then definitely effected the way I view firearms priorities. I think I missed something. What's the LAT? A "Coming Soon" product https://partisantriggers.com/the-lat/ Attached File |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
Member
Joined:
Dec 2023
Posts:
6132
EE: 100% (7)
USA
|
Originally Posted By ELittlefield: Ordered from Battlehawk. I'm very excited for this one! Does anyone know why these companies design anything other than a mil spec type safety selector? This inverted V shape... why? Got me. Thankfully it appears that I can just modify an M16 spec trigger. |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
Member
Joined:
Dec 2023
Posts:
6133
EE: 100% (7)
USA
|
Originally Posted By Bye_Felicia: Got me. Thankfully it appears that I can just modify an M16 spec trigger. Originally Posted By Bye_Felicia: Originally Posted By ELittlefield: Ordered from Battlehawk. I'm very excited for this one! Does anyone know why these companies design anything other than a mil spec type safety selector? This inverted V shape... why? Got me. Thankfully it appears that I can just modify an M16 spec trigger. Yep, and I already have three selectors modified for Rare Breeds. I'll probably pick up another... Maybe that 60/120 degree one from Griffin? I've been meaning to give that a try. |
|
Originally Posted By Bye_Felicia: A "Coming Soon" product https://partisantriggers.com/the-lat/ https://www.ar15.com/media/mediaFiles/40084/609_png-3676121.JPG Originally Posted By Bye_Felicia: Originally Posted By MHIDPA: Originally Posted By constitutionlvr: I’ve got a small stack I have not built out yet, and already had Geissele triggers for several of them, then I started collecting FRT’s and may have more triggers now than lowers. And if not the LAT will probably take me past that. I know I should spend more on training and ammo than more guns, but being a college student when the 94 ban went in affect and never really thought about ARs till then definitely effected the way I view firearms priorities. I think I missed something. What's the LAT? A "Coming Soon" product https://partisantriggers.com/the-lat/ https://www.ar15.com/media/mediaFiles/40084/609_png-3676121.JPG It is already through design and prototyped. Expect it on the market quite soon. Like, maybe less time than the GD Partisan thread ran. |
Twitter/Instagram: benunsuppressed
https://americanpioneercorps.org
https://americanpioneercorps.org
|
Originally Posted By ELittlefield: Ordered from Battlehawk. I'm very excited for this one! Does anyone know why these companies design anything other than a mil spec type safety selector? This inverted V shape... why? Honestly, it is cheaper and easier to make. We wanted to keep the cost down. We already have a production run of M16 looking one piece selectors scheduled for later this month. |
Twitter/Instagram: benunsuppressed
https://americanpioneercorps.org
https://americanpioneercorps.org
Member
Joined:
Dec 2023
Posts:
6136
EE: 100% (7)
USA
|
Originally Posted By Ben: Honestly, it is cheaper and easier to make. We wanted to keep the cost down. We already have a production run of M16 looking one piece selectors scheduled for later this month. Originally Posted By Ben: Originally Posted By ELittlefield: Ordered from Battlehawk. I'm very excited for this one! Does anyone know why these companies design anything other than a mil spec type safety selector? This inverted V shape... why? Honestly, it is cheaper and easier to make. We wanted to keep the cost down. We already have a production run of M16 looking one piece selectors scheduled for later this month. Fair. Thanks for answering. Can you disclose whether you're contemplating a 3 round burst version? Your dealer account has been coy about that question a couple times, but perhaps now that the day has come? |
|
Originally Posted By ELittlefield: Fair. Thanks for answering. Can you disclose whether you're contemplating a 3 round burst version? Your dealer account has been coy about that question a couple times, but perhaps now that the day has come? I know the production team has talked about it, but this isn't a cottage industry company. I don't have a whole lot of say on what they are doing. I think a lot of folks are expecting Partisan Triggers is a few dudes cranking out triggers in a garage. It isn't. There is something like 100 people working on this. So that said, I know the idea has been talked about, but I believe the consensus has been "cool idea, we should, but let's push that farther back than the AK, AR22, CZ Scorpion, MP5, FAL, M249S, and Blunderbuss FRTs. Very few people in our market research wanted a 3 round burst. |
Twitter/Instagram: benunsuppressed
https://americanpioneercorps.org
https://americanpioneercorps.org
|
Originally Posted By ELittlefield: Ordered from Battlehawk. I'm very excited for this one! Does anyone know why these companies design anything other than a mil spec type safety selector? This inverted V shape... why? No clue. I'm not a stickler for clone correct but damn, that selector is one ugly MF'er. If I end up liking how these things function, I'll be getting a couple more Griffin 60/120 selectors and do the slight mod to fit them. Honestly, I'm not a huge fan of the griffin levers either but I do like the short throw, function over form. still, the griffin levers aren't partisan ugly
|
|
Originally Posted By Ben: It is already through design and prototyped. Expect it on the market quite soon. Like, maybe less time than the GD Partisan thread ran. Originally Posted By Ben: Originally Posted By Bye_Felicia: Originally Posted By MHIDPA: Originally Posted By constitutionlvr: I’ve got a small stack I have not built out yet, and already had Geissele triggers for several of them, then I started collecting FRT’s and may have more triggers now than lowers. And if not the LAT will probably take me past that. I know I should spend more on training and ammo than more guns, but being a college student when the 94 ban went in affect and never really thought about ARs till then definitely effected the way I view firearms priorities. I think I missed something. What's the LAT? A "Coming Soon" product https://partisantriggers.com/the-lat/ https://www.ar15.com/media/mediaFiles/40084/609_png-3676121.JPG It is already through design and prototyped. Expect it on the market quite soon. Like, maybe less time than the GD Partisan thread ran. Good to hear. |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
|
Originally Posted By Ben: I know the production team has talked about it, but this isn't a cottage industry company. I think a lot of folks are expecting Partisan Triggers is a few dudes cranking out triggers in a garage. It isn't. There is something like 100 people working on this. So that said, I know the idea has been talked about, but I believe the consensus has been "cool idea, we should, but let's push that farther back than the AK, AR22, CZ Scorpion, MP5, FAL, M249S, and Blunderbuss FRTs. Very few people in our market research wanted a 3 round burst. Originally Posted By Ben: Originally Posted By ELittlefield: Fair. Thanks for answering. Can you disclose whether you're contemplating a 3 round burst version? Your dealer account has been coy about that question a couple times, but perhaps now that the day has come? I know the production team has talked about it, but this isn't a cottage industry company. I think a lot of folks are expecting Partisan Triggers is a few dudes cranking out triggers in a garage. It isn't. There is something like 100 people working on this. So that said, I know the idea has been talked about, but I believe the consensus has been "cool idea, we should, but let's push that farther back than the AK, AR22, CZ Scorpion, MP5, FAL, M249S, and Blunderbuss FRTs. Very few people in our market research wanted a 3 round burst. It's really far down on my list. Cool, but down there. Mini14/30 would be nice as it has no current offerings. Higher on my list than "burst". |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
Member
Joined:
Dec 2023
Posts:
6139
EE: 100% (7)
USA
|
Originally Posted By Ben: I know the production team has talked about it, but this isn't a cottage industry company. I don't have a whole lot of say on what they are doing. I think a lot of folks are expecting Partisan Triggers is a few dudes cranking out triggers in a garage. It isn't. There is something like 100 people working on this. So that said, I know the idea has been talked about, but I believe the consensus has been "cool idea, we should, but let's push that farther back than the AK, AR22, CZ Scorpion, MP5, FAL, M249S, and Blunderbuss FRTs. Very few people in our market research wanted a 3 round burst. Originally Posted By Ben: Originally Posted By ELittlefield: Fair. Thanks for answering. Can you disclose whether you're contemplating a 3 round burst version? Your dealer account has been coy about that question a couple times, but perhaps now that the day has come? I know the production team has talked about it, but this isn't a cottage industry company. I don't have a whole lot of say on what they are doing. I think a lot of folks are expecting Partisan Triggers is a few dudes cranking out triggers in a garage. It isn't. There is something like 100 people working on this. So that said, I know the idea has been talked about, but I believe the consensus has been "cool idea, we should, but let's push that farther back than the AK, AR22, CZ Scorpion, MP5, FAL, M249S, and Blunderbuss FRTs. Very few people in our market research wanted a 3 round burst. That's fair. Thank you for answering. |
|
Originally Posted By Ben: It is already through design and prototyped. Expect it on the market quite soon. Like, maybe less time than the GD Partisan thread ran. Originally Posted By Ben: Originally Posted By Bye_Felicia: Originally Posted By MHIDPA: Originally Posted By constitutionlvr: I’ve got a small stack I have not built out yet, and already had Geissele triggers for several of them, then I started collecting FRT’s and may have more triggers now than lowers. And if not the LAT will probably take me past that. I know I should spend more on training and ammo than more guns, but being a college student when the 94 ban went in affect and never really thought about ARs till then definitely effected the way I view firearms priorities. I think I missed something. What's the LAT? A "Coming Soon" product https://partisantriggers.com/the-lat/ https://www.ar15.com/media/mediaFiles/40084/609_png-3676121.JPG It is already through design and prototyped. Expect it on the market quite soon. Like, maybe less time than the GD Partisan thread ran. That's great news. I plan to buy a few of those. |
Member
Joined:
Dec 2023
Posts:
6141
EE: 100% (7)
USA
|
Originally Posted By ELittlefield: To clarify, is Jaqufrost's review trigger the Disruptor, or the LAT? In the big thread, the dealer account was talking up the trigger quality... is this base model Disruptor a good, crisp single stage, and the LAT an even better one? Or is the LAT a 2 stage? The Disruptor is their base model and the LAT is supposed to be their "Match" version.  Partisan Forced Reset Trigger Review Also, Jaqufrost said he has multiple Partisans, so he'll have to answer the rest. |
Why is the sky blue?
What makes the green grass grow?
What makes the green grass grow?
|
Originally Posted By ELittlefield: To clarify, is Jaqufrost's review trigger the Disruptor, or the LAT? In the big thread, the dealer account was talking up the trigger quality... is this base model Disruptor a good, crisp single stage, and the LAT an even better one? Or is the LAT a 2 stage? Both are single stage. The Disruptor was actually meant to have a 4.5lbs CMP legal Service Rifle Match trigger pull, but it settles shortly after break in at somewhere around 4lbs. After a many thousand rounds we have had some go as low as settling at 3.7lbs. The Disruptor is a much better than milspec trigger pull. |
Twitter/Instagram: benunsuppressed
https://americanpioneercorps.org
https://americanpioneercorps.org
|
Originally Posted By ELittlefield: To clarify, is Jaqufrost's review trigger the Disruptor, or the LAT? In the big thread, the dealer account was talking up the trigger quality... is this base model Disruptor a good, crisp single stage, and the LAT an even better one? Or is the LAT a 2 stage? |
Member
Joined:
Jul 2025
Posts:
313
EE: 100% (73)
TN, USA
|
Originally Posted By jaqufrost on "It is time for an introduction. Edit: Nominate charities now!": Yes, I've modified a few. Obviously this isn't the OEM's recommendation, but I like them. Cut safety is on the bottom. https://www.ar15.com/media/mediaFiles/57761/1000022294_jpg-3675770.JPG Originally Posted By lugnutwrench2: How do you go about removing material? File or something else? I'm following up on this here because that other thread is a dumbster fire. I vaguely remember that someone here on ARFCOM provides a service to perform this modification. Is that true? If so, does anyone remember who does this? |
|
Originally Posted By lugnutwrench2: I'm following up on this here because that other thread is a dumbster fire. I vaguely remember that someone here on ARFCOM provides a service to perform this modification. Is that true? If so, does anyone remember who does this? |
Member
Joined:
Dec 2023
Posts:
6143
EE: 100% (7)
USA
|
Originally Posted By jaqufrost: He used to go by ssgtcarrol, but I forgot his new user name. Originally Posted By jaqufrost: Originally Posted By lugnutwrench2: I'm following up on this here because that other thread is a dumbster fire. I vaguely remember that someone here on ARFCOM provides a service to perform this modification. Is that true? If so, does anyone remember who does this? Gorton87 |
Member
Joined:
Dec 2023
Posts:
6144
EE: 100% (7)
USA
|
Originally Posted By ELittlefield: Well, I have a tracking number from Battlehawk. Order 5144xx. Same. Of course just label printed, see when it actually starts moving. Be awesome if I could have it this weekend before I go shoot. |
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
|
Originally Posted By lugnutwrench2: Originally Posted By lugnutwrench2: Originally Posted By jaqufrost on "It is time for an introduction. Edit: Nominate charities now!": Yes, I've modified a few. Obviously this isn't the OEM's recommendation, but I like them. Cut safety is on the bottom. https://www.ar15.com/media/mediaFiles/57761/1000022294_jpg-3675770.JPG Originally Posted By lugnutwrench2: How do you go about removing material? File or something else? That looks like a pretty straightforward mod - Dremel, clean it up with a file and some cold blue. |
|
@Ben I need one for 9mm AR 15 platform. Are you currently testing 9mm BCG's and buffer set-ups for the Partisan trigger ??? I can help if you need more beta, insight, R&D, and videos. I have pretty extensive experience in the Hoffman/GMR SS platform in alot of different 9mm AR PCC's..... Different set-ups for BCG's/buffers/triggers/magazine types, etc. I wanted to dive into the FRT's and do testing/write-up for the AR 9mm PCC folks. All information will be shared exclusively with Partisan. . |
Occid Vel Occisus Est !!
Member
Joined:
Dec 2023
Posts:
6157
EE: 100% (7)
USA
|
Originally Posted By heavyduty: Cloak still had 97 when I ordered yesterday morning - they didn’t go as fast as I expected. Originally Posted By heavyduty: Originally Posted By chuck1: You all just cost me money.  I ordered from Cloak and it was down to 6 left when I paid.  Cloak still had 97 when I ordered yesterday morning - they didn’t go as fast as I expected. I think they had about 94 when I looked. I decided to hold off on buying a second one. My ass was chapped about the extra 50 in taxes and shipping from Battlehawk though. 
|
|
Originally Posted By ELittlefield: I think they had about 94 when I looked. I decided to hold off on buying a second one. My ass was chapped about the extra 50 in taxes and shipping from Battlehawk though. Originally Posted By ELittlefield: Originally Posted By heavyduty: Originally Posted By chuck1: You all just cost me money. I ordered from Cloak and it was down to 6 left when I paid. Cloak still had 97 when I ordered yesterday morning - they didn’t go as fast as I expected. I think they had about 94 when I looked. I decided to hold off on buying a second one. My ass was chapped about the extra 50 in taxes and shipping from Battlehawk though. Ya Battlehawk was very 
|
"My friend, you would not tell with such high zest
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
To children ardent for some desperate glory,
The old Lie: Dulce et decorum est
Pro patria mori." -Wilfred Owen
Triggered [Formerly Partisan] Talk (Page 1 of 40)
AR Sponsor