AR Sponsor
Posted: 3/11/2026 3:51:47 PM EDT
| unsure where exactly to ask this but who makes the best steel target hanger for a T-Post? I bought several made by Champion and they all suck and most are broken now. I think their problem is they use too cheap of steel |
|
I've got a handful of these that I hang six and eight inch plates from on t-posts. X Steel Targets |
|
Originally Posted By xCLAYBUSTERx: https://hangfasttargets.com/ Near genius. Thanks. |
|
Originally Posted By JLR99: I've got a handful of these that I hang six and eight inch plates from on t-posts. X Steel Targets That "T" post won't last long. |
|
Originally Posted By xCLAYBUSTERx: https://hangfasttargets.com/ This Rick solid. I use them on all of my steel targets |
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM
SI VIS PACEM PARA BELLUM
Junk Fu solution:  Shallow uni-strut scraps with the bolts, nuts, washers, spacers, etc of you choice. Strut sections should be 4" or 5" at least or heavier calibers will make them jump off the t-post. Squeeze the strut a little in a vise to bend the center and they will fit over the teeth on the face of the T-post |
|
Krate tactical makes a good simple durable design. Takes a lot of direct hits to kill them. I have like 15 of them. Don’t think I’ve totally killed one yet. Bee a couple years of using them https://kratetactical.com/shop/t-post-elephants/?srsltid=AfmBOoppCC7m1GmP_4cCbhvvtNvhLeiGbhZ94KamdnDFckYEwY8h3_O9 |
|
Originally Posted By xCLAYBUSTERx: https://hangfasttargets.com/ I like it but in my experience the nut on the bolt always loosens itself from vibration and also requires tools unless you just hand tighten the nut. |
|
Originally Posted By runguns: I like it but in my experience the nut on the bolt always loosens itself from vibration and also requires tools unless you just hand tighten the nut. Use a lock nut like your supposed to and it won't come undone, mine have been up for 8 years. |
|
Originally Posted By xCLAYBUSTERx: Use a lock nut like your supposed to and it won't come undone, mine have been up for 8 years. Tried those and they loosen themselves too. With the volume of fire my targets see, I moved away from nut & bolt designs. They stay up 24/7 on private land and get shot almost daily. T post target hanger "hooks" usually last a few months, just getting tired of replacing. I realize not shooting the hanger hook adds to the longevity, but I don't control who uses the range on a daily basis |
|
Originally Posted By Mindless: That "T" post won't last long. Originally Posted By Mindless: Originally Posted By JLR99: I've got a handful of these that I hang six and eight inch plates from on t-posts. X Steel Targets That "T" post won't last long. Eh. I haven't had to throw away a t-post yet. |
|
I like these, but got them when they were cheaper. They are finicky about the top of the T post not being bent up. Also, I think it shipped with metric fasteners. I just assumed they were going to be SAE. Had to order some as the hardware store does not stock those. The junk fu C channel idea is great!  
Attached File |
AR Sponsor