Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
7/5/2026 2:49:09 PM EDT
[Last Edit: win][Edited]
I was watching a buddy install a super safety.

The middle position works as a safety.    This is not how it should be.
If the safety is rotated where the lever is forward or by the hammer it will fire.  But if the safety is rotated where the lever is to the rear it won’t fire.
The safety position works as it should.  The fire position works as it should.  Or safety all the way to the left.  Just the middle position does not work.
Any ideas?  
Thanks
7/5/2026 3:02:44 PM EDT
[#1]
We’re going to need a translator to understand WTF you are trying to explain.

Safe works?
Middle position works?
Far right position?
7/5/2026 3:17:01 PM EDT
[#2]
Middle post does not work
7/5/2026 3:48:38 PM EDT
[#3]
It wasn’t installed correctly if all positions don’t work. Pull it out and start over.
7/5/2026 4:01:40 PM EDT
[Last Edit: D_Man][Edited] [#4]
Originally Posted By win:

If the safety is rotated where the lever is forward or by the hammer it will fire.  But if the safety is rotated where the lever is to the rear it won't fire.
The safety position works as it should.  The fire position works as it should.
View Quote
If you're just doing this test with no upper and moving the lever by hand, then it's working 100% as it should be.

Moving the lever back forces the trigger to stay forward, effectively putting it on safe, that's where the tongue in cheek name "super safe" comes from.

You need to test it with and upper and cycle the charging handle while holding the trigger down.  In the middle position you'll feel the trigger get forced forward as you pull the bolt back, then when you let it go forward while still putting pressure on the trigger it should fire just as the bolt returns in battery.
7/5/2026 4:48:59 PM EDT
[#5]
I have tried with the upper on.  I don’t feel the push forward.
7/5/2026 5:01:52 PM EDT
[Last Edit: D_Man][Edited] [#6]
Quote History
Originally Posted By win:
I have tried with the upper on.  I don't feel the push forward.
View Quote
Okay so with it assembled and in the middle position, you pull the trigger, hold it back, cycle the bolt all the way back and all the way forward, and then what happens as you let off the trigger?

Is there a dead trigger because the hammer is forward?

Is the hammer caught on the disconnector And you hear the hammer drop into the sear just like it does in semi auto?

Is the trigger stiff as if it were now on safe and the hammer is cocked?

Or does the BCG bind up somewhere or anything else you can describe happening?
7/5/2026 5:39:43 PM EDT
[#7]
The trigger feels like it’s on safe.  Does not move.
I hope I can explain this is.
So charge the rifle and it won’t fire in the middle position.  Looking at the right side of the rifle I can turn the safety clockwise then it will fire.  When I cycle the rifle the safety rotates counterclockwise.  The rifle won’t fire.  If I rotate the safety clockwise it will fire.
I have watched a video where I can see the safety rotating as the rifle fires.  So I think  this is my problem.
7/5/2026 6:49:11 PM EDT
[#8]
It sounds like the SS arm is going back on the rear bolt stroke, but not forward on the forward bolt stroke.

Would you by chance have a semi auto spec carrier?  Those don't have the ledge needed to push the arm forward.

7/5/2026 7:06:40 PM EDT
[Last Edit: win][Edited] [#9]
Yes yes.
I swapped one of my BCG in and now it will work.  He had a semi bolt carrier.

Thanks for the help
7/5/2026 7:30:09 PM EDT
[#10]
Good deal.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

AR Sponsor