Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
7/19/2026 4:59:30 PM EDT
[Last Edit: yosarain22777][Edited]
Shot 100 rounds of pmc .223 . I had 3 light primer strikes while shooting  . The malfunctions happened while shooting short burst . The lower has a standard rifle buffer.  The rifle was extremely hot by the 3rd mag . I'm not sure what would have caused the issues .
7/19/2026 5:36:01 PM EDT
[#1]
Pull your BCG apart and clean around your firing pin. Look at things under a magnifying glass

I have older eyeballs. The magnifier finds things.
Preferred pronoun: MARINE
7/19/2026 5:37:55 PM EDT
[Last Edit: wildearp][Edited] [#2]
Non-milspec hammer springs are the only thing that have caused intermittent light primer strikes for me.

Make sure things are wet. Not full return to battery might cause this too
Preferred pronoun: MARINE
7/20/2026 10:30:20 AM EDT
[#3]
I will give the rifle a good cleaning . Hammer springs are cheap so I will grab a few . The lower was assembled by PSA so I would assume it is milspec . Rifle has maybe 1100 round on it . I was using pmags .
7/20/2026 11:17:02 AM EDT
[#4]
My guess is a timing issue. I would grind the back of the kicker .010 to delay the timing slightly.
8/3/2026 11:00:39 AM EDT
[#5]
Update , swapped out the stock hammer with a schmid hammer  . The rifle functioned perfectly .

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

AR Sponsor