User Panel
User Panel
User Panel
|
Posted: 10/22/2016 5:01:39 PM EDT
[#1]
older picture of mine...
and a question, has anyone used one of Ace ultra lite gusset's and possibly a thin lock ring (link below) https://jtdistributing.com/store/a146.html and https://jtdistributing.com/store/a618.html on their gen 4 stock instead of the castle nut/end plate? |
|
|
|
|
Posted: 10/22/2016 5:12:32 PM EDT
[Last Edit: Engineer5]
[#2]
Quote HistoryOriginally Posted By KOBK:
older picture of mine... <a href="http://s196.photobucket.com/user/nashvillito/media/holland01_zps39mtn1lq.jpg.html" target="_blank">http://i196.photobucket.com/albums/aa253/nashvillito/holland01_zps39mtn1lq.jpg</a> and a question, has anyone used one of Ace ultra lite gusset's and possibly a thin lock ring (link below) https://jtdistributing.com/store/a146.html and https://jtdistributing.com/store/a618.html on their gen 4 stock instead of the castle nut/end plate? I emailed them several months ago about getting a gusset for my gen 4. They wanted to know what gen. I didn't know so they asked for a picture of the stock and after I emailed them a pic I was told a gusset wouldn't work and I needed to use a castle nut. No explanation was given. I don't see why it wouldn't work. Hopefully someone will respond that has done this. Might just have to order one anyway. ETA: Could someone please post up some up close pics of a gusset. |
|
|
|
|
Posted: 10/22/2016 5:22:51 PM EDT
[Last Edit: HaveBlue83]
[#3]
Quote HistoryOriginally Posted By Engineer5: I emailed them several months ago about getting a gusset for my gen 4. They wanted to know what gen. I didn't know so they asked for a picture of the stock and after I emailed them a pic I was told a gusset wouldn't work and I needed to use a castle nut. No explanation was given. I don't see why it wouldn't work. Hopefully someone will respond that has done this. Might just have to order one anyway. ETA: Could someone please post up some up close pics of a gusset. Quote HistoryOriginally Posted By Engineer5: Originally Posted By KOBK: older picture of mine... <a href="http://s196.photobucket.com/user/nashvillito/media/holland01_zps39mtn1lq.jpg.html" target="_blank">http://i196.photobucket.com/albums/aa253/nashvillito/holland01_zps39mtn1lq.jpg</a> and a question, has anyone used one of Ace ultra lite gusset's and possibly a thin lock ring (link below) https://jtdistributing.com/store/a146.html and https://jtdistributing.com/store/a618.html on their gen 4 stock instead of the castle nut/end plate? I emailed them several months ago about getting a gusset for my gen 4. They wanted to know what gen. I didn't know so they asked for a picture of the stock and after I emailed them a pic I was told a gusset wouldn't work and I needed to use a castle nut. No explanation was given. I don't see why it wouldn't work. Hopefully someone will respond that has done this. Might just have to order one anyway. ETA: Could someone please post up some up close pics of a gusset. the gen 4 tube doesnt have the required =/= 1deg ish angle needed to accept the gusset. i had to cut this in when i made the rifle tube into the carbine tube. i bet i could mod a gen 4 tube to a gen 1 style gusset. |
|
|
|
TX, USA
|
Posted: 10/22/2016 8:57:12 PM EDT
[#4]
Quote HistoryOriginally Posted By HaveBlue83:
the gen 4 tube doesnt have the required =/= 1deg ish angle needed to accept the gusset. i had to cut this in when i made the rifle tube into the carbine tube. i bet i could mod a gen 4 tube to a gen 1 style gusset. <a href="http://postimage.org/" target="_blank">http://s22.postimg.org/oie20xhmp/20160831_194309_1472859024439.jpg</a> image hosting 12mb <a href="http://postimage.org/" target="_blank">http://s17.postimg.org/u8q3188y7/20160831_200303_1472859066806.jpg</a> hosting image Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By Engineer5:
Originally Posted By KOBK:
older picture of mine... <a href="http://s196.photobucket.com/user/nashvillito/media/holland01_zps39mtn1lq.jpg.html" target="_blank">http://i196.photobucket.com/albums/aa253/nashvillito/holland01_zps39mtn1lq.jpg</a> and a question, has anyone used one of Ace ultra lite gusset's and possibly a thin lock ring (link below) https://jtdistributing.com/store/a146.html and https://jtdistributing.com/store/a618.html on their gen 4 stock instead of the castle nut/end plate? I emailed them several months ago about getting a gusset for my gen 4. They wanted to know what gen. I didn't know so they asked for a picture of the stock and after I emailed them a pic I was told a gusset wouldn't work and I needed to use a castle nut. No explanation was given. I don't see why it wouldn't work. Hopefully someone will respond that has done this. Might just have to order one anyway. ETA: Could someone please post up some up close pics of a gusset. the gen 4 tube doesnt have the required =/= 1deg ish angle needed to accept the gusset. i had to cut this in when i made the rifle tube into the carbine tube. i bet i could mod a gen 4 tube to a gen 1 style gusset. <a href="http://postimage.org/" target="_blank">http://s22.postimg.org/oie20xhmp/20160831_194309_1472859024439.jpg</a> image hosting 12mb <a href="http://postimage.org/" target="_blank">http://s17.postimg.org/u8q3188y7/20160831_200303_1472859066806.jpg</a> hosting image Looks familiar... |
|
|
|
Posted: 10/22/2016 9:03:28 PM EDT
[#5]
Quote HistoryOriginally Posted By 8NAK4: Looks familiar... Quote HistoryOriginally Posted By 8NAK4: Originally Posted By HaveBlue83: Originally Posted By Engineer5: Originally Posted By KOBK: older picture of mine... <a href="http://s196.photobucket.com/user/nashvillito/media/holland01_zps39mtn1lq.jpg.html" target="_blank">http://i196.photobucket.com/albums/aa253/nashvillito/holland01_zps39mtn1lq.jpg</a> and a question, has anyone used one of Ace ultra lite gusset's and possibly a thin lock ring (link below) https://jtdistributing.com/store/a146.html and https://jtdistributing.com/store/a618.html on their gen 4 stock instead of the castle nut/end plate? I emailed them several months ago about getting a gusset for my gen 4. They wanted to know what gen. I didn't know so they asked for a picture of the stock and after I emailed them a pic I was told a gusset wouldn't work and I needed to use a castle nut. No explanation was given. I don't see why it wouldn't work. Hopefully someone will respond that has done this. Might just have to order one anyway. ETA: Could someone please post up some up close pics of a gusset. the gen 4 tube doesnt have the required =/= 1deg ish angle needed to accept the gusset. i had to cut this in when i made the rifle tube into the carbine tube. i bet i could mod a gen 4 tube to a gen 1 style gusset. <a href="http://postimage.org/" target="_blank">http://s22.postimg.org/oie20xhmp/20160831_194309_1472859024439.jpg</a> image hosting 12mb <a href="http://postimage.org/" target="_blank">http://s17.postimg.org/u8q3188y7/20160831_200303_1472859066806.jpg</a> hosting image Looks familiar... 501st OPSEC. i swear dude.....if my shitty ass gen juan falls apart one day im gonna cry. this stock is the most badass legitness pos ever haha |
|
|
|
|
Posted: 10/22/2016 10:42:37 PM EDT
[#6]
Quote HistoryOriginally Posted By HaveBlue83:
the gen 4 tube doesnt have the required =/= 1deg ish angle needed to accept the gusset. i had to cut this in when i made the rifle tube into the carbine tube. i bet i could mod a gen 4 tube to a gen 1 style gusset. <a href="http://postimage.org/" target="_blank">http://s22.postimg.org/oie20xhmp/20160831_194309_1472859024439.jpg</a> image hosting 12mb <a href="http://postimage.org/" target="_blank">http://s17.postimg.org/u8q3188y7/20160831_200303_1472859066806.jpg</a> hosting image Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By Engineer5:
Originally Posted By KOBK:
older picture of mine... <a href="http://s196.photobucket.com/user/nashvillito/media/holland01_zps39mtn1lq.jpg.html" target="_blank">http://i196.photobucket.com/albums/aa253/nashvillito/holland01_zps39mtn1lq.jpg</a> and a question, has anyone used one of Ace ultra lite gusset's and possibly a thin lock ring (link below) https://jtdistributing.com/store/a146.html and https://jtdistributing.com/store/a618.html on their gen 4 stock instead of the castle nut/end plate? I emailed them several months ago about getting a gusset for my gen 4. They wanted to know what gen. I didn't know so they asked for a picture of the stock and after I emailed them a pic I was told a gusset wouldn't work and I needed to use a castle nut. No explanation was given. I don't see why it wouldn't work. Hopefully someone will respond that has done this. Might just have to order one anyway. ETA: Could someone please post up some up close pics of a gusset. the gen 4 tube doesnt have the required =/= 1deg ish angle needed to accept the gusset. i had to cut this in when i made the rifle tube into the carbine tube. i bet i could mod a gen 4 tube to a gen 1 style gusset. <a href="http://postimage.org/" target="_blank">http://s22.postimg.org/oie20xhmp/20160831_194309_1472859024439.jpg</a> image hosting 12mb <a href="http://postimage.org/" target="_blank">http://s17.postimg.org/u8q3188y7/20160831_200303_1472859066806.jpg</a> hosting image That's damn good work. |
|
|
|
|
Posted: 10/22/2016 11:59:44 PM EDT
[#7]
Nice work Haveblue. So is the carbine Ace at it's most extended length the same EXACT length as the rifle ACE shortest length? It says so on paper but just wondering if you or maybe Sam.Dog can post a pic of the two together to confirm.
|
|
|
|
|
Posted: 10/23/2016 12:03:48 AM EDT
[#8]
Quote HistoryOriginally Posted By prskiller: Nice work Haveblue. So is the carbine Ace at it's most extended length the same EXACT length as the rifle ACE shortest length? It says so on paper but just wondering if you or maybe Sam.Dog can post a pic of the two together to confirm. |
|
|
|
|
Posted: 10/23/2016 12:36:18 AM EDT
[#9]
Quote HistoryOriginally Posted By HaveBlue83:
iirc YES it is. if i put the carbine foam on the rifle tube it looked like an extended carbine. Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By prskiller:
Nice work Haveblue. So is the carbine Ace at it's most extended length the same EXACT length as the rifle ACE shortest length? It says so on paper but just wondering if you or maybe Sam.Dog can post a pic of the two together to confirm. Good to know. 9-1/2 is perfect length so I could just lock it with the screw if I got either one. |
|
|
|
|
Posted: 10/23/2016 10:17:05 PM EDT
[Last Edit: JarHead94]
[#10]
Quote HistoryOriginally Posted By Samson-Dogg:
All 4 mk12's,SAM-R,SDM-R,MK18,CQBR. All the uppers are done and i have all the stocks,grips and lower parts. my lowers ship back from braceman tomorrow. i sent him 13. ill need to finish out the 80% recievers and have them anodized before everything will be completely done. i expect the AEM5's any day. the m110 has been finished but the m110 can and my NT4 can god knows when ill see those. form 4's were not done until late june on those two.im doing an m110 in 5.56 clone that braceman cooked up something special for the lower. also working on a block 1 with a kac fsgb and carbine urx ii that i think will be pretty cool. by the way compass lake charges 25.00 to do the flats for the wheeled front sight.i sent them 3 uppers to do but all in seperate boxes. i got worried about something being lost in the mail and i would have a heart attack if i lost all those gas blocks and rails at the same time.ive always been impressed with CLE's work. they did my SDM-R barrel and it looked very good. i actually ended up with two SDM-R's just by chance.http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/image_zpspplfwivx.jpeg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/image_zpsmgkh6vly.jpeg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/image_zpsglfvifl5.jpeg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/IMG_2375_zpspuqhx3ct.jpg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/IMG_2374_zpskri6jlyd.jpg</a>" /> SDM-R's http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/IMG_2367_zps3sk3dyce.jpg</a>" /> Quote HistoryOriginally Posted By Samson-Dogg:
Originally Posted By prskiller:
Originally Posted By Samson-Dogg:
I'll never sell mine. You mean " I'll never sell mines" Don't you have a shit load being built?? All 4 mk12's,SAM-R,SDM-R,MK18,CQBR. All the uppers are done and i have all the stocks,grips and lower parts. my lowers ship back from braceman tomorrow. i sent him 13. ill need to finish out the 80% recievers and have them anodized before everything will be completely done. i expect the AEM5's any day. the m110 has been finished but the m110 can and my NT4 can god knows when ill see those. form 4's were not done until late june on those two.im doing an m110 in 5.56 clone that braceman cooked up something special for the lower. also working on a block 1 with a kac fsgb and carbine urx ii that i think will be pretty cool. by the way compass lake charges 25.00 to do the flats for the wheeled front sight.i sent them 3 uppers to do but all in seperate boxes. i got worried about something being lost in the mail and i would have a heart attack if i lost all those gas blocks and rails at the same time.ive always been impressed with CLE's work. they did my SDM-R barrel and it looked very good. i actually ended up with two SDM-R's just by chance.http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/image_zpspplfwivx.jpeg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/image_zpsmgkh6vly.jpeg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/image_zpsglfvifl5.jpeg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/IMG_2375_zpspuqhx3ct.jpg</a>" /> http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/IMG_2374_zpskri6jlyd.jpg</a>" /> SDM-R's http://<a href=http://i1374.photobucket.com/albums/ag406/Kseevers1127/Mobile%20Uploads/IMG_2367_zps3sk3dyce.jpg</a>" /> 
And I'm still working on just my SAM-R upper we were talking about over the summer! I did get the M4A1, USMC A4, and a retro-mod XM-177 done, though. I have the parts for the Mod H and SAM-R, but they aren't put together yet. Soon. Soon.... |
|
|
|
|
Posted: 10/25/2016 7:00:51 PM EDT
[#11]
 took a former marine friend out today. he hasnt had trigger time in over 2 years. i let him do his thing and i walked him out to 600yds. he made good hits and we had 1-1.5mils wind @600m so it made for some fun wind dopes. support the troops with guntherapy! |
|
|
|
USA
|
Posted: 10/26/2016 2:55:01 PM EDT
[#12]
|
|
|
WI, USA
|
Posted: 10/26/2016 4:29:28 PM EDT
[#13]
Quote HistoryOriginally Posted By HaveBlue83:
<a href="https://postimg.org/image/4loarbi8n/" target="_blank">https://s15.postimg.org/gnjolgrh7/20161025_163843.jpg</a> took a former marine friend out today. he hasnt had trigger time in over 2 years. i let him do his thing and i walked him out to 600yds. he made good hits and we had 1-1.5mils wind @600m so it made for some fun wind dopes. support the troops with guntherapy! Now that's how friends treat friends. |
|
|
|
Posted: 10/26/2016 5:41:52 PM EDT
[#14]
Quote HistoryOriginally Posted By Dobs013:
Gen 1 socom obtained! <a href="http://s230.photobucket.com/user/speedstar13/media/Mobile%20Uploads/IMG_0139.jpg.html" target="_blank">http://i230.photobucket.com/albums/ee270/speedstar13/Mobile%20Uploads/IMG_0139.jpg</a> Nice!!! |
|
|
|
TX, USA
|
Posted: 10/26/2016 7:51:18 PM EDT
[#15]
Quote HistoryOriginally Posted By Dobs013:
Gen 1 socom obtained! <a href="http://s230.photobucket.com/user/speedstar13/media/Mobile%20Uploads/IMG_0139.jpg.html" target="_blank">http://i230.photobucket.com/albums/ee270/speedstar13/Mobile%20Uploads/IMG_0139.jpg</a> Welcome to the cool kids' table 
|
|
|
|
Posted: 10/26/2016 7:57:30 PM EDT
[#16]
Quote HistoryOriginally Posted By Stukas87: Having been in the unit (5th SFG) when the SPR (MK12 came out.) The history overview on page 1 is correct I never heard of that set up being called the Holland. But I can understand the name. And Ace stocks were popular at the time because of the different lengths you could buy for your Post ban AR's. Now Steve was instrumental in the development SPR, it was really a 5th SFG initiative. He and a few other 5th SFG guys really developed it. Only reason it has a MK12 name (Navy) is our connection to Crane for all our small arms. SF side of the house its really a SPR Special Purpose Rifle I remember shooting 5 early prototypes he brought out to the range in circa 1999. Now It was very common to shit can the full length A2 butt stock put a collapsible on it. Good post, thanks Stukas. |
|
|
|
USA
|
Posted: 10/26/2016 8:52:52 PM EDT
[#17]
Quote HistoryOriginally Posted By Dobs013: Gen 1 socom obtained! http://i230.photobucket.com/albums/ee270/speedstar13/Mobile%20Uploads/IMG_0139.jpg |
|
|
TX, USA
|
Posted: 10/26/2016 10:23:08 PM EDT
[#18]
Quote HistoryOriginally Posted By CloneDiseased:
where!? Quote HistoryOriginally Posted By CloneDiseased:
Originally Posted By Dobs013:
Gen 1 socom obtained! http://i230.photobucket.com/albums/ee270/speedstar13/Mobile%20Uploads/IMG_0139.jpg I'm betting Mary at Doublestar Arms had something to do with it. |
|
|
FL, USA
|
Posted: 10/26/2016 10:29:25 PM EDT
[#19]
Quote HistoryOriginally Posted By 8NAK4:
I'm betting Mary at Doublestar Arms had something to do with it. Quote HistoryOriginally Posted By 8NAK4:
Originally Posted By CloneDiseased:
Originally Posted By Dobs013:
Gen 1 socom obtained! http://i230.photobucket.com/albums/ee270/speedstar13/Mobile%20Uploads/IMG_0139.jpg I'm betting Mary at Doublestar Arms had something to do with it. Go on.... |
|
|
|
Posted: 10/27/2016 12:09:59 AM EDT
[#20]
Type m4 socom in gunbroker, there is one gen 1 that ends Friday I believe. I was going to snatch it but since I won't, there it is. Rifle length though.
Posted Via AR15.Com Mobile |
|
|
|
FL, USA
|
Posted: 10/27/2016 12:21:17 AM EDT
[Last Edit: KGLaw]
[#21]
Quote HistoryOriginally Posted By prskiller:
Type m4 socom in gunbroker, there is one gen 1 that ends Friday I believe. I was going to snatch it but since I won't, there it is. Rifle length though. Posted Via AR15.Com Mobile Annnnd there went my hope for a lack of competition. 
ETA - Guess I should point out I'm neither serious, nor the current bidder having decided to wait for a carbine length. 
|
|
|
|
Posted: 10/27/2016 1:23:36 AM EDT
[#22]
Quote HistoryOriginally Posted By Hunterex:
Annnnd there went my hope for a lack of competition.
ETA - Guess I should point out I'm neither serious, nor the current bidder having decided to wait for a carbine length. Quote HistoryOriginally Posted By Hunterex:
Originally Posted By prskiller:
Type m4 socom in gunbroker, there is one gen 1 that ends Friday I believe. I was going to snatch it but since I won't, there it is. Rifle length though. Posted Via AR15.Com Mobile Annnnd there went my hope for a lack of competition.
ETA - Guess I should point out I'm neither serious, nor the current bidder having decided to wait for a carbine length. It was kinda hush hush after dobs posted his find a page back but I knew I wouldn't be the only one. |
|
|
|
|
Posted: 10/27/2016 3:21:13 AM EDT
[#23]
Quote HistoryOriginally Posted By 8NAK4: I'm betting Mary at Doublestar Arms had something to do with it. Quote HistoryOriginally Posted By 8NAK4: Originally Posted By CloneDiseased: Originally Posted By Dobs013: Gen 1 socom obtained! http://i230.photobucket.com/albums/ee270/speedstar13/Mobile%20Uploads/IMG_0139.jpg I'm betting Mary at Doublestar Arms had something to do with it. mary......that lady......2 months we worked on her for gen juans and she shot us down...then posted on GB a lot of gen juans for sale. holland 5th SFG accuracy check:  |
|
|
|
USA
|
Posted: 10/27/2016 6:53:36 AM EDT
[#24]
Yup....Mary on GB was my in!
|
|
|
USA
|
Posted: 10/27/2016 8:03:45 AM EDT
[#25]
I love you people... Managing to get new old stock Gen I's out on the market
|
|
|
|
Posted: 10/27/2016 9:27:23 AM EDT
[#26]
Quote HistoryOriginally Posted By RTUtah: Good post, thanks Stukas. Quote HistoryOriginally Posted By RTUtah: Originally Posted By Stukas87: Having been in the unit (5th SFG) when the SPR (MK12 came out.) The history overview on page 1 is correct I never heard of that set up being called the Holland. But I can understand the name. And Ace stocks were popular at the time because of the different lengths you could buy for your Post ban AR's. Now Steve was instrumental in the development SPR, it was really a 5th SFG initiative. He and a few other 5th SFG guys really developed it. Only reason it has a MK12 name (Navy) is our connection to Crane for all our small arms. SF side of the house its really a SPR Special Purpose Rifle I remember shooting 5 early prototypes he brought out to the range in circa 1999. Now It was very common to shit can the full length A2 butt stock put a collapsible on it. Good post, thanks Stukas. |
|
|
|
|
Posted: 10/27/2016 10:29:01 PM EDT
[#27]
Back in business fellas
 " />
|
|
|
|
|
Posted: 10/28/2016 9:01:32 AM EDT
[#28]
there ya go!. lookin nice.
|
|
|
|
USA
|
Posted: 10/28/2016 9:14:50 AM EDT
[#29]
Quote HistoryOriginally Posted By chenault:
Back in business fellas http://<a href=http://i32.photobucket.com/albums/d23/pcrunnels/IMG_0805_zpsaeuzxe54.jpg</a>" /> Nice!! |
|
|
|
Posted: 10/28/2016 10:29:09 AM EDT
[#30]
Quote HistoryOriginally Posted By chenault:
Back in business fellas http://<a href=http://i32.photobucket.com/albums/d23/pcrunnels/IMG_0805_zpsaeuzxe54.jpg</a>" /> That looks really hawt with the unpainted can |
|
|
|
|
Posted: 10/28/2016 3:00:12 PM EDT
[Last Edit: cmb5286]
[#31]
Edit: Also debating which barrel to get. Bison Armory or wait until the Ballistic Advantage ones come back in stock?
It's starting... 
|
|
|
|
|
Posted: 10/28/2016 3:33:39 PM EDT
[#32]
every DOES know that the carbine length tube is the correct issued length, yes? and that only one person ever used a long one, and its because he is a cloaner in here and he wanted to keep the look but add more length, yes?
just checking lol. |
|
|
|
USA
|
Posted: 10/28/2016 3:42:52 PM EDT
[Last Edit: Dobs013]
[#33]
Quote HistoryOriginally Posted By HaveBlue83:
every DOES know that the carbine length tube is the correct issued length, yes? and that only one person ever used a long one, and its because he is a cloaner in here and he wanted to keep the look but add more length, yes? just checking lol. So you'll chop them all down for us?
ETA-There's another auction up on GB |
|
|
|
Posted: 10/28/2016 3:44:50 PM EDT
[#34]
Quote HistoryOriginally Posted By HaveBlue83:
every DOES know that the carbine length tube is the correct issued length, yes? and that only one person ever used a long one, and its because he is a cloaner in here and he wanted to keep the look but add more length, yes? just checking lol. I just prefer the longer eye relief. |
|
|
|
|
Posted: 10/28/2016 3:46:48 PM EDT
[#35]
Quote HistoryOriginally Posted By Dobs013: So you'll chop them all down for us? Quote HistoryOriginally Posted By Dobs013: Originally Posted By HaveBlue83: every DOES know that the carbine length tube is the correct issued length, yes? and that only one person ever used a long one, and its because he is a cloaner in here and he wanted to keep the look but add more length, yes? just checking lol. So you'll chop them all down for us? honestly....i was gonna add that to the other things i could for the cloners (and its not that difficult to do) but someone shot that gift horse. |
|
|
|
WA, USA
|
Posted: 10/28/2016 3:47:05 PM EDT
[#36]
Quote HistoryOriginally Posted By cmb5286:
Edit: Also debating which barrel to get. Bison Armory or wait until the Ballistic Advantage ones come back in stock? It's starting... https://c1.staticflickr.com/6/5501/30507351112_8737e54f0d_b.jpg You sir have a PM. |
|
|
USA
|
Posted: 10/28/2016 3:49:19 PM EDT
[#37]
Quote HistoryOriginally Posted By HaveBlue83:
honestly....i was gonna add that to the other things i could for the cloners (and its not that difficult to do) but someone shot that gift horse. Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By Dobs013:
Originally Posted By HaveBlue83:
every DOES know that the carbine length tube is the correct issued length, yes? and that only one person ever used a long one, and its because he is a cloaner in here and he wanted to keep the look but add more length, yes? just checking lol. So you'll chop them all down for us? honestly....i was gonna add that to the other things i could for the cloners (and its not that difficult to do) but someone shot that gift horse. There's always someone that screws it up for everyone |
|
|
USA
|
Posted: 10/28/2016 3:55:54 PM EDT
[Last Edit: Dobs013]
[#38]
Honestly I thought about just ordering a carbine length foam sleeve to make it "look" like an extended carbine length. If I had a carbine length it would be extended all the time anyway.
|
|
|
|
Posted: 10/28/2016 4:35:50 PM EDT
[#39]
What's a good source for the barrel with the SPR profile at the muzzle? I really like Rainier's ultramatch and Rock Creek barrels, but they don't seem to have the step down for the collar on the 16" barrels.
|
|
|
|
|
Posted: 10/28/2016 5:45:19 PM EDT
[#40]
Quote HistoryOriginally Posted By Will816:
What's a good source for the barrel with the SPR profile at the muzzle? I really like Rainier's ultramatch and Rock Creek barrels, but they don't seem to have the step down for the collar on the 16" barrels. Ballistic Advantage, Bison Armory. Custom order from PRI or CLE. |
|
|
|
|
Posted: 10/28/2016 6:20:48 PM EDT
[#41]
Quote HistoryOriginally Posted By lancecriminal86:
Ballistic Advantage, Bison Armory. Custom order from PRI or CLE. Quote HistoryOriginally Posted By lancecriminal86:
Originally Posted By Will816:
What's a good source for the barrel with the SPR profile at the muzzle? I really like Rainier's ultramatch and Rock Creek barrels, but they don't seem to have the step down for the collar on the 16" barrels. Ballistic Advantage, Bison Armory. Custom order from PRI or CLE. Douglass from High Caliber Sales is another option |
|
|
|
|
Posted: 10/28/2016 6:21:23 PM EDT
[#42]
Quote HistoryOriginally Posted By HaveBlue83:
honestly....i was gonna add that to the other things i could for the cloners (and its not that difficult to do) but someone shot that gift horse. Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By Dobs013:
Originally Posted By HaveBlue83:
every DOES know that the carbine length tube is the correct issued length, yes? and that only one person ever used a long one, and its because he is a cloaner in here and he wanted to keep the look but add more length, yes? just checking lol. So you'll chop them all down for us? honestly....i was gonna add that to the other things i could for the cloners (and its not that difficult to do) but someone shot that gift horse. Which is a shame because all of your work is excellent. |
|
|
|
|
Posted: 10/28/2016 7:06:35 PM EDT
[#43]
Quote HistoryOriginally Posted By Dobs013: Honestly I thought about just ordering a carbine length foam sleeve to make it "look" like an extended carbine length. If I had a carbine length it would be extended all the time anyway. shittt...i wish i took a pic. i did that when i had both....it looked legit minus the top notch LOL. do that. chenault my work aint great...yet. lol. but thanks! |
|
|
|
|
Posted: 10/28/2016 7:25:07 PM EDT
[#44]
Quote HistoryOriginally Posted By HaveBlue83:
shittt...i wish i took a pic. i did that when i had both....it looked legit minus the top notch LOL. do that. chenault my work aint great...yet. lol. but thanks! Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By Dobs013:
Honestly I thought about just ordering a carbine length foam sleeve to make it "look" like an extended carbine length. If I had a carbine length it would be extended all the time anyway. shittt...i wish i took a pic. i did that when i had both....it looked legit minus the top notch LOL. do that. chenault my work aint great...yet. lol. but thanks! Wasn't it you that made the modified ARMS rings without the stops. I thought that was nice work |
|
|
|
|
Posted: 10/28/2016 7:37:32 PM EDT
[#45]
Quote HistoryOriginally Posted By chenault: Wasn't it you that made the modified ARMS rings without the stops. I thought that was nice work Quote HistoryOriginally Posted By chenault: Originally Posted By HaveBlue83: Originally Posted By Dobs013: Honestly I thought about just ordering a carbine length foam sleeve to make it "look" like an extended carbine length. If I had a carbine length it would be extended all the time anyway. shittt...i wish i took a pic. i did that when i had both....it looked legit minus the top notch LOL. do that. chenault my work aint great...yet. lol. but thanks! Wasn't it you that made the modified ARMS rings without the stops. I thought that was nice work yeah. but I'm my hardest critic lol. they were ok. going pewing tomorrow! its been 3 days or so....im fiending lol |
|
|
|
|
Posted: 10/28/2016 8:03:01 PM EDT
[#46]
Quote HistoryOriginally Posted By HaveBlue83:
yeah. but I'm my hardest critic lol. they were ok. going pewing tomorrow! its been 3 days or so....im fiending lol Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By chenault:
Originally Posted By HaveBlue83:
Originally Posted By Dobs013:
Honestly I thought about just ordering a carbine length foam sleeve to make it "look" like an extended carbine length. If I had a carbine length it would be extended all the time anyway. shittt...i wish i took a pic. i did that when i had both....it looked legit minus the top notch LOL. do that. chenault my work aint great...yet. lol. but thanks! Wasn't it you that made the modified ARMS rings without the stops. I thought that was nice work yeah. but I'm my hardest critic lol. they were ok. going pewing tomorrow! its been 3 days or so....im fiending lol Bro I know exactly how that is, you see every flaw and I sticks with ya. Have fun tomorrow, take photos |
|
|
|
TX, USA
|
Posted: 10/28/2016 10:31:24 PM EDT
[#47]
|
|
|
TX, USA
|
Posted: 10/28/2016 10:32:58 PM EDT
[#48]
Quote HistoryOriginally Posted By chenault:
Back in business fellas http://<a href=http://i32.photobucket.com/albums/d23/pcrunnels/IMG_0805_zpsaeuzxe54.jpg</a>" /> Are the KAC VFG good to go? I've got one I'm wanting to put on but wasn't sure. Looks great and can't wait for my can to clear! (in about 12 years thanks to 41f) |
|
|
|
Posted: 10/28/2016 10:39:36 PM EDT
[#49]
Quote HistoryOriginally Posted By cbfurg:
Crappy photo but I'll get some better ones soon. Newly completed: <a href="http://s953.photobucket.com/user/cbfurg/media/Mobile%20Uploads/ec9c1bc5-8e48-4df4-a996-67e13ec460ee.jpg.html" target="_blank">http://i953.photobucket.com/albums/ae16/cbfurg/Mobile%20Uploads/ec9c1bc5-8e48-4df4-a996-67e13ec460ee.jpg</a> Great looking rifle. I actually don't think I've seen one on a MOD-H, I should switch to a hand stop since that's what I use mine for |
|
|
|
|
Posted: 10/28/2016 10:50:32 PM EDT
[#50]
Quote HistoryOriginally Posted By cbfurg: Crappy photo but I'll get some better ones soon. Newly completed: http://i953.photobucket.com/albums/ae16/cbfurg/Mobile%20Uploads/ec9c1bc5-8e48-4df4-a996-67e13ec460ee.jpg looks great! love seeing all these differen Mod H carbines show up here. i have ran a KAC vert grip...but it aint kosher that i have ever seen. only one was a RVG in FDE. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
