AR Sponsor
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 857 of 1226)
|
Originally Posted By lancecriminal86:
Dude, I just had an idea. If @Mister_Donut could dimple or by some means affix his Ops Collar in the "correct" spot ahead of the gas block, can you do a custom can that reflexes another 2" further in, so that it goes to the correct spot? If you just threaded an extra 2" inwards of the faux can then he could just keep tightening it up until it contacts the collar... ETA: 
|
I'm late, and it's too damn drunk for this.
|
Originally Posted By Eyekahn:
From this angle mine could pass as a mk12 
https://i.imgur.com/IwQIOeT.jpg 
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
Attached File Attached File Pulled the trigger on an A1 stock set up from a member last week. Should I swap the whole A2 butt plate on or just rock the door on this old plate? Case is getting there. Need to get the right length rod and the bipod. Can is going to wait a little. |
|
Originally Posted By secretwheelman:
That's a damn good idea. ETA: Originally Posted By secretwheelman:
Originally Posted By lancecriminal86:
Dude, I just had an idea. If @Mister_Donut could dimple or by some means affix his Ops Collar in the "correct" spot ahead of the gas block, can you do a custom can that reflexes another 2" further in, so that it goes to the correct spot? If you just threaded an extra 2" inwards of the faux can then he could just keep tightening it up until it contacts the collar... ETA: Makes me sad we'll never get the sound protection we need up here, but it's pretty awesome that there are guys on here lookong out for us guys that can't have the fun stuff. Those faux cans that HARMS4X is turning out look absolutely incredible! |
|
Originally Posted By Mister_Donut:
I will definitely consider it if that Airsoft can doesn't fit (ordered one last week with the other guys). It's just for photos anyway, so not super important, but they definitely do look awesome with the can on it...... Makes me sad we'll never get the sound protection we need up here, but it's pretty awesome that there are guys on here lookong out for us guys that can't have the fun stuff. Those faux cans that HARMS4X is turning out look absolutely incredible! Attached File Attached File |
|
Originally Posted By Mister_Donut:
I will definitely consider it if that Airsoft can doesn't fit (ordered one last week with the other guys). It's just for photos anyway, so not super important, but they definitely do look awesome with the can on it...... Makes me sad we'll never get the sound protection we need up here, but it's pretty awesome that there are guys on here lookong out for us guys that can't have the fun stuff. Those faux cans that HARMS4X is turning out look absolutely incredible! |
|
Originally Posted By revottuneda4:
Page 1 Originally Posted By revottuneda4:
Originally Posted By Weasel_Master:
Finally going to jump on the bandwagon. Is there a list of acceptable scopes? |
---
NRA Life Member
USN Retired
NRA Life Member
USN Retired
|
Originally Posted By HARMS4X:
Thanks man the cans are almost ready to ship https://www.AR15.Com/media/mediaFiles/187307/IMG_2562-276178.JPGhttps://www.AR15.Com/media/mediaFiles/187307/IMG_2557-276177.JPG |
|
Originally Posted By AL1EN:
Are they all spoken for? If not how much? Attached File Attached File |
|
Originally Posted By HARMS4X:
I'll be making more https://www.AR15.Com/media/mediaFiles/187307/IMG_2571-276804.JPGhttps://www.AR15.Com/media/mediaFiles/187307/IMG_2577-276802.JPG Originally Posted By HARMS4X:
Originally Posted By AL1EN:
Are they all spoken for? If not how much? https://www.AR15.Com/media/mediaFiles/187307/IMG_2571-276804.JPGhttps://www.AR15.Com/media/mediaFiles/187307/IMG_2577-276802.JPG how much? Need one will my AEM5 is in jail |
No free man shall ever be debarred the use of arms
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
|
Originally Posted By FREEFALLE7:
just swapped out my one piece mount with some Arms rings. You have chosen....wisely. |
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?"
"I don't remember. That's the second thing they teach you."
"Who taught you?"
"I don't remember. That's the second thing they teach you."
|
Originally Posted By Engel12626:
http://i.imgur.com/5neD2QI.jpg Finally found a good deal on a 99051, and Larue got replaced with a Unimount I switched out my uni mount for some Arms rings, did it for looks only. Uni mount is a great mount, you will not be dissapointed. |
No free man shall ever be debarred the use of arms
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
|
Originally Posted By mvician:
Any leads on where to find a surplus Mk12 Mod1 Pelican 1700  |
|
Originally Posted By MisterMoad:
Finally got a real ARMS SPR PEQ Sleeve. http://i.imgur.com/4GNEZWY.jpg http://i.imgur.com/h2CJpzh.jpg 
|
No free man shall ever be debarred the use of arms
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
|
Originally Posted By Super_Trouper:
Is anyone using the Ballistic Advantage barrel? I'm not going for full out clone, my MK12 will look just like one, but may not use some of the same brand parts, due to it being a hard use shooter. Curious how the BA barrel shoots. Thanks! |
-Things do not happen. Things are made to happen. -JFK
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
-Beware the fury of a patient man.
-Thousands and thousands of laws....All for just ten commandments.
-"alot" is not a word.
|
Originally Posted By Super_Trouper:
Is anyone using the Ballistic Advantage barrel? I'm not going for full out clone, my MK12 will look just like one, but may not use some of the same brand parts, due to it being a hard use shooter. Curious how the BA barrel shoots. Thanks! |
|
Originally Posted By vagpunisher:
I'm running one in 223 wylde and it shoots outstanding with anything I feed it. Especially mk262. And unless you pulled my handguard off and looked at the laser etching on it, you'd never know it wasn't 100% correct |
|
Originally Posted By mvician:
Ignore the scope...Leupold 67925 arrives tomorrow. Brownells A1 lower arrived and assembled. http://i48.photobucket.com/albums/f240/mvician/Mk12%20Mod1/P1250547_zpsmzq6hkue.jpg |
 20170811_143405 by B A, on Flickr
 20170811_174623 by B A, on Flickr
|
Our motto: Apocalypse Now
NORCAL Nickname: Gadsen
NORCAL Nickname: Gadsen
|
Originally Posted By HaveBlue83:
OFF TOPIC: so how is that ACSS optic? i was gonna make moms a recce rifle and i think that optic wpuld be good for her out to 500yds. she is some kind of nasty with an AR! how close are holdovers with ml262/77 gr pills? and nice job on that TRR chop The chop job was pretty simple. Hacksaw and some time sanding it smooth and then paint.
|
|
Originally Posted By Engineer5:
Whew...you had me worried for a bit.  Post up that EOD build when it's done.Originally Posted By Engineer5:
Originally Posted By AL1EN:
The stock is for my EOD mk18 that I'm building Post up that EOD build when it's done.
|
"I'll tell you what war is about, you've got to kill people, and when you've killed enough they stop fighting." GEN Curtis LeMay
"Someday this war's gonna end..." LTC William Kilgore
"Someday this war's gonna end..." LTC William Kilgore
|
Originally Posted By mvician:
Chopped ARMS TRC and TRR http://i48.photobucket.com/albums/f240/mvician/Mk12%20Mod1/P1250528_zpskxb6g1xw.jpg |
Well looky what showed up just waiting on my stencil from DogFightInk to come in..
Finally got to zero in the MK4, Left Side were IMI 77gr, and Right Side BH 77gr.. @100 yards with slight wind, and rushing the shots lol.. 
My last group of the day with the IMI 77gr.. 
|
Can someone hook me up with the AEM5 barrel profile specs again? I took a quick look, but I don't have the picture/sketch I'm thinking of saved. Brainstorming another bastard Mk12 and thinking about utilizing a new LaRue, or a Bartlein I have here that's not getting enough love. But, I'm not sure I can pull it off, wanna do some more numbers crunching before telling ADCO to fix it. 
|
WTB:
- Wilcox Micro Reflex Sight mount for NF Rings
- NF 2.5-10x24 MOAR
- Arsenal SLR-104
- Surefire x300-A
- Wilcox Micro Reflex Sight mount for NF Rings
- NF 2.5-10x24 MOAR
- Arsenal SLR-104
- Surefire x300-A
|
Originally Posted By SSOUNN:
Well looky what showed up just waiting on my stencil from DogFightInk to come in..
http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2484_zps0lcodjko.jpg Finally got to zero in the MK4, Left Side were IMI 77gr, and Right Side BH 77gr.. @100 yards with slight wind.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2485_zpspfq0cgwr.jpg My last group of the day with the IMI 77gr.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2486_zpsbki31ftx.jpg |
FBHO
|
Originally Posted By ArpaioFan:
What barrel do you have? My rifle shoots about like your top groups with a Douglas. I'm sending the upper to PRI to have them look at it. Originally Posted By ArpaioFan:
Originally Posted By SSOUNN:
Well looky what showed up just waiting on my stencil from DogFightInk to come in..
http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2484_zps0lcodjko.jpg Finally got to zero in the MK4, Left Side were IMI 77gr, and Right Side BH 77gr.. @100 yards with slight wind.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2485_zpspfq0cgwr.jpg My last group of the day with the IMI 77gr.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2486_zpsbki31ftx.jpg |
|
Originally Posted By vanquishings:
Can someone hook me up with the AEM5 barrel profile specs again? I took a quick look, but I don't have the picture/sketch I'm thinking of saved. Brainstorming another bastard Mk12 and thinking about utilizing a new LaRue, or a Bartlein I have here that's not getting enough love. But, I'm not sure I can pull it off, wanna do some more numbers crunching before telling ADCO to fix it. |
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?"
"I don't remember. That's the second thing they teach you."
"Who taught you?"
"I don't remember. That's the second thing they teach you."
|
Originally Posted By vanquishings:
Can someone hook me up with the AEM5 barrel profile specs again? I took a quick look, but I don't have the picture/sketch I'm thinking of saved. Brainstorming another bastard Mk12 and thinking about utilizing a new LaRue, or a Bartlein I have here that's not getting enough love. But, I'm not sure I can pull it off, wanna do some more numbers crunching before telling ADCO to fix it. |
I am always surprised when I wake up with a hangover, and am still able to log in
|
@blcouch
@Engel12626 Thanks to both of you. Guess I was googling the wrong thing! Looks like my idea will work after all.... I think.... LOL |
WTB:
- Wilcox Micro Reflex Sight mount for NF Rings
- Daniel Defense Fixed front sight
- Arsenal SLR-104
- Surefire x300-A
- Wilcox Micro Reflex Sight mount for NF Rings
- Daniel Defense Fixed front sight
- Arsenal SLR-104
- Surefire x300-A
|
Originally Posted By SSOUNN:
Well looky what showed up just waiting on my stencil from DogFightInk to come in..
http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2484_zps0lcodjko.jpg Finally got to zero in the MK4, Left Side were IMI 77gr, and Right Side BH 77gr.. @100 yards with slight wind, and rushing the shots lol.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2485_zpspfq0cgwr.jpg My last group of the day with the IMI 77gr.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2486_zpsbki31ftx.jpg |
No free man shall ever be debarred the use of arms
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
Thomas Jefferson
If a law is unjust, a man is not only right to disobey it, he is obligated to do so.
- Thomas Jefferson
|
Originally Posted By FREEFALLE7:
wow where did you get the 80% M16 lower? Originally Posted By FREEFALLE7:
Originally Posted By SSOUNN:
Well looky what showed up just waiting on my stencil from DogFightInk to come in..
http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2484_zps0lcodjko.jpg Finally got to zero in the MK4, Left Side were IMI 77gr, and Right Side BH 77gr.. @100 yards with slight wind, and rushing the shots lol.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2485_zpspfq0cgwr.jpg My last group of the day with the IMI 77gr.. http://i1167.photobucket.com/albums/q626/Ssounn/IMG_2486_zpsbki31ftx.jpg |
| How do you like the MTM carrier/tray setup... I noticed one of those in the calalog and looked like a good idea, as long as it can support the ammo weight OK? |
---
NRA Life Member
USN Retired
NRA Life Member
USN Retired
|
Attached File Attached File |
[quote]Originally Posted By Movistar:
Shooting unsuppressed is for the birds and criminals[/quote]
Shooting unsuppressed is for the birds and criminals[/quote]
Official Mk12 Mod0, Mod1, ModH Photo and Discussion Thread (Page 857 of 1226)
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter