AR Sponsor
OFFICIAL - 20 Inchers - Let's see them (Page 3 of 17)
Bushmaster, 20" Govt. profile 1/7" barrel. Daniel Defense 12" Omega Rail Geissele SSA-E Trigger Maytech Rear Sight Tango Down Butt Stock QD ACCOG TA31 RCOA4 Bobro (Trijicon Marked) ACCOG Mount Bobro Forward Vertical Grip Hogue Hand Grip |
Happiness is a warm gun,
Bang bang, shoot shoot.
The Beatles
Nov. 1968
Bang bang, shoot shoot.
The Beatles
Nov. 1968
Red X Arms 20in bull barrel double star lower G2S-E trigger Votex crossfire II 4-12. At first I didnt like this rifle but Ive added things to it like better glass and trigger and it will now shoot sub moa if I can do my part. I only got sub off a rest and hornady match ammo
|
" />
Sorry for the iPotato pic; will probably take a better picture later on. BCM A4 upper, LRB lower, Stag LPK, Colt stock and Carry Handle, Young Mfg. BCG, KAC M5 RAS. The one below is my M4rgery. 
|
Tennessee Squire / Maker's Mark Ambassador
RIP SGT. Robert "Bobby" Wagner - 8/1/2004, Mosul Iraq.
PS4: "Sablelieger"
RIP SGT. Robert "Bobby" Wagner - 8/1/2004, Mosul Iraq.
PS4: "Sablelieger"
|
My current 3-gun rifle.
A Green Mountain 1/12" twist 20", love it with 55gr Hornady FMJs. 
I have switched out the Stag Arms 3G brake for a Miculek brake since this picture. Thinking about switching to a Magpul MOE rifle stock eventually, but happy with the A2 stock for now. Also waiting on a micro dot to add for a 45 degree offset sight. |
At some point once in your life, someone told you something inspiring...think about that now cause I got nothing
|
Originally Posted By eeochs:
My current 3-gun rifle. A Green Mountain 1/12" twist 20", love it with 55gr Hornady FMJs. http://i1189.photobucket.com/albums/z422/erickochs/DSCN5783_zpsts3z6p4c.jpg http://i1189.photobucket.com/albums/z422/erickochs/DSCN5782_zpsxf7hcok8.jpg I have switched out the Stag Arms 3G brake for a Miculek brake since this picture. Thinking about switching to a Magpul MOE rifle stock eventually, but happy with the A2 stock for now. Also waiting on a micro dot to add for a 45 degree offset sight. I love this. I bet it handles like a dream. I am planning on doing a very similar build once the McKay A1 profile 1/7 twist CL barrels come back in stock. I'll even be using that same handguard, except in the 12" version, behind a folding FSB. I will be using the MOE rifle stock too. |
|
Originally Posted By henschman:
I love this. I bet it handles like a dream. I am planning on doing a very similar build once the McKay A1 profile 1/7 twist CL barrels come back in stock. I'll even be using that same handguard, except in the 12" version, behind a folding FSB. I will be using the MOE rifle stock too. Originally Posted By henschman:
Originally Posted By eeochs:
My current 3-gun rifle. A Green Mountain 1/12" twist 20", love it with 55gr Hornady FMJs. http://i1189.photobucket.com/albums/z422/erickochs/DSCN5783_zpsts3z6p4c.jpg http://i1189.photobucket.com/albums/z422/erickochs/DSCN5782_zpsxf7hcok8.jpg I have switched out the Stag Arms 3G brake for a Miculek brake since this picture. Thinking about switching to a Magpul MOE rifle stock eventually, but happy with the A2 stock for now. Also waiting on a micro dot to add for a 45 degree offset sight. I love this. I bet it handles like a dream. I am planning on doing a very similar build once the McKay A1 profile 1/7 twist CL barrels come back in stock. I'll even be using that same handguard, except in the 12" version, behind a folding FSB. I will be using the MOE rifle stock too. Thanks, it shoots great, much better than the man behind it! I thought the pencil weight wouldn't be good for competition, but I have not had any issues yet with overheating or losing accuracy during a string. Adding the Miculek comp really made a difference on follow up speed. This started as a carbine build, I also noticed a difference when I switched from a carbine buffer tube setup to a rifle buffer tube setup. It is a very fast handling rifle that stays on target for me, props to the MI handguard for keeping it light and controllable. |
At some point once in your life, someone told you something inspiring...think about that now cause I got nothing
|
Originally Posted By BentoBox: 6.5 Grendel http://i271.photobucket.com/albums/jj130/ABTOCMEPTb/D37DDCFE-8E83-4B88-B74D-7B4543CC9C4F.jpg  Your rear scope mount bugs me. Were there irons behind that at one point? |
Teener Crew 4 Lyfe
86-239
"The .30-06 is never a mistake." - Townsend Whelen
FBHO
86-239
"The .30-06 is never a mistake." - Townsend Whelen
FBHO
|
Originally Posted By OlCrow: Do you guys know if you click on any picture on the page it will open a picture viewer so you can look at each picture on the page? I just noticed this, something new or I'm slow in finding that out. Staff has been monkeying with that for about a month. I think there's a big thread on it in Site Suggestions under General. |
Teener Crew 4 Lyfe
86-239
"The .30-06 is never a mistake." - Townsend Whelen
FBHO
86-239
"The .30-06 is never a mistake." - Townsend Whelen
FBHO
|
Originally Posted By OlCrow:
Do you guys know if you click on any picture on the page it will open a picture viewer so you can look at each picture on the page? I just noticed this, something new or I'm slow in finding that out. I thought it was something my IPad was doing. |
BCM govt 20 upper 1/7 twist with MI handguards PSA lower Leupold VX R 2-7 in American Defense extended mount Wanted to try this out, was prepared to swap out for fixed stock but I like it. Balances good for me and I get a cheek weld right in line. I set this up for hunting coyotes to calls and still hunting hogs. 62 & 77 gr zeroed at 200yds has been altogether consistent enough for what I intended. |
|
Originally Posted By RealWildOne: http://i1370.photobucket.com/albums/ag249/clintsimonton/Mobile%20Uploads/image_zpsloxnyf9h.jpg BCM govt 20 upper 1/7 twist with MI handguards PSA lower Leupold VX R 2-7 in American Defense extended mount Wanted to try this out, was prepared to swap out for fixed stock but I like it. Balances good for me and I get a cheek weld right in line. I set this up for hunting coyotes to calls and still hunting hogs. 62 & 77 gr zeroed at 200yds has been altogether consistent enough for what I intended. 20s usually look a bit off with a waffle stock, but I like that. |
Teener Crew 4 Lyfe
86-239
"The .30-06 is never a mistake." - Townsend Whelen
FBHO
86-239
"The .30-06 is never a mistake." - Townsend Whelen
FBHO
|
Originally Posted By HighpowerRifleBrony: Your rear scope mount bugs me. Were there irons behind that at one point? Originally Posted By HighpowerRifleBrony: Originally Posted By BentoBox: 6.5 Grendel http://i271.photobucket.com/albums/jj130/ABTOCMEPTb/D37DDCFE-8E83-4B88-B74D-7B4543CC9C4F.jpg Your rear scope mount bugs me. Were there irons behind that at one point? It looks to me that if the rear ring was turned around there wouldn't be enough room for a rear BUIS. And...your avatar bugs me.  |
I plead the 2nd.
 M16A1 barrel Cav Arms A1 stock with M16A1 buttplate DSA Upper and generic carry handle |
Don't be so open-minded that your brains fall out.
General education should not be mere job training, but training of the mind to reason. http://www.welltrainedmind.com/classical-education/
General education should not be mere job training, but training of the mind to reason. http://www.welltrainedmind.com/classical-education/
|
Originally Posted By MRW:
http://i1011.photobucket.com/albums/af236/onehalfmvsquared/hobby/M16A1%20bbl%20with%20M4%20carry%20handle_zpsterjbz6w.jpg M16A1 barrel Cav Arms A1 stock with M16A1 buttplate DSA Upper and generic carry handle I'm in LOVE |
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
|
Originally Posted By JJREA: Originally Posted By MRW: http://i1011.photobucket.com/albums/af236/onehalfmvsquared/hobby/M16A1%20bbl%20with%20M4%20carry%20handle_zpsterjbz6w.jpg M16A1 barrel Cav Arms A1 stock with M16A1 buttplate DSA Upper and generic carry handle I'm in LOVE  |
Don't be so open-minded that your brains fall out.
General education should not be mere job training, but training of the mind to reason. http://www.welltrainedmind.com/classical-education/
General education should not be mere job training, but training of the mind to reason. http://www.welltrainedmind.com/classical-education/
|
I'm kicking myself for getting rid of an old SAK barreled A1 upper I had for a little while. I slapped my Colt A2 bolt in there and put on a 4x scope on the carry handle and I shot some 52 grain match bullets and some other 55 grain stuff and it was very surprising at how well it shot. I'm pretty sure there were some groups smaller than 2 MOA. I was kind of careful about not shooting too fast because of the profile of the barrel. If I can find the pics I'll post them.
But needless to say, I was sold on the fact that it doesn't need to be a heavy barrel to group well. |
Jesus came to comfort the afflicted and afflict the comfortable. - My Pastor
Before and after paint. BCM upper with 20" 410 SS 5.56 match barrel Geissele SSA-E trigger in a Stag lower Pictured with an old vltor stock but now has a Gen 1 Sopmod stock YHM 12" free float handguard PA 4-14 ffp optic Rattle can paint, except barrel is duracoat. |
" />
|
This one is almost finished, still have a few more things to add.
Upper: PSA stripped upper RRA upper parts kit AIM Nitride BCG WIndham Weaponry 20 inch 1:7 barrel YHM diamond Free FLoat rail Lower: Surplus Ammo and Arms lower PSA LPK RRA A2 stock kit Ergo Grip Optics: Bushnell AR Optics 4.5-18 in Vortex Rings 
|
|
Originally Posted By jondelong: here is mine...softest shooter of the family. love it. http://www.ar15.com/media/viewFile.html?i=78207 Nice A4 clone! I built my A4 clone on a RRA lower as well. |
|
Originally Posted By jaqufrost:
Nice A4 clone! I built my A4 clone on a RRA lower as well. Originally Posted By jaqufrost:
Originally Posted By jondelong:
here is mine...softest shooter of the family. love it. http://www.ar15.com/media/viewFile.html?i=78207 Nice A4 clone! I built my A4 clone on a RRA lower as well. Thanks, like I said, one of my favorites. That and my 10.5" still learning to love a 16" - not sure why, but either long or short is most comfy |
FBHO
|
Originally Posted By jondelong:
Thanks, like I said, one of my favorites. That and my 10.5" still learning to love a 16" - not sure why, but either long or short is most comfy Originally Posted By jondelong:
Originally Posted By jaqufrost:
Originally Posted By jondelong:
here is mine...softest shooter of the family. love it. http://www.ar15.com/media/viewFile.html?i=78207 Nice A4 clone! I built my A4 clone on a RRA lower as well. Thanks, like I said, one of my favorites. That and my 10.5" still learning to love a 16" - not sure why, but either long or short is most comfy I tend to agree. I have no love for a 16" except a Mk12 mod H. But I do have a bunch of love for a 14.5, which probably makes about as much sense as a football bat. 
The shorter variants would be bomb diggity for HD in my eyes. (10.3-10.5 etc) ETA I do love the 20" as well, in A1, A2, and A4 form. |
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit.
If it aint a clone or the gun being cloned, it aint shit.
|
Very nice but the mags need swapped  |
|
Originally Posted By jaqufrost:
Very nice but the mags need swapped Originally Posted By jaqufrost:
Very nice but the mags need swapped Thanks, but negative. The C7 should have a Thermold mag, but instead, I'm using the PMag because they look similar and I'm not buying a Thermold. They'd both have aluminum USGI mags if it wasn't for that. |
MoS #4
|
Originally Posted By 86HMMWV:
<a href="http://s212.photobucket.com/user/dieselpowrguy85/media/FE4D6E8D-15FF-4A33-A032-CE8D6836E1B5-4541-000005235D87C421_zpsq4au6jvd.jpg.html" target="_blank">http://i212.photobucket.com/albums/cc145/dieselpowrguy85/FE4D6E8D-15FF-4A33-A032-CE8D6836E1B5-4541-000005235D87C421_zpsq4au6jvd.jpg</a> Sweet Posted Via AR15.Com Mobile |
OFFICIAL - 20 Inchers - Let's see them (Page 3 of 17)
AR Sponsor