Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
6/25/2026 9:48:28 PM EDT
Anyone have LPVOs with HARD use?
6/25/2026 9:57:51 PM EDT
[#1]
Originally Posted By tet493:
Anyone have LPVOs with HARD use?
View Quote


What's your definition of hard use?  Heavy recoil?  Being dropped down a mountain?  Extreme hot/cold weather?
6/25/2026 9:59:55 PM EDT
[Last Edit: scuba_steve][Edited] [#2]
I don't know them all, but a Nightforce ATACR 1-8 in a Spuhr mount would be a pretty solid pick.
6/25/2026 10:33:45 PM EDT
[#3]
The mount is the failure point most commonly for lpvos that are abused

The Vcog has the most robust mounting solution probably.  Not the best scope though
“All things are said already, but since no one is listening, it is always necessary to start again.”
6/25/2026 10:36:25 PM EDT
[#4]
Quote History
Originally Posted By Moondog:


What's your definition of hard use?  Heavy recoil?  Being dropped down a mountain?  Extreme hot/cold weather?
View Quote


Shooting, bumping around(this actually does kill kit), and dropping.
6/25/2026 10:57:40 PM EDT
[#5]
Quote History
Originally Posted By micmac:
The mount is the failure point most commonly for lpvos that are abused

The Vcog has the most robust mounting solution probably.  Not the best scope though
View Quote


No personal experience with a VCOG.  Brass Facts says their VCOG broke after about 600 rounds of .308 on a SCAR 17.

Who Has The Better LPVO? Army Vs USMC


But I believe SCAR 17 is known to be tough on optics so make of it what you will.
6/25/2026 11:00:02 PM EDT
[#6]
The issue with the SCAR is the harmonics caused by the upper recoever.  It's a special case.  Unless an optic is specifically designed to withstand it, the Scar eats optics

It doesn't mean the Vcog isn't a tough optic
“All things are said already, but since no one is listening, it is always necessary to start again.”
6/25/2026 11:04:24 PM EDT
[#7]
Maybe the Razor 1-6 non E version  (more brass internal parts) followed by the gen 2 E. Along with ATACR.
6/25/2026 11:43:48 PM EDT
[#8]
Quote History
Originally Posted By Teller_Ulam:
Maybe the Razor 1-6 non E version  (more brass internal parts) followed by the gen 2 E. Along with ATACR.
View Quote


Vortex is good if you have an armory and squad to back you up. Otherwise, I’m going for something else.
6/26/2026 12:18:59 AM EDT
[#9]
I've ran a razor gen ii e for 3 or 4 years now on my 3gun rifle.

I know a LOT of guys that run the same or the Gen iii. None have ever had any problems with them. If you want something that's going to stand up to abuse, look at what 3 gunners are using.  The amount of abuse our equipment takes is stupid.  If it can't stand the abuse, people don't use it.
6/26/2026 12:41:18 AM EDT
[#10]
Quote History
Originally Posted By platonicsolid:


No personal experience with a VCOG.  Brass Facts says their VCOG broke after about 600 rounds of .308 on a SCAR 17.

https://www.youtube.com/watch?v=mSPdv8qeclM|710

But I believe SCAR 17 is known to be tough on optics so make of it what you will.
View Quote

Sig sent the vcog and tango scope. They also did something similar recently. Forgot if its p320 vs glock or something. The non sig product failed dramatically.
6/26/2026 12:47:50 AM EDT
[#11]
Trijicon TR24 or 25. No electronics to break.
6/26/2026 1:10:06 AM EDT
[#12]
I used one to hammer 5 nails into a board.  

Then rotated it and did 5 more.

Then shot 100 rounds at 200m
I'm bullsh!tting you. But maybe I should🤔
6/26/2026 4:03:58 AM EDT
[#13]
Quote History
Originally Posted By NotIssued:
I used one to hammer 5 nails into a board.  

Then rotated it and did 5 more.

Then shot 100 rounds at 200m
I'm bullsh!tting you. But maybe I should🤔
View Quote



I mean, hard wood?  Pine?  Only 5 nails?

“All things are said already, but since no one is listening, it is always necessary to start again.”
6/26/2026 8:34:59 AM EDT
[#14]
My uneducated guess would be the ATACR, VCOG, and maybe the S&B PMII
6/26/2026 8:51:22 AM EDT
[#15]
durable in what sense? Scope bodies aren't typically a failure point. The vcog is most likely the "strongest" externally, but its typically the internals that fail on optics. NF's offerings seem to do very well but for the most part a solid scope is a solid scope. I don't believe the VCOG is internally any stronger than other offerings in the same class
6/26/2026 1:47:43 PM EDT
[#16]
Probably a NF.

I leaned my Razor G2E against the front of the 4 wheeler and forgot when I went to go down range.  I completely crunched the rifle in the wheel well when I lurched forward. Gun was pretty beat up scope definitely experienced some forces.  Held zero and gets treated semi roughly.  Sample size of 1 I know. I had to use the vortex warranty twice for 2 diff PST gen 2 vipers.
Isaiah 1:18 - "Come now, let us reason together," says the LORD: "though your sins are like scarlet, they shall be as white as snow"
6/26/2026 1:55:05 PM EDT
[Last Edit: tet493][Edited] [#17]
Quote History
Originally Posted By hoody2shoez:
durable in what sense? Scope bodies aren't typically a failure point. The vcog is most likely the "strongest" externally, but its typically the internals that fail on optics. NF's offerings seem to do very well but for the most part a solid scope is a solid scope. I don't believe the VCOG is internally any stronger than other offerings in the same class
View Quote View All Quotes
View All Quotes
Quote History
Originally Posted By hoody2shoez:
durable in what sense? Scope bodies aren't typically a failure point. The vcog is most likely the "strongest" externally, but its typically the internals that fail on optics. NF's offerings seem to do very well but for the most part a solid scope is a solid scope. I don't believe the VCOG is internally any stronger than other offerings in the same class


In the matter of internals not moving around. No zero shifting after riding in a truck all day or getting bumped around.

Some guys have tested the Trijicon offerings and found them to hold zero better than most everything.

NX6 looks like the answer to the test.

Originally Posted By Fooboy:
Probably a NF.

I leaned my Razor G2E against the front of the 4 wheeler and forgot when I went to go down range.  I completely crunched the rifle in the wheel well when I lurched forward. Gun was pretty beat up scope definitely experienced some forces.  Held zero and gets treated semi roughly.  Sample size of 1 I know. I had to use the vortex warranty twice for 2 diff PST gen 2 vipers.


My question would be what percentage of Razors can ACTUALLY handle this and how many times. Once or twice is no big deal, but putting it in the back of a truck in a pelican box(full of other equipment and no padding) all the time is the real test.
6/26/2026 2:56:31 PM EDT
[#18]
Quote History
Originally Posted By tet493:


In the matter of internals not moving around. No zero shifting after riding in a truck all day or getting bumped around.

Some guys have tested the Trijicon offerings and found them to hold zero better than most everything.

NX6 looks like the answer to the test.



My question would be what percentage of Razors can ACTUALLY handle this and how many times. Once or twice is no big deal, but putting it in the back of a truck in a pelican box(full of other equipment and no padding) all the time is the real test.
View Quote View All Quotes
View All Quotes
Quote History
Originally Posted By tet493:
Originally Posted By hoody2shoez:
durable in what sense? Scope bodies aren't typically a failure point. The vcog is most likely the "strongest" externally, but its typically the internals that fail on optics. NF's offerings seem to do very well but for the most part a solid scope is a solid scope. I don't believe the VCOG is internally any stronger than other offerings in the same class


In the matter of internals not moving around. No zero shifting after riding in a truck all day or getting bumped around.

Some guys have tested the Trijicon offerings and found them to hold zero better than most everything.

NX6 looks like the answer to the test.

Originally Posted By Fooboy:
Probably a NF.

I leaned my Razor G2E against the front of the 4 wheeler and forgot when I went to go down range.  I completely crunched the rifle in the wheel well when I lurched forward. Gun was pretty beat up scope definitely experienced some forces.  Held zero and gets treated semi roughly.  Sample size of 1 I know. I had to use the vortex warranty twice for 2 diff PST gen 2 vipers.


My question would be what percentage of Razors can ACTUALLY handle this and how many times. Once or twice is no big deal, but putting it in the back of a truck in a pelican box(full of other equipment and no padding) all the time is the real test.

trijicon scopes aren't special internally, to include the vcog. DLO did a series on this I believe
6/26/2026 3:07:40 PM EDT
[#19]
Quote History
Originally Posted By Moondog:


What's your definition of hard use?  Heavy recoil?  Being dropped down a mountain?  Extreme hot/cold weather?
View Quote View All Quotes
View All Quotes
Quote History
Originally Posted By Moondog:
Originally Posted By tet493:
Anyone have LPVOs with HARD use?


What's your definition of hard use?  Heavy recoil?  Being dropped down a mountain?  Extreme hot/cold weather?


I'd add rain, humidity, dust, and submersion for the heavy use definition.

I know I'll never go home.
So set fire to your ships, and past regrets, and be free.
6/26/2026 3:15:04 PM EDT
[#20]
You probably already realize this, but most people aren't tracking the zero of their optic close enough or established it with a statisticly large enough group size to evaluate this properly. By that I mean a 30round group baseline for a zero. I suspect many/most of the LPVOs on the market will shift with some abuse but is largely unnoticed when the rifle is not perfectly zeroed and a lot of the ammo being used is 2 moa+.

Nightforce commonly makes some of the most durable scopes on the market, with some of the most usable reticles and FFP. Trijicon has in recent years improved the durability of their scope offerings and advertise as such. S&B has some good offerings as well.

6/26/2026 3:31:47 PM EDT
[#21]
Quote History
Originally Posted By Teller_Ulam:
Maybe the Razor 1-6 non E version  (more brass internal parts) followed by the gen 2 E. Along with ATACR.
View Quote


Not the Razor.  I've seen several of them die from the recoil of a SCAR.
6/26/2026 3:40:07 PM EDT
[#22]
TR24 in a Larue 104 has sat atop my 50 Beowulf since 2016 and has been the exclusive shotgun zone deer rifle. It’s been through rain, snow, and mud, bumped against rocks, trees, and truck beds, and once dropped 18ft out of a stand.

The drop messed with my head, but the scope has never lost zero. Tritium is dimmer, but no other issues. At all.
6/26/2026 6:58:05 PM EDT
[#23]
Quote History
Originally Posted By micmac:
The issue with the SCAR is the harmonics caused by the upper recoever.  It's a special case.  Unless an optic is specifically designed to withstand it, the Scar eats optics

It doesn't mean the Vcog isn't a tough optic
View Quote

Agree. Anything on the 17 is specific to the 17. Lots of durable optics break on the 17, and lots of cheap optics hold up great. It’s not terribly relevant to this discussion either direction.
6/29/2026 5:47:49 PM EDT
[#24]
LPVOs really are not durable in the way you are describing. They are the most fragile across the board compared to red dots and prisms. Almost all have 6061 extruded bodies with fine threaded internal adjustments and a clamped on mount... the VCOG being the most notable exception.

That said, they are much more durable than people give them credit for.

As was already stated, the mount is a common failure point. The body diameter and leveraged overhang has much more of an effect on tube bending deflection than matetial or wall thickness.

All premium brands resist vibration and recoil nowadays.  If you need an illuminated reticle, only scopes with motion activation have decent battery life.

This should narrow your list in a fairly substantial way...

30+mm tubed, compact, auto on/off
6/30/2026 7:45:51 AM EDT
[#25]
Quote History
Originally Posted By DevL:
LPVOs really are not durable in the way you are describing. They are the most fragile across the board compared to red dots and prisms. Almost all have 6061 extruded bodies with fine threaded internal adjustments and a clamped on mount... the VCOG being the most notable exception.

That said, they are much more durable than people give them credit for.

As was already stated, the mount is a common failure point. The body diameter and leveraged overhang has much more of an effect on tube bending deflection than matetial or wall thickness.

All premium brands resist vibration and recoil nowadays.  If you need an illuminated reticle, only scopes with motion activation have decent battery life.

This should narrow your list in a fairly substantial way...

30+mm tubed, compact, auto on/off
View Quote


Best answer.

Go with whatever is in your budget from a reputable high end OEM and let jesus take the wheel.
6/30/2026 7:49:39 AM EDT
[#26]
I know CAG (Delta) uses both NF ATACR and Vortex Razor 1-6

Unlimited budget in the hands of dudes that shoot 1K a day

Good enough certification for me.
Surprise, Speed and Violence of Action
7/1/2026 5:59:38 PM EDT
[#27]
Quote History
Originally Posted By micmac:
The issue with the SCAR is the harmonics caused by the upper recoever.  It's a special case.  Unless an optic is specifically designed to withstand it, the Scar eats optics

It doesn't mean the Vcog isn't a tough optic
View Quote


It’s not the upper receiver, it’s the bolt carrier mass and distribution of that mass that causes the odd forward and rearward recoil impulse.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In

AR Sponsor