Originally Posted By -Shaggs-:
Not sure if it's been covered before or not, the search function on this site is still iffy but I went shooting yesterday and took my Jakl out for a change. I ran it suppressed and it would only fire a round or two before getting ejection failures. I cleared it, tried a different gas setting and the same would happen on all settings. After less than a mag, the carrier jammed up. I couldn't move it at all with the charge handle. So I set it aside to check when I got home.

This morning I pulled it a part thinking it just needed to be cleaned but found the piston separated from the carrier.

https://i.imgur.com/R6vbv5J.jpeg

The pin was still there too.

https://i.imgur.com/EhsS1lG.jpeg

I popped the pin out to find it partially sheared off.

https://i.imgur.com/GsgAxtF.jpeg

Luckily a trigger guard pin is the same circumference. You just need to trim the length down. Put it back together with the new pin and its back in bidness.

Originally Posted By PalmettoStateArmory:


Tagged to let people know we are taking care of you.

Thanks,

Josiah