AR Sponsor
M4A1 SOPMOD Block II clone picture thread (Page 5 of 925)
|
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Just so everyone knows, because of this thread, I've decided to part out my current upper JUST so I can afford to rebuild it into a Block II. Thanks ARFcom.  
 I did the same thing. It happens
Now don't go searching the archives for the SAM-R and SDM-R threads  They should sticky all these pic threads somewhere.. 
|
"The essence of Government is power; and power, lodged as it must be in human hands, will ever be liable to abuse." --James Madison
|
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Just so everyone knows, because of this thread, I've decided to part out my current upper JUST so I can afford to rebuild it into a Block II. Thanks ARFcom.
I did the same thing. It happens
Now don't go searching the archives for the SAM-R and SDM-R threads No kidding. I started my quest after spending time on the Mk18 thread. I had to go the 16" route because of Washington's unfriendly NFA laws. But basically, those jerks over on that thread forced me, at gunpoint, to go buy a brand new 6920 and all the accessories to make it into a SOPMOD Block II rifle. I finished it right in time for this thread to start
Since I'm trying to buy a house, I am staying away from the other picture threads. |
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2222
EE: 100% (312)
USA
|
Originally Posted By Will816:
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Just so everyone knows, because of this thread, I've decided to part out my current upper JUST so I can afford to rebuild it into a Block II. Thanks ARFcom.
I did the same thing. It happens
Now don't go searching the archives for the SAM-R and SDM-R threads No kidding. I started my quest after spending time on the Mk18 thread. I had to go the 16" route because of Washington's unfriendly NFA laws. But basically, those jerks over on that thread forced me, at gunpoint, to go buy a brand new 6920 and all the accessories to make it into a SOPMOD Block II rifle. I finished it right in time for this thread to start
http://i973.photobucket.com/albums/ae213/Will816/P7160386.jpg Since I'm trying to buy a house, I am staying away from the other picture threads. If only I didn't love my T1 so much I sold my eotech and haven't looked back. I guess it'll just count as a P.O'd optic
|
|
Stick
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
|
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Just so everyone knows, because of this thread, I've decided to part out my current upper JUST so I can afford to rebuild it into a Block II. Thanks ARFcom.
I did the same thing. It happens
Now don't go searching the archives for the SAM-R and SDM-R threads Hell, I started the Mk12 Part II thread; one SPR is enough for me! And FU, Stick.  
|
|
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Just so everyone knows, because of this thread, I've decided to part out my current upper JUST so I can afford to rebuild it into a Block II. Thanks ARFcom.
I did the same thing. It happens
Now don't go searching the archives for the SAM-R and SDM-R threads I am really thinking of doing the same thing. The only thing that''s holding me back is that the block II rifles seem nose heavy to me. I am currently running a 6920 upper with dd omega rail and I really like the way it handles. If I go for a block II setup I'd be doing a 14.5" socom weight barrel with perm'ed aac 51 tooth black out and the dd ris II rail. Anyone have any weight differences or experience with a setups similar to either of these? If so, I'd like to hear what you think. |
|
Originally Posted By m1ajunkie:
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Just so everyone knows, because of this thread, I've decided to part out my current upper JUST so I can afford to rebuild it into a Block II. Thanks ARFcom.
I did the same thing. It happens
Now don't go searching the archives for the SAM-R and SDM-R threads I am really thinking of doing the same thing. The only thing that''s holding me back is that the block II rifles seem nose heavy to me. I am currently running a 6920 upper with dd omega rail and I really like the way it handles. If I go for a block II setup I'd be doing a 14.5" socom weight barrel with perm'ed aac 51 tooth black out and the dd ris II rail. Anyone have any weight differences or experience with a setups similar to either of these? If so, I'd like to hear what you think. I had a DD drop in carbine rail on my 6920 for a few months until I decided to take the plunge on the RIS II. Glad I did. I just use the standard 16" barrel though. I think it balances great, but most of my life growing up I shot my dad's Colt R6601 with a 20" HBAR, so nothing is nose heavy to me. My Block II clone with rail, Surefire M300A, front grip, Troy sights, and SU-231 hanging off of it weighs 8 ounces less than that plain jane A2 style R6601. |
|
Originally Posted By RTUtah:
And FU, Stick. 
|
Stick
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
|
Originally Posted By RTUtah:
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Just so everyone knows, because of this thread, I've decided to part out my current upper JUST so I can afford to rebuild it into a Block II. Thanks ARFcom.
I did the same thing. It happens
Now don't go searching the archives for the SAM-R and SDM-R threads Hell, I started the Mk12 Part II thread; one SPR is enough for me! And FU, Stick. That thread cost me a lot of money, I don't go in there anymore. |
|
I have a ris II rail on the way today. Is a special wrench required to install the rail?
I have an ar wrench that will work with a regular barrel nut and what I call a regular quad rail nut that has the circle holes all the way around. Will this same wrench install the ris II rail? If not, where can I find the correct wrench? |
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2227
EE: 100% (312)
USA
|
Originally Posted By 1AEGW:
That thread cost me a lot of money, I don't go in there anymore. It's pretty damn funny how that works. I forget which page it was on, but somebody commented how the various Mk12 venders' sales must have shot through the roof simply because of that thread. Now here's one that'll make your head hurt. 
|
|
Originally Posted By RTUtah:
Originally Posted By 1AEGW:
That thread cost me a lot of money, I don't go in there anymore. It's pretty damn funny how that works. I forget which page it was on, but somebody commented how the various Mk12 venders' sales must have shot through the roof simply because of that thread. Now here's one that'll make your head hurt.
http://img641.imageshack.us/img641/9265/ddm4risiifsp.jpg Try it sometime, it works. You're not gonna get a headshot at 100 yards, but you could hit paper if you index your gun the same way every time you hold it. But still, pretty funny. |
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2233
EE: 100% (312)
USA
|
Originally Posted By RTUtah:
Originally Posted By 1AEGW:
That thread cost me a lot of money, I don't go in there anymore. It's pretty damn funny how that works. I forget which page it was on, but somebody commented how the various Mk12 venders' sales must have shot through the roof simply because of that thread. Now here's one that'll make your head hurt.
http://img641.imageshack.us/img641/9265/ddm4risiifsp.jpg What, you've never shot off of hopes and dreams before ?
|
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2235
EE: 100% (312)
USA
|
Originally Posted By Mattyvac:
Originally Posted By RTUtah:
Originally Posted By 1AEGW:
That thread cost me a lot of money, I don't go in there anymore. It's pretty damn funny how that works. I forget which page it was on, but somebody commented how the various Mk12 venders' sales must have shot through the roof simply because of that thread. Now here's one that'll make your head hurt.
http://img641.imageshack.us/img641/9265/ddm4risiifsp.jpg What, you've never shot off of hopes and dreams before ? he's not Obama..... 
|
If I got a plan for zombies, don't you think I have everything else covered?
Thou shalt not be afraid for the terror by night, Nor for the arrow that flieth by day; Psalms 91:5
Thou shalt not be afraid for the terror by night, Nor for the arrow that flieth by day; Psalms 91:5
|
Originally Posted By RTUtah:
Originally Posted By 1AEGW:
That thread cost me a lot of money, I don't go in there anymore. It's pretty damn funny how that works. I forget which page it was on, but somebody commented how the various Mk12 venders' sales must have shot through the roof simply because of that thread. Now here's one that'll make your head hurt.
http://img641.imageshack.us/img641/9265/ddm4risiifsp.jpg Looks like a classic "Oh yeah? Watch this, I'll take EVERYTHING off mine and STILL shoot better than you!" |
The twins... The color dichotomy is not intentional, it just happened to fall that way but I did set them up to be as similar in function and use as possible. The black VLTOR stock and EOtech 512 were at home on the 6920 for a while until I got the newer style tan stock and the 553. I haven't made up my mind if I want to give the old stock the rattle can treatment to match, the factory stock was on it when I got the urge to try spray painting. I'll get the mags painted eventually for sure though.
|
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2241
EE: 100% (312)
USA
|
Originally Posted By Mattyvac:
ALRIGHT YOU SONS OF BITCHES. THE TIME IS HERE TO TYPE IN ALL CAPS AND POST PICS OF MY BLOCK II CLONE. http://img.photobucket.com/albums/v404/dillsmod/4043d752.jpg http://img.photobucket.com/albums/v404/dillsmod/4ab3eabb.jpg http://img.photobucket.com/albums/v404/dillsmod/42052bbd.jpg FUCK YOU ALL FOR MAKING ME DO THIS. BUT OH I SO LOVE IT. You ain't done yet. 
 Sick stick, Matty.
|
|
Looks great, but do yourself a favor and upgrade that Fenix! Originally Posted By Mattyvac: ALRIGHT YOU SONS OF BITCHES. THE TIME IS HERE TO TYPE IN ALL CAPS AND POST PICS OF MY BLOCK II CLONE. http://img.photobucket.com/albums/v404/dillsmod/4043d752.jpg http://img.photobucket.com/albums/v404/dillsmod/4ab3eabb.jpg http://img.photobucket.com/albums/v404/dillsmod/42052bbd.jpg FUCK YOU ALL FOR MAKING ME DO THIS. BUT OH I SO LOVE IT. |
There is way too much speculation going on lately. Shoot your rifle first. THEN, if there are problems call the manufacturer.
|
Originally Posted By Mattyvac:
ALRIGHT YOU SONS OF BITCHES. THE TIME IS HERE TO TYPE IN ALL CAPS AND POST PICS OF MY BLOCK II CLONE. http://img.photobucket.com/albums/v404/dillsmod/4043d752.jpg http://img.photobucket.com/albums/v404/dillsmod/4ab3eabb.jpg http://img.photobucket.com/albums/v404/dillsmod/42052bbd.jpg FUCK YOU ALL FOR MAKING ME DO THIS. BUT OH I SO LOVE IT. No reason to be so ANGRY. You have a pretty new gun.
|
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2243
EE: 100% (312)
USA
|
Originally Posted By azoutdoorsman:
Looks great, but do yourself a favor and upgrade that Fenix! Originally Posted By Mattyvac:
ALRIGHT YOU SONS OF BITCHES. THE TIME IS HERE TO TYPE IN ALL CAPS AND POST PICS OF MY BLOCK II CLONE. http://img.photobucket.com/albums/v404/dillsmod/4043d752.jpg http://img.photobucket.com/albums/v404/dillsmod/4ab3eabb.jpg http://img.photobucket.com/albums/v404/dillsmod/42052bbd.jpg FUCK YOU ALL FOR MAKING ME DO THIS. BUT OH I SO LOVE IT. I actually really like that setup for what it is! It's very light and the LD01 puts out ALOT of light for a single AA light. When I have the cash I will upgrade to a .mil FDE light Originally Posted By RTUtah:
Originally Posted By Mattyvac:
ALRIGHT YOU SONS OF BITCHES. THE TIME IS HERE TO TYPE IN ALL CAPS AND POST PICS OF MY BLOCK II CLONE. http://img.photobucket.com/albums/v404/dillsmod/4043d752.jpg http://img.photobucket.com/albums/v404/dillsmod/4ab3eabb.jpg http://img.photobucket.com/albums/v404/dillsmod/42052bbd.jpg FUCK YOU ALL FOR MAKING ME DO THIS. BUT OH I SO LOVE IT. You ain't done yet. http://www.tacticalnfa.com/images/M4Qd.jpg Sick stick, Matty.You put that shit away right this instant young man, don't u go showing me pictures of that stuff. |
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2244
EE: 100% (312)
USA
|
Originally Posted By damcv62:
Originally Posted By Mattyvac:
ALRIGHT YOU SONS OF BITCHES. THE TIME IS HERE TO TYPE IN ALL CAPS AND POST PICS OF MY BLOCK II CLONE. http://img.photobucket.com/albums/v404/dillsmod/4043d752.jpg http://img.photobucket.com/albums/v404/dillsmod/4ab3eabb.jpg http://img.photobucket.com/albums/v404/dillsmod/42052bbd.jpg FUCK YOU ALL FOR MAKING ME DO THIS. BUT OH I SO LOVE IT. No reason to be so ANGRY. You have a pretty new gun. I was angry with joy
|
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2246
EE: 100% (312)
USA
|
Originally Posted By Mattyvac:
Originally Posted By FAB-10_Guy:
Did any of these newer rifles with the DD handguards use a cut down FSB instead of a low-profile gas block? A cut down fsb will not fit under the DD RIS II I have a cut down FSB under one of mine. |
LMT is a company with lousy QC. Buy from a company that cares about its products, like Bravo Company or LaRue.
Has BRD affected you or a loved one?
Joined:
Sep 2006
Posts:
2771
EE: 100% (114)
HI, USA
|
Originally Posted By Mattyvac: Yes it will. Originally Posted By FAB-10_Guy: Did any of these newer rifles with the DD handguards use a cut down FSB instead of a low-profile gas block? A cut down fsb will not fit under the DD RIS II |
“There are two kinds of people: sheep and sharks. Sharks are winners and they don't look back 'cause they don't have necks. Necks are for sheep.”
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2247
EE: 100% (312)
USA
|
Originally Posted By DonnieBrasco:
Originally Posted By Mattyvac:
Yes it will. Originally Posted By FAB-10_Guy:
Did any of these newer rifles with the DD handguards use a cut down FSB instead of a low-profile gas block? A cut down fsb will not fit under the DD RIS II
Don't you big eye face me. Lol rly? When I thought about it in my head it didn't seem like it, then again I am the worst estimator in the world. The rails are really thin and even a low pro gas block just barely fits between them.... But ok if y'all say so |
no TV no beer make homer something something
Joined:
Aug 2008
Posts:
1284
EE: 100% (114)
TX, USA
|
Originally Posted By Mattyvac:
Originally Posted By DonnieBrasco:
Originally Posted By Mattyvac:
Yes it will. Originally Posted By FAB-10_Guy:
Did any of these newer rifles with the DD handguards use a cut down FSB instead of a low-profile gas block? A cut down fsb will not fit under the DD RIS II
Don't you big eye face me. Lol rly? When I thought about it in my head it didn't seem like it, then again I am the worst estimator in the world. The rails are really thin and even a low pro gas block just barely fits between them.... But ok if y'all say so 
|
I KEEP IT REAL
|
Originally Posted By Postal0311:
Originally Posted By Mattyvac:
Originally Posted By FAB-10_Guy:
Did any of these newer rifles with the DD handguards use a cut down FSB instead of a low-profile gas block? A cut down fsb will not fit under the DD RIS II I have a cut down FSB under one of mine. +1, first thing I did to the Colt SOCOM barrel was shave the FSB. |
"The essence of Government is power; and power, lodged as it must be in human hands, will ever be liable to abuse." --James Madison
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2248
EE: 100% (312)
USA
|
Originally Posted By splitbolt:
I thought; 14.5" barrel + KAC flash suppressor < 16"  You can shim it to 16"also. Originally Posted By superchi:
Originally Posted By Mattyvac:
Originally Posted By DonnieBrasco:
Originally Posted By Mattyvac:
Yes it will. Originally Posted By FAB-10_Guy:
Did any of these newer rifles with the DD handguards use a cut down FSB instead of a low-profile gas block? A cut down fsb will not fit under the DD RIS II
Don't you big eye face me. Lol rly? When I thought about it in my head it didn't seem like it, then again I am the worst estimator in the world. The rails are really thin and even a low pro gas block just barely fits between them.... But ok if y'all say so https://lh4.googleusercontent.com/-vaWo_T3onUc/TivGXwpJgdI/AAAAAAAABD4/wOJ6McNYWMw/s1024/IMG_0244.JPG Fine u win
|
|
Originally Posted By ShortyB:
This is close, same concept just a few different parts. LMT lower 14.5 Noveske top end with a Larue 11.0 rail. The dog seems to like it. http://i26.photobucket.com/albums/c123/bryan3/photo-1.jpg Not even close dude. Clone, not concept. Not a single part of that is a SOPMOD, much less Block II |
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2249
EE: 100% (312)
USA
|
Originally Posted By FALbert:
I feel obligated to build another upper with this rail. Black or FDE, ACOG or Elcan, Aimpoint or Eotech, hmmmmm........ The FDE elcan and Eotech sites are correct, though operator are allowed to use privately owned sights I believe. |
Trolls Facebook with ARFCOM Articles
Joined:
Dec 2009
Posts:
2250
EE: 100% (312)
USA
|
Originally Posted By ShortyB:
Guess I can't play with the cool kids. Were not being mean to you bro, but this is a clone thread not an almost kinda sorta thread. I had to spend almost 500$ to make these assholes happy Originally Posted By 1AEGW:
He does have the sopmod stock. What is the correct BUIS for this clone? Correct buis for a clone is the FDE or 'taupe' KAC front non micro sight and an matech rear |
M4A1 SOPMOD Block II clone picture thread (Page 5 of 925)
AR Sponsor