AR Sponsor
Folding stock options (Page 2 of 2)
|
Has anyone use a Lage folding stock? I have one on a BRN180 and it’s not bad. Link  Edit to add picture |
WELCOME to The Forums at Brownells.com - Sorry about your wallet.
Feeling like a ham and mustard shake
Feeling like a ham and mustard shake
|
Originally Posted By RV8guy: Has anyone use a Lage folding stock? I have one on a BRN180 and it’s not bad. Link https://i.imgur.com/0vLL7NZ.jpg Edit to add picture That’s not bad looking. Still like the moon of the ACR better. |
|
Originally Posted By Ebolinux: That’s not bad looking. Still like the moon of the ACR better. Originally Posted By Ebolinux: Originally Posted By RV8guy: Has anyone use a Lage folding stock? I have one on a BRN180 and it’s not bad. Link https://i.imgur.com/0vLL7NZ.jpg Edit to add picture That’s not bad looking. Still like the moon of the ACR better. I was looking at this when I was researching something G36ish. Also I was wrong about the Sig Hinge. It doesnt lock folded, it was just really stiff. |
|
Originally Posted By RV8guy: Has anyone use a Lage folding stock? I have one on a BRN180 and it's not bad. Link https://i.imgur.com/0vLL7NZ.jpg Edit to add picture |
Shoot straight and tell the truth!
|
Originally Posted By TNRonin: I have one of these but due to my stroke I couldn't manipulate the locking system. It's stout and well made. Mine doesn't have the 1913 mounting system. But the luck up is the same. One thing I liked is you can set up left or right folding. My locking system lower attachment method worked great with my BRN-180. Originally Posted By TNRonin: Originally Posted By RV8guy: Has anyone use a Lage folding stock? I have one on a BRN180 and it's not bad. Link https://i.imgur.com/0vLL7NZ.jpg Edit to add picture Ace makes a hinge that uses a push button. Might be easier on ya. Otherwise you almost have to push down really hard to overcome spring tension with other stock hinges. For younger/healthier guys it isn't too bad. But I can see if being an issue for others. Attached File It will work with the Lage Adapter/Stock. I wouldnt be surprised if Lage uses Ace/Doublestar as the OEM for hinges |
|
Originally Posted By Capt_Destro: Ace makes a hinge that uses a push button. Might be easier on ya. Otherwise you almost have to push down really hard to overcome spring tension with other stock hinges. For younger/healthier guys it isn't too bad. But I can see if being an issue for others. https://www.ar15.com/media/mediaFiles/333164/DSC_A500PB__43131_jpg-2650091.JPG It will work with the Lage Adapter/Stock. I wouldnt be surprised if Lage uses Ace/Doublestar as the OEM for hinges |
Shoot straight and tell the truth!
|
Originally Posted By chevrofreak: https://www.ar15.com/media/mediaFiles/74212/Screenshot_2022-12-11-01-18-46-06_f598e1-2631409.jpg @chevrofreak Do you have more info on that, like a link to where it's available? |
|
Originally Posted By TNRonin: Appreciate it. The AGP system does the trick. Originally Posted By TNRonin: Originally Posted By Capt_Destro: Ace makes a hinge that uses a push button. Might be easier on ya. Otherwise you almost have to push down really hard to overcome spring tension with other stock hinges. For younger/healthier guys it isn't too bad. But I can see if being an issue for others. https://www.ar15.com/media/mediaFiles/333164/DSC_A500PB__43131_jpg-2650091.JPG It will work with the Lage Adapter/Stock. I wouldnt be surprised if Lage uses Ace/Doublestar as the OEM for hinges I was wondering about those. I didn't see any AGP picatinny stocks last I looked. https://agparms.com/agp-arms-lightweight-folding-stock-for-1913-rail/ |
|
Originally Posted By Wangstang: @chevrofreak Do you have more info on that, like a link to where it's available? https://hagadefense.com/b-t-mbt-stock-for-1913-rails/ I got one in a while back for my 300BLK JAKL SBR and I played with it a bit. It is lighter than the ACR, folds about the same, and has similar adjustments other than LOP, which works quite different from the ACR. The polymer doesn't seem as dense and I wonder how well the hinge point will wear if it is used a lot. I will post some pictures when my lower gets back from engraving. |
|
Anyone tried or seen on the jakl a folding mechanism that uses a standard AR buffer tube? I am wondering if that would work well; plus, probably the only way I can get an OD green stock to match my jakl’s finish, like a CTR. Also looking at that Zhukov adapter, but wondering if that would make a too long length of pull? |
|
F5 MFG will cerakote their folding JAKL stock. I asked them to cerakote mine Magpul OD Green. I'll post pictures once I have it in the F5 stock thread. Originally Posted By schiffer99: Anyone tried or seen on the jakl a folding mechanism that uses a standard AR buffer tube? I am wondering if that would work well; plus, probably the only way I can get an OD green stock to match my jakl’s finish, like a CTR. Also looking at that Zhukov adapter, but wondering if that would make a too long length of pull? |
|
Originally Posted By JeepinMark: F5 MFG will cerakote their folding JAKL stock. I asked them to cerakote mine Magpul OD Green. I'll post pictures once I have it in the F5 stock thread. Originally Posted By JeepinMark: F5 MFG will cerakote their folding JAKL stock. I asked them to cerakote mine Magpul OD Green. I'll post pictures once I have it in the F5 stock thread. Originally Posted By schiffer99: Anyone tried or seen on the jakl a folding mechanism that uses a standard AR buffer tube? I am wondering if that would work well; plus, probably the only way I can get an OD green stock to match my jakl’s finish, like a CTR. Also looking at that Zhukov adapter, but wondering if that would make a too long length of pull? Nice! Looking forward to the pictures. Thank you. |
|
Originally Posted By Wangstang: Any one utlized an MDT folding hinge to adapt a fixed position stock or carbine stock? If so, lets see how you did it. I had an MDT on a different setup and decided to try it on the jakl. No go as the little support wings interfered with the hinge closing. Do not recommend. |
Staunch proponent of dangerous freedom.
|
Originally Posted By BorderDave: Pics? Originally Posted By BorderDave: Originally Posted By schiffer99: I finally got my trap stamp and put the sig folding and collapsing stock on. Works perfect and folds tight to the side. Pics? I do… but don’t know a way to post them here. |
|
Originally Posted By Wangstang: Anything new out there to consider? How have the F5 stocks been holding up? https://www.tandemkross.com/folding_picatinny_buttstock |
|
But will it clear the JAKL's wider upper receiver when folded? |
|
I ordered one of these A3 limited run modular stock mostly due to the price, but the configurability has me intrigued. Attached File |
Shoot straight and tell the truth!
| Anyone have a newer version of the pistol? I’ve got an early model and was wondering if the adapter is still plastic or is it metal now? I was in a few PSA stores recently and the rifle and stripped lowers all had metal adapter that were sturdy. I’m asking because the plastic adapter on mine flexes a lot with a stock added (it is SBR’d). |
| I had a Sig Kate Moss and sold it (for a small fortune) and bought a Parker Mountain Machine. It cost half as much and is just as gud :) |
Originally Posted By Samuel L. Johnson:
He who makes a beast of himself, gives up the pain of being a man
He who makes a beast of himself, gives up the pain of being a man
|
Just got a 8 3/4” Lage Stock and installed it on my JAKL tonight. Really happy with this new stock. I had an MI folder that was OK but this one is more comfortable and seems a bit sturdier. Before with the MI stock: Attached File After with the Lage stock: Attached File Attached File |
Folding stock options (Page 2 of 2)
AR Sponsor