AR Sponsor
Posted: 8/9/2026 9:20:46 PM EDT
|
Howdy everyone, I am needing a decent single stage 3 position frt. I have consulted our frt pro and he recommended the new LAT. not sure I want that light or anything. Which of the three in the title would give the most okay single stage pull? Not cutting or buying any cut triggers. Just want a decent pull with no playing around. I know everyone hates on rare breed but I’m not worried about it for this application. Thanks! |
Joined:
Jun 2026
Posts:
3
EE: 100% (3)
NC, USA
| My RB L3 has about 1mm take up then a light, crisp break. Not as light as the Hiperfire in my MPX but definitely better than milspec. My Disruptor is more like a 2 stage with a fairly gritty long take up before it breaks. It has several hundred rounds through it and hasn't smoothed out, but it's certainly serviceable. I can't say that I've ever noticed the forced reset in semi mode on either of them. Of my massive sample of 2, sounds like the RB L3 would fit your application. |
|
Originally Posted By StealthyBlagga: ARC Fire is the only option on your list that does not force reset in conventional semi-auto mode. The trigger pull would be generic GI, maybe a bit lighter with reduced power springs. |
Member
Joined:
Dec 2023
Posts:
11420
EE: 100% (7)
USA
|
Originally Posted By jaqufrost: LAT also doesn't push the reset in traditional semi. Originally Posted By jaqufrost: Originally Posted By StealthyBlagga: ARC Fire is the only option on your list that does not force reset in conventional semi-auto mode. The trigger pull would be generic GI, maybe a bit lighter with reduced power springs. OP, I would buy the LAT if I were you. It is not an especially light trigger pull, certainly not light enough to be considered dangerous or hard to predict. |
I don't see no Americans. I see trespassers.
Member
Joined:
Aug 2025
Posts:
223
EE: 0% (0)
TX, USA
|
Originally Posted By jaqufrost: LAT also doesn't push the reset in traditional semi. So at least 3 of us are wondering ... If OP is willing to spend RB money, why line up the Disruptor? The LAT will shame the Distuptor and the RB in the cassete trigger game. And, OP, yes the ARC can produce better than any casette trigger if you mod your favorite trigger to drive it. |
|
Originally Posted By dredeagle: So at least 3 of us are wondering ... If OP is willing to spend RB money, why line up the Disruptor? The LAT will shame the Distuptor and the RB in the cassete trigger game. And, OP, yes the ARC can produce better than any casette trigger if you mod your favorite trigger to drive it. 1 - the pull is listed as being lighter than a rare breed. 2 - I have no interest in modifying a trigger or buying one cut. Have a two stage rare breed already. Plenty of g$ triggers for non fast firing. |
Member
Joined:
Dec 2023
Posts:
1156
EE: 100% (8)
AZ, USA
Member
Joined:
Aug 2025
Posts:
224
EE: 0% (0)
TX, USA
|
Originally Posted By thunderopossom: 1 - the pull is listed as being lighter than a rare breed. 2 - I have no interest in modifying a trigger or buying one cut. Have a two stage rare breed already. Plenty of g$ triggers for non fast firing. Thank you for posting this again. Evidently, I was too lazy to actually read past the thread title. So, my apology for the misfired opinings. |
|
Originally Posted By thunderopossom: Went with the arcfire v2. Single stage pull is decent. Can’t get the frt to work in a function check. Was bummed the surefire obc won’t work with the lever for frt. could probably trim the weight in it with a dremel From memory, I believe the RB and Partisan FRTs will work with the OBC. The SS, Atrius, Kabuto and ARC-Fire levers are too long and will get stuck/hung up on the OBC internal weight. |
|
Originally Posted By Inverted_Polarity: Remember that time that Rare Breed became a partner of the AFT and then proceeded to try to fuck over a bunch of FRT companies because Rare Breed are a bunch of scum bags? Fuck Rare Breed. You did not read the original post and this is not general discussion. |
|
Originally Posted By icura: From memory, I believe the RB and Partisan FRTs will work with the OBC. The SS, Atrius, Kabuto and ARC-Fire levers are too long and will get stuck/hung up on the OBC internal weight. If I am going to build a gun for the ARC Fire, then I will avoid the Surefire OBC, and that is kind of good news, because the OBC is downright expensive! What bolt carrier group would you suggesting using? Just any other full auto bolt? I see prices from 53 bucks to 500 bucks. |
|
Originally Posted By Malum-Prohibitum: …What bolt carrier group would you suggesting using? Just any other full auto bolt? I see prices from 53 bucks to 500 bucks. For a 5.56 rifle, any M16 profile BCG should work. Several of my ARC Fire range blaster builds use Aim Surplus $70 BCGs and they work fine. If your life is on the line, and you think you’ll need an FRT, then a higher end M16 BCG might make sense. |
|
Originally Posted By Malum-Prohibitum: If I am going to build a gun for the ARC Fire, then I will avoid the Surefire OBC, and that is kind of good news, because the OBC is downright expensive! What bolt carrier group would you suggesting using? Just any other full auto bolt? I see prices from 53 bucks to 500 bucks. The KAK DBC works great with the ArcFire You can buy just the carrier and use any bolt you want. I’ve got a G$ in mine. |
AR Sponsor