AR Sponsor
Member
Joined:
Dec 2023
Posts:
11739
EE: 100% (7)
USA
|
Interesting, but to be honest doing 3 rd bursts is plenty easy as it is. I had a few different HK G36’s over a couple years with different burst option trigger packs. It didn’t leave me with a huge love of burst setups- just one more position to go past to hit auto. But it is better than nothing, and I guess if you have trouble staying on target they are a good idea. We used Surefire M600 style weapon lights with vertical grips, so I found it was not too hard with the G36 or 416’s to do an entire mag dump at 25 yds and stay in the score zone. Nice to see GMR coming out with new ideas though. Might be a good idea for the .308 platform as it climbs a lot more than 5.56 does. |
a loaded gun won’t set you free, so you say…
|
I ordered one of these to ry out. https://stincusa.com/product/cam-activated-reset-limiter-for-super-safeties |
I don't need therapy. I just need someone to rob me at the gas station so I can let it all out.
Member
Joined:
Dec 2023
Posts:
11768
EE: 100% (7)
USA
|
Originally Posted By CoyoteGray: I ordered one of these to ry out. https://stincusa.com/product/cam-activated-reset-limiter-for-super-safeties I have three of those. They all eventually worked, but two of them required some TLC. I love them. |
I don't see no Americans. I see trespassers.
|
Originally Posted By EagleArmsHBAR: I'd like AZR to make one for an A2 I have sitting. Roll your own from a 2 position regulator. I’ve almost got the 4 position figured out.  3 rd burst Az regulator forced reset |
Member
Joined:
Jan 2025
Posts:
100
EE: 100% (3)
OH, USA
|
Originally Posted By HKH: Roll your own from a 2 position regulator. I’ve almost got the 4 position figured out.  https://www.youtube.com/shorts/vIVdzZikfpsThink an mbt could be made into 3-position? The lower cam leg is very short; 1/4” maybe. Either a way to make the mbt work 3-pos (probably not yeah?), or allow the mbt azr to work in a normal (or G%?) setup. Edit: after watching the above video, the short side of the lever is not much different than the one you are using. Probably still a little shorter… |
|
Originally Posted By HKH: Roll your own from a 2 position regulator. I've almost got the 4 position figured out. https://www.youtube.com/shorts/vIVdzZikfpsSo you modified a 2 pos. AZR to work with 3 round burst???. And you are working on a 4 position? |
|
Stage 1 was convert 2 position to 3 position Stage 2 was covert the three position to burst Stage 3 I need a part machined down (width) and another part made ) it’s easy just welding involved of two parts). That should solve the riddle, I think. It shoots semi and 3 rd burst (frt mode) with no issues currently.  3rd AZ reg frt |
Member
Joined:
Apr 2022
Posts:
276
EE: 100% (122)
TX, USA
|
You are on the right track. I have it working with the AZR device from AZR-15A1 kit and a mini-Kabuto. Live fire video: https://imgur.com/a/0mH2Ebb Originally Posted By HKH: Stage 1 was convert 2 position to 3 position Stage 2 was covert the three position to burst Stage 3 I need a part machined down (width) and another part made ) it’s easy just welding involved of two parts). That should solve the riddle, I think. It shoots semi and 3 rd burst (frt mode) with no issues currently. https://www.youtube.com/shorts/Kipuj4KcYH0 |
Do you see yourself more as like, a rapist who does magic, or a magician who also likes to rape?
|
Originally Posted By Scrabble001: You are on the right track. I have it working with the AZR device from AZR-15A1 kit and a mini-Kabuto. Live fire video: https://imgur.com/a/0mH2Ebb Hey man! I’ve got your cell from a mutual friend. I need to call you and pick your brain. It will be from a Nashville # - don’t ignore me bro 
|
Member
Joined:
Apr 2022
Posts:
277
EE: 100% (122)
TX, USA
|
A 3-round burst FCG kit can be modded to work with ARC-Fire, SS, AZR, and mini-Kabuto. AZR and mini-Kabuto are easier to work with and require less cutting. I have it running in my SIG MPX Legacy (GEN 1) w/ AZR and a dedicated Colt 9mm AR-9 w/ mini-Kabuto. Live fire video of SIG MPX: https://imgur.com/a/513IVSj |
Do you see yourself more as like, a rapist who does magic, or a magician who also likes to rape?
I was trying to get my AZR 2 position to work with a 3 rnd burst and the very first thing I did was cut the wrong side of the lever . Welp, I may need to buy an MBT now and cut it to work that trigger so It's not wasted.It may not be HKH's fault 
|
Member
Joined:
Apr 2022
Posts:
278
EE: 100% (122)
TX, USA
|
Try to weld or J-B Weld the part you cut (if you still have it). Originally Posted By fulautotank: I was trying to get my AZR 2 position to work with a 3 rnd burst and the very first thing I did was cut the wrong side of the lever . Welp, I may need to buy an MBT now and cut it to work that trigger so It's not wasted.It may not be HKH's fault |
Do you see yourself more as like, a rapist who does magic, or a magician who also likes to rape?
|
Originally Posted By Scrabble001: A 3-round burst FCG kit can be modded to work with ARC-Fire, SS, AZR, and mini-Kabuto. AZR and mini-Kabuto are easier to work with and require less cutting. I have it running in my SIG MPX Legacy (GEN 1) w/ AZR and a dedicated Colt 9mm AR-9 w/ mini-Kabuto. Live fire video of SIG MPX: https://imgur.com/a/513IVSj How are you getting the fourth position of full frt mode Extending the burst disco? |
Member
Joined:
Apr 2022
Posts:
279
EE: 100% (122)
TX, USA
|
When you say extend the burst disco… you mean adding a tail to the 2-hook disconnector from the burst FCG kit? That’s what I did… I welded a tail to it. Think about it… you need to disable 3-round Force Reset in order to have full Force Reset. Originally Posted By HKH: How are you getting the fourth position of full frt mode Extending the burst disco? |
Do you see yourself more as like, a rapist who does magic, or a magician who also likes to rape?
Member
Joined:
Apr 2022
Posts:
280
EE: 100% (122)
TX, USA
|
You can try J-B Weld shims… like cut soda cans to fill the gap. It is only a bandaid fix. Originally Posted By fulautotank: I don't weld and I was grinding the material off so nothing I can replace. |
Do you see yourself more as like, a rapist who does magic, or a magician who also likes to rape?
|
Originally Posted By Scrabble001: You can try J-B Weld shims like cut soda cans to fill the gap. It is only a bandaid fix. |
Member
Joined:
Apr 2022
Posts:
281
EE: 100% (122)
TX, USA
|
You can use a mini-Kabuto as well. Originally Posted By fulautotank: I new I would likely mess it up so I had a backup plan. I will just make it work with an MBT trigger. The lever is still long enough for that. |
Do you see yourself more as like, a rapist who does magic, or a magician who also likes to rape?
Member
Joined:
Dec 2023
Posts:
11835
EE: 100% (7)
USA
AR Sponsor