AR Sponsor
AR Pistol Picture ONLY Thread. (Page 186 of 189)
|
Originally Posted By Citizen904: FM15’s and BRN180s. https://s4.gifyu.com/images/833F4980-1F28-4663-A8CE-F506C077907D.gif Reminds me of this... 
|
|
Originally Posted By grizzlygunner999: So what's the recent intell on pistol brace ruling. Does any one give a shit?/media/mediaFiles/sharedAlbum/idgas_zpsiohwxh7k_GIF-112.gif Might as well rename this the AR SBR forum now. Hopefully law suits get filed and won. |
Joined:
Jan 2023
Posts:
1
EE: 0% (0)
TN, USA
Member
Joined:
Sep 2022
Posts:
250
EE: 100% (1)
USA
Joined:
Apr 2023
Posts:
9
EE: 0% (0)
MO, USA
I think I can safely say this is one of the more pistol-like AR Pistol builds looking through the picture thread. 10" .458 barrel on the Fightlite SCR pistol lower, CMT big-bore smooth-side upper, handguard only goes a bit over an inch past the gas block, and oddly the hardest thing for me was finding a sight I was happy with. A fully shrouded pistol red dot ended up fitting perfectly flush with the front face of the upper and I'm happy with the overall look, and don't have to demount and re-zero the red dot to change the battery. Plenty stable at 25 yards one handed with no sling, but it takes to a single-point sling easily and variations on the Harris flashlight stance or a normal two-handed handgun grip are what I usually end up using. |
|
Originally Posted By WolfWings: I think I can safely say this is one of the more pistol-like AR Pistol builds looking through the picture thread. https://i.imgur.com/jJHRAW0.jpg Awesome job! I'd like to see that set up with some wood furniture. Here is one I keep playing with. DPMS 1/9 barrel, on a Bear Creek side charge upper. Stribog sights, I drilled out the rear aperature. 3 1/2" buffer tube. Works well at 50 yards using the sling.  
|
Joined:
May 2023
Posts:
3
EE: 0% (0)
WI, USA
 Aero Precision lower. Lantac upper. Midwest Industries iron sights with Meprolight tritium rear aperture and truglo tritium front sight post. DFA buffer system. Hughes Ballistics titanium bcg cut down by DFA. WMD bolt. Fortis Handguard. Faxon .458 SOCOM barrel. Griffin minimalist taper mount muzzle brake. 2A Armament gas block. V Seven titanium barrel nut. Titanium safety, titanium mag release. BAD bolt catch. Geissele G2S trigger. 70.44 oz. or 4.4 lbs. Built as a defense gun for back country defense gun for grizzly / moose. I aimed for a weight comparable to a high powered pistol with similar ballistics (.460 S&W, .50AE, .45-70 gov't). She's like shooting a 20 gauge in a pistol form.  I add a Griffin blast shield to easy my ears on the range.
|
|
Originally Posted By gurn-blanston: Awesome job! I'd like to see that set up with some wood furniture. Here is one I keep playing with. DPMS 1/9 barrel, on a Bear Creek side charge upper. Stribog sights, I drilled out the rear aperature. 3 1/2" buffer tube. Works well at 50 yards using the sling. https://i.postimg.cc/tT8Zbhn5/0616231814.jpg https://i.postimg.cc/Xv7ykN0w/0616231815a.jpg Nice touch 
|
Joined:
Apr 2023
Posts:
10
EE: 0% (0)
MO, USA
|
Originally Posted By gurn-blanston: Awesome job! I'd like to see that set up with some wood furniture. Here is one I keep playing with. DPMS 1/9 barrel, on a Bear Creek side charge upper. Stribog sights, I drilled out the rear aperature. 3 1/2" buffer tube. Works well at 50 yards using the sling. I'd love to get a wooden grip at least, I do love that wooden upper/foreend you've got, which one's that if you don't mind me asking? And yeah I pondered getting the Stribog sights, would have had to switch out the free float if I did I think to have a reasonable sight distance, so went with a red dot for a little bit more for now. I might re-visit it with a proper handguard to get a full-length top rail and go with some Stribogs myself though. |
|
Attached File |
If I edited the post above it's more than likely because I suck at typing. If I didn't, I was either in too big of a hurry or just missed it.
A Fencer of the Wood Cut School
Joined:
Jun 2005
Posts:
2503
EE: 100% (1)
NV, USA
|
Attached File Attached File Straight-pull 300 BLK pistol with a 1-6x24 Burris. Forgive the taxi-driver beads. They do work, though. Best, JBR |
"I do not avoid women, Mandrake. But I do deny them my essence."
"Yes... yes. This is a fertile land, and we will thrive. We will rule over all this land, and we will call it... This Land."
"Yes... yes. This is a fertile land, and we will thrive. We will rule over all this land, and we will call it... This Land."
|
Originally Posted By Predfan2001: https://i.imgur.com/2vpv7ep.jpg Who makes and sells this buffer tube cover? |
Freedom grows from blood soaked soil...
Joined:
Jun 2007
Posts:
35680
EE: 0% (0)
TX, USA
|
Attached File I think I finally have it setup exactly how I want it. 300blk PSA 8.5 upper and it eats anything I feed it. |
Because some men aren't looking for anything logical, like money. They can't be bought, bullied, reasoned, or negotiated with. Some men just want to watch the world burn.
 Originally Posted By Hellion-Productions: Slide-action upper from solo300.com 8.5" barrel in .300 BLK, 1/7 twist from Bison Armory KNS rear receiver rail. https://www.AR15.Com/media/mediaFiles/75898/IMG_20201016_130219117_jpg-1641628.JPG https://www.AR15.Com/media/mediaFiles/75898/IMG_20201016_130241016_jpg-1641629.JPG https://www.AR15.Com/media/mediaFiles/75898/IMG_20201016_130417876_jpg-1641630.JPG https://www.AR15.Com/media/mediaFiles/75898/IMG_20201016_130443391_jpg-1641631.JPG Best, JBR @Hellion-Productions I tried to send an instant message but it looks like the Instant Messenger is broken. What's the wait on an order from solo300? Is that compatible with any barrel with a plugged gas port? |
"Evil preaches tolerance until it is dominant, then it tries to silence good."
A Fencer of the Wood Cut School
Joined:
Jun 2005
Posts:
2534
EE: 100% (1)
NV, USA
|
Yes, any barrel can be used. You just have to flip the gas block or make a slipover section of tubing that covers the gas port (I tapped mine and kept itmin place with a set screw). The receiver is not typical, so it won't fit a LaRue free-float rail, so be aware of that issue. I did get your IM. Contact Solo 300 on Instagram. They usually hang there. They used to be active on the larger 300 BLK Facebook groups, too. Best, JBR |
"I do not avoid women, Mandrake. But I do deny them my essence."
"Yes... yes. This is a fertile land, and we will thrive. We will rule over all this land, and we will call it... This Land."
"Yes... yes. This is a fertile land, and we will thrive. We will rule over all this land, and we will call it... This Land."
|
Originally Posted By Hellion-Productions: Yes, any barrel can be used. You just have to flip the gas block or make a slipover section of tubing that covers the gas port (I tapped mine and kept itmin place with a set screw). The receiver is not typical, so it won't fit a LaRue free-float rail, so be aware of that issue. I did get your IM. Contact Solo 300 on Instagram. They usually hang there. They used to be active on the larger 300 BLK Facebook groups, too. Best, JBR Excellent, thanks. This is a great design. |
"Evil preaches tolerance until it is dominant, then it tries to silence good."
|
Originally Posted By TheRiddleOfSteel: Excellent, thanks. This is a great design. Attached File |
A Fencer of the Wood Cut School
Joined:
Jun 2005
Posts:
2535
EE: 100% (1)
NV, USA
|
Originally Posted By Daggertt: Not a pistol but i also enjoy the solo 300. I got one of the initial versions which was a modified standard upper. https://www.ar15.com/media/mediaFiles/435611/20200612_172403_jpg-3018602.JPG Originally Posted By Daggertt: Originally Posted By TheRiddleOfSteel: Excellent, thanks. This is a great design. https://www.ar15.com/media/mediaFiles/435611/20200612_172403_jpg-3018602.JPG That's a handsome piece. Kudos. Best, JBR |
"I do not avoid women, Mandrake. But I do deny them my essence."
"Yes... yes. This is a fertile land, and we will thrive. We will rule over all this land, and we will call it... This Land."
"Yes... yes. This is a fertile land, and we will thrive. We will rule over all this land, and we will call it... This Land."
|
Originally Posted By gurn-blanston: Awesome job! I'd like to see that set up with some wood furniture. Here is one I keep playing with. DPMS 1/9 barrel, on a Bear Creek side charge upper. Stribog sights, I drilled out the rear aperature. 3 1/2" buffer tube. Works well at 50 yards using the sling. https://i.postimg.cc/tT8Zbhn5/0616231814.jpg https://i.postimg.cc/Xv7ykN0w/0616231815a.jpg Gurn-blanston Can full parts list on that? I want one. |
R.I.P. Beau 8-17-2022
|
MONICA!
|
|
Originally Posted By @gogetumnow Curious with the rationale behind going with a straight pull? Is it : 1 Gets you favorable conditions with the law somehow? 2 keeps a closed bolt longer for more quietness? 3 accuracy? Either way nice looking piece and I love the bolt handle. I had a bolt action 300blk rem700 and it was super quiet but i didn't need 16" barrel or all the extra weight. So i started looking into short barrel bolt actions, or building one, and at the time the were no options other than cutting something down, which gets pricey with bolt guns. I decided it was better anyway to just use an ar because i could build it how i wanted without too much trouble and keep an the same ergos and accessories. I tried just installing a gas block upside down to not let it cycle, but there was still gas escaping, which made it louder than the bolt gun. So i was going to buy a carbine gas 300blk barrel to have cut down and then i saw the Solo 300 project and it was everything i wanted, including a chopped down bcg so i could fold the stock. And it's everything i hoped it would be. |
|
Attached File Truck gun... PSA M4 Carbine Lower, PSA premium 10.5" upper, mixture of CMMG with a couple Geissele internal parts thrown in for good measure, KAK Industries original Shockwave Blade brace on a KAK 7075 buffer tube, Colt side sling swivel and a Magpul sling, Olight Odin light on a Kerm-Lock QD mount, now with aSurefire G2X Tactical light. Mil-Spec carry handle rear sight so no optic to worry about getting knocked out of alignment or battery dying. |
"The right to buy weapons is the right to be free"
|
Originally Posted By MoonDancer: Current HD AR with one of my CCW guns. https://www.ar15.com/media/mediaFiles/37420/20231215_133006-3060331.jpg Nice! That's a brace? Where can I get? |
|
Originally Posted By s4s4u: Nice! That's a brace? Where can I get? |
"The right to buy weapons is the right to be free"
|
Budget AR 7.62x39 10.5" Bear Creek Arsenal upper, Superlative Arms adjustable gas block, Palmetto lower, Magpul brace. F1 can and Vortex red/green dot. I took it out this past weekend, it's super quiet. I still need to get a Vickers Tactical sling for it. My wife is getting me an ALG ACT Trigger for Christmas. So far it has been 100% Attached File |
Let's go Brandon!
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
|
Originally Posted By s4s4u: Nice! That's a brace? Where can I get? @MoonDancer @s4s4u I would like to know about that brace too if anyone finds out. |
Let's go Brandon!
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
|
Originally Posted By joeIII223: @MoonDancer @s4s4u I would like to know about that brace too if anyone finds out. ETA: Nevermind |
Let's go Brandon!
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
|
Originally Posted By joeIII223: @MoonDancer @s4s4u I would like to know about that brace too if anyone finds out. Originally Posted By joeIII223: Originally Posted By s4s4u: Nice! That's a brace? Where can I get? @MoonDancer @s4s4u I would like to know about that brace too if anyone finds out. @red_mccloud paging @red_mccloud If Red doesn't respond at all, the N1 Brace on the website joeIII223 found looks just like my brace. |
"The right to buy weapons is the right to be free"
|
Originally Posted By MoonDancer: Found it by searching archived threads finally. Don't know if he's still making these or even if he's still on arfcom. Let's see. @red_mccloud paging @red_mccloud If Red doesn't respond at all, the N1 Brace on the website joeIII223 found looks just like my brace. @MoonDancer @s4s4u The one I found is 3D printed. It also doesn't have the "adjustment lever" |
Let's go Brandon!
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
not joeII, I'm Joe
My grandfather was Joe senior, dad Joe Jr, I'm the third.
So my username is joeIII223
Those are three I's not L's
Thanks @whiskerz @Boomer for helping me clear this up.
|
Originally Posted By joeIII223: @MoonDancer @s4s4u The one I found is 3D printed. It also doesn't have the "adjustment lever" |
"The right to buy weapons is the right to be free"
|
7.62x39, Bear Creek barrel, Bushmaster upper, Spikes Crusader lower. Other than the barrel, i had all of the parts laying around. I didnt have a 7.62x39, so i built one. The lower wears many hats. Attached File |
"You're no daisy! You're no daisy at all. Poor soul, you were just too high strung."
AR Pistol Picture ONLY Thread. (Page 186 of 189)
AR Sponsor