User Panel
User Panel
User Panel
|
Posted: 5/19/2020 7:27:52 AM EDT
[Last Edit: d16man]
This thread is solely for questions on the value of lowers/uppers/parts. If you can offer a logical price value, please do so. Please do not turn this into an argumentative thread or a general discussion thread.
Lancelot and I hope this will be beneficial for this section of the forums. If you have questions please PM one of us. 
|
|
|
|
|
Posted: 5/19/2020 8:07:23 AM EDT
[Last Edit: K1LLD33R]
[#1]
did you even bother reading the post? This isn't GD nor a GD discussion. This is for appraisals and value questions.~d16man
 ETAAs of today, the original source (and other places) of my NOS FN M16A4 upper that came without the bcg/CH is now OOS, picked up last summer and less than 1k rounds of lake city brass or better through it. Only used a bcm CH and mags with a lantac carrier group and always kept it clean. Mostly slow fire use with the SDE to a couple occasions of double tapping through less than a single mag. It consistently cycles 4 o clock with an A5 and it groups on par with every other one that ive ever seen. Swapped out the A2 with a wilson accu-tac and havent touched it since. What is this upper worth now? (as it was sold, excluding the other stuff i had prior) |
|
|
|
|
Posted: 5/19/2020 9:02:38 PM EDT
[#2]
IIRC that upper was between $5-600 new. With 1000 rounds through it, minus bcg and ch its probably a $4-450 upper now. Maybe a little more since we are in a panic time. Keep in mind PSA has an FN CHF upper with a Geissele rail in the $550 range.
|
|
|
|
|
Posted: 6/10/2020 9:14:44 AM EDT
[#3]
I have an almost complete rifle I got from the Remington bankruptcy auctions. OD green factory anodized upper and lower. Lower is Remington marked and made in Huntsville. Barrel is a 5.56 1:8 DPMS marked barrel that does not appear to be chrome lined. Stock is marked Bushmaster. Rifle was missing CH, BCG, and FCG. I've personally never seen another Remington marked OD green reciever set. Rare or just another DPMS wearing a Remington costume?
|
|
|
|
|
Posted: 6/10/2020 9:32:49 AM EDT
[#4]
There's another thread for appraising AK related firearms.
https://www.ar15.com/forums/AK-47/Want-to-know-the-value-of-your-AK-/64-155293/ |
|
|
|
|
Posted: 6/10/2020 10:46:14 AM EDT
[#5]
Quote HistoryOriginally Posted By AKengineer: I have an almost complete rifle I got from the Remington bankruptcy auctions. OD green factory anodized upper and lower. Lower is Remington marked and made in Huntsville. Barrel is a 5.56 1:8 DPMS marked barrel that does not appear to be chrome lined. Stock is marked Bushmaster. Rifle was missing CH, BCG, and FCG. I've personally never seen another Remington marked OD green reciever set. Rare or just another DPMS wearing a Remington costume? Is it marked r15? If so, Remington did a bunch of colors, although most are cerakote. CDNN had them and Bushmaster's on sale for around $500. If it is the anodized, you might could get more as ODG is popular right now. |
|
|
|
|
Posted: 6/10/2020 11:04:36 AM EDT
[#6]
It is marked R-15.
|
|
|
|
PA, USA
|
Posted: 6/10/2020 11:39:35 AM EDT
[#7]
Quote HistoryOriginally Posted By AKengineer: I have an almost complete rifle I got from the Remington bankruptcy auctions. OD green factory anodized upper and lower. Lower is Remington marked and made in Huntsville. Barrel is a 5.56 1:8 DPMS marked barrel that does not appear to be chrome lined. Stock is marked Bushmaster. Rifle was missing CH, BCG, and FCG. I've personally never seen another Remington marked OD green reciever set. Rare or just another DPMS wearing a Remington costume? Not adonized. Cerakoted and assembled from random parts by CDNN. |
|
|
|
Posted: 6/10/2020 11:57:21 AM EDT
[#8]
Quote HistoryOriginally Posted By d16man: Is it marked r15? If so, Remington did a bunch of colors, although most are cerakote. CDNN had them and Bushmaster's on sale for around $500. If it is the anodized, you might could get more as ODG is popular right now. Quote HistoryOriginally Posted By d16man: Originally Posted By AKengineer: I have an almost complete rifle I got from the Remington bankruptcy auctions. OD green factory anodized upper and lower. Lower is Remington marked and made in Huntsville. Barrel is a 5.56 1:8 DPMS marked barrel that does not appear to be chrome lined. Stock is marked Bushmaster. Rifle was missing CH, BCG, and FCG. I've personally never seen another Remington marked OD green reciever set. Rare or just another DPMS wearing a Remington costume? Is it marked r15? If so, Remington did a bunch of colors, although most are cerakote. CDNN had them and Bushmaster's on sale for around $500. If it is the anodized, you might could get more as ODG is popular right now. The item @AKengineer purchased was about $290 from CDNN at the beginning of this year. Rare not really. I wouldn’t value it at $500 either unless someone really wanted it. |
|
|
|
|
Posted: 6/10/2020 5:15:19 PM EDT
[#9]
Quote HistoryOriginally Posted By InsaneAuto86: Not adonized. Cerakoted and assembled from random parts by CDNN. Interesting. So CDNN's stuff on gunbroker was all parts bin specials? Too bad I never saw some of that stuff on the shelf when it was produced. |
|
|
|
|
Posted: 6/11/2020 1:41:12 PM EDT
[Last Edit: Alacrity]
[#10]
Have a fair amount of earlier Colt stuff. Any premium on stuff like this?
 Attached File Attached File Attached FileTIA |
|
|
|
ID, USA
|
Posted: 6/13/2020 12:26:52 AM EDT
[Last Edit: ChrisinIdaho]
[#11]
This one should be pretty basic I would imagine. This is a 6920 OEM1 that I bought new in August 2019 from Arms Unlimited, added a "colt furniture kit" from cdnn, a surplus carry handle, and swapped the barrel for a new Colt 14.5 with pinned & welded A2X. About 500 rounds fired. Any idea what a fair price would be in the current climate?
ETA it has cage code throughout, QR code on the side of the lower, and the barrel is NOS with a C MP. 
|
|
|
|
Posted: 6/13/2020 10:59:49 PM EDT
[#12]
Quote HistoryOriginally Posted By ChrisinIdaho: This one should be pretty basic I would imagine. This is a 6920 OEM1 that I bought new in August 2019 from Arms Unlimited, added a "colt furniture kit" from cdnn, a surplus carry handle, and swapped the barrel for a new Colt 14.5 with pinned & welded A2X. About 500 rounds fired. Any idea what a fair price would be in the current climate? ETA it has cage code throughout, QR code on the side of the lower, and the barrel is NOS with a C MP. https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/002008303279/media/1669300236649901/medium/1592019424/enhance Run of the mill AR's go for about 80% values. You could probably find someone who wants a for sure "Colt", but a hard sale to folks that shop at PSA or build their own. What total do you have in it? Do you still have the other barrel and furniture? |
|
|
|
ID, USA
|
Posted: 6/14/2020 2:22:47 AM EDT
[#13]
Quote HistoryOriginally Posted By d16man: Run of the mill AR's go for about 80% values. You could probably find someone who wants a for sure "Colt", but a hard sale to folks that shop at PSA or build their own. What total do you have in it? Do you still have the other barrel and furniture? Thanks for answering. Since it was an OEM1 there was no furniture, and I sold the 16" barrel on the EE to help pay for the 14.5". I think I'm probably into it $900 or so. I'll probably keep it for at least a while, just like to have an idea what's fair in case an offer comes along or I suddenly want to fund something else. |
|
|
|
Posted: 6/15/2020 8:41:54 AM EDT
[#14]
Quote HistoryOriginally Posted By ChrisinIdaho: Thanks for answering. Since it was an OEM1 there was no furniture, and I sold the 16" barrel on the EE to help pay for the 14.5". I think I'm probably into it $900 or so. I'll probably keep it for at least a while, just like to have an idea what's fair in case an offer comes along or I suddenly want to fund something else. Quote HistoryOriginally Posted By ChrisinIdaho: Originally Posted By d16man: Run of the mill AR's go for about 80% values. You could probably find someone who wants a for sure "Colt", but a hard sale to folks that shop at PSA or build their own. What total do you have in it? Do you still have the other barrel and furniture? Thanks for answering. Since it was an OEM1 there was no furniture, and I sold the 16" barrel on the EE to help pay for the 14.5". I think I'm probably into it $900 or so. I'll probably keep it for at least a while, just like to have an idea what's fair in case an offer comes along or I suddenly want to fund something else. If Joe wins it will be worth 2500..... |
|
|
|
|
Posted: 6/22/2020 12:50:05 PM EDT
[#15]
Quote HistoryOriginally Posted By Alacrity: Have a fair amount of earlier Colt stuff. Any premium on stuff like this? https://www.AR15.Com/media/mediaFiles/14291/038DC154-3E10-435E-938F-8A97057B9641_jpe-1457097.JPG https://www.AR15.Com/media/mediaFiles/14291/A2941E5C-7BED-4775-B9FD-6147309C6424_jpe-1457095.JPG https://www.AR15.Com/media/mediaFiles/14291/2BEB510F-095E-4F59-A1A6-1E14B4A2B4B2_jpe-1457098.JPG TIA Evidently they are worth 2/3 of a LMT Enhanced BCG to the right person |
|
|
|
CO, USA
|
Posted: 6/30/2020 1:18:23 PM EDT
[#16]
I have a couple Colt AR15s I bough new years ago and never fired but wondering what the value might be. It is a pair of consecutive serial number Colt model 6520s with "blue" labels on the box. I saw elsewhere a reference to "green" labels.
Any ideas on value for the set? I was told some time ago that consecutive s/n Colts were relatively hard to find. Both are NIB with all accessories and unfired. |
|
|
|
Posted: 7/1/2020 6:01:26 PM EDT
[Last Edit: NorthPolar]
[#17]
...
|
|
|
|
|
Posted: 7/1/2020 6:07:52 PM EDT
[#18]
How about my Preban colt. It has an aftermarket trigger, I believe a Jewell. No box or anything, just the gun. It's in very good condition.
|
|
|
|
MP, USA
|
Posted: 7/3/2020 12:36:10 AM EDT
[#19]
Quote HistoryOriginally Posted By NCCobra: How about my Preban colt. It has an aftermarket trigger, I believe a Jewell. No box or anything, just the gun. It's in very good condition. https://live.staticflickr.com/65535/48572874257_04397f1be1_b.jpg A couple have closed at around $1700 on Gunbroker recently. |
|
|
USA
|
Posted: 7/8/2020 1:45:07 PM EDT
[Last Edit: lok993]
[#20]
Ok, I have a Diemaco 11.5 inch 6933 upper. Its used but in good condition with no abnormal wear. Upper is Anchor Harvey and Diemaco "D" stamped. Barrel has standard C MP CB markings. It has a complete Diemaco BCG as well, Diemaco D stamp on the carrier and MPI on the bolt. I believe this upper was always meant for the US so I am probably 90 percent sure its got a standard Colt US barrel and not a Canadian CHF.
So anyone have any idea on potential value? It is at all rare or desirable, more than a standard US colt upper or just a slightly unique oddity. Is this worth keeping over say a similar US Colt 6933 upper or something like that? |
|
|
|
Posted: 7/11/2020 8:08:16 AM EDT
[#21]
Built up an 11.5" upper with a Geissele Mk4 Federal rail. Thinking I want to move it to help fund other projects. What would be a reasonable asking price for this build list?
- Colt CAGE code upper - LMT Enhanced F/A BCG - Colt 11.5" 'HRT' profile barrel - SF Closed Tine Warcomp - Geissele Federal Mk 4, ODG, Gen 1 (short bottom rail) - Geissele ODG Airborne CH - Barrel dimpled, FSB cut down to lo-pro gas block, and upper assembled by Marvin Pitts of Nefarious Arms Probably 250ish rounds on it, all told? Pics for attention:  Attached File |
|
|
|
|
Posted: 7/11/2020 8:27:42 AM EDT
[#22]
Quote HistoryOriginally Posted By oldbrowndog: Built up an 11.5" upper with a Geissele Mk4 Federal rail. Thinking I want to move it to help fund other projects. What would be a reasonable asking price for this build list? - Colt CAGE code upper - LMT Enhanced F/A BCG - Colt 11.5" 'HRT' profile barrel - SF Closed Tine Warcomp - Geissele Federal Mk 4, ODG, Gen 1 (short bottom rail) - Geissele ODG Airborne CH - Barrel dimpled, FSB cut down to lo-pro gas block, and upper assembled by Marvin Pitts of Nefarious Arms Probably 250ish rounds on it, all told? Pics for attention: https://www.AR15.Com/media/mediaFiles/432480/yiPZYWz_jpg-1498884.JPG A clone builder will want that for the rail and the CH. Maybe $700-800, possibly a little more. |
|
|
|
WI, USA
|
Posted: 7/14/2020 7:12:46 AM EDT
[Last Edit: MadBodhi]
[#23]
I have a Noveske Gen 2 lower, never built on, not a chainsaw. Ideas on value ?I can find Gen 3' s on GunBroker occasionally but I don't believe the forged Gen 2 was in production very long as it seems to be rather rare.
|
|
|
|
Posted: 7/16/2020 10:42:00 AM EDT
[#24]
I have a Cav Arms (pre Cav Aid) fully assembled lower with a Stag USGI trigger type LPK. It has been sitting in my safe for years. It has A2 buttplate assembly. I would have to check to see if it is a plastic door or aluminum. Any idea on value? I have no pictures, but it's just a regular black Cav Arms lower.
|
|
|
|
MO, USA
|
Posted: 7/21/2020 3:53:15 PM EDT
[#25]
Anyone have an idea what my rifle is worth?
16'' Rock River Arms. Bought about 10 years ago, my first AR. Less than 1000 rounds down the pipe. 9" standard handguards. Could include a Vortex Sparc red dot or not. |
|
|
TX, USA
|
Posted: 7/25/2020 8:28:20 PM EDT
[#26]
I have a Noveske Gen 1 complete lower, SN 009xx, standard FCG, 6 position buffer tube, Vltor Modstock Clubfoot stock. Excellent condition.
What is a price on this? Thanks |
|
|
|
Posted: 7/25/2020 11:07:32 PM EDT
[#27]
Quote HistoryOriginally Posted By jrh3: I have a Noveske Gen 1 complete lower, SN 009xx, standard FCG, 6 position buffer tube, Vltor Modstock Clubfoot stock. Excellent condition. What is a price on this? Thanks Iirc, Noveske stripped lowers go for 185. Probably closer to $3-350 with it being complete. Wait until October and it will be $500. |
|
|
|
|
Posted: 7/27/2020 10:16:24 AM EDT
[Last Edit: TGWLDR]
[#28]
Quote HistoryOriginally Posted By oldbrowndog: Built up an 11.5" upper with a Geissele Mk4 Federal rail. Thinking I want to move it to help fund other projects. What would be a reasonable asking price for this build list? - Colt CAGE code upper - LMT Enhanced F/A BCG - Colt 11.5" 'HRT' profile barrel - SF Closed Tine Warcomp - Geissele Federal Mk 4, ODG, Gen 1 (short bottom rail) - Geissele ODG Airborne CH - Barrel dimpled, FSB cut down to lo-pro gas block, and upper assembled by Marvin Pitts of Nefarious Arms Probably 250ish rounds on it, all told? Pics for attention: https://www.AR15.Com/media/mediaFiles/432480/yiPZYWz_jpg-1498884.JPG Closer to $12-$1400 with the right buyer. FBI clone builder will definitely pay more and that dimpled bbl is the cherry on top. Eta: I am in no way an expert on valuation. Just running a mental tally of components new vs EE history. |
|
|
|
|
Posted: 7/27/2020 10:23:24 AM EDT
[#29]
Quote HistoryOriginally Posted By JoshNC: A couple have closed at around $1700 on Gunbroker recently. Quote HistoryOriginally Posted By JoshNC: Originally Posted By NCCobra: How about my Preban colt. It has an aftermarket trigger, I believe a Jewell. No box or anything, just the gun. It's in very good condition. https://live.staticflickr.com/65535/48572874257_04397f1be1_b.jpg A couple have closed at around $1700 on Gunbroker recently. Hell, the lower alone could bring $1-$1300 in a ban state. |
|
|
|
|
Posted: 7/27/2020 10:27:22 AM EDT
[#30]
Quote HistoryOriginally Posted By lok993: Ok, I have a Diemaco 11.5 inch 6933 upper. Its used but in good condition with no abnormal wear. Upper is Anchor Harvey and Diemaco "D" stamped. Barrel has standard C MP CB markings. It has a complete Diemaco BCG as well, Diemaco D stamp on the carrier and MPI on the bolt. I believe this upper was always meant for the US so I am probably 90 percent sure its got a standard Colt US barrel and not a Canadian CHF. So anyone have any idea on potential value? It is at all rare or desirable, more than a standard US colt upper or just a slightly unique oddity. Is this worth keeping over say a similar US Colt 6933 upper or something like that? A bit more (to the right buyer) than it's Colt counterpart due to the unique forge mark. If bbl is D stamped, value jumps. |
|
|
|
IN, USA
|
Posted: 8/5/2020 7:58:22 PM EDT
[#31]
What would be considered current market value on a pre-94 Colt Sporter A2 slabside.
Has the Colt marked sear block installed. Less than 250 or so rounds thru it, I guess I'd call it an easy 96%. Thanks, ReSS |
|
|
TN, USA
|
Posted: 8/7/2020 9:54:09 PM EDT
[#32]
How much can one expect to pay for a genuine Colt 2 position buffer tube?
|
|
|
|
Posted: 8/8/2020 1:28:16 AM EDT
[Last Edit: M4]
[#33]
What's a DD MK18 upper worth, with 500 rounds through it, in very good shape, minus the BCG?
Like this one minus the rail panels.... |
|
|
|
VA, USA
|
Posted: 8/10/2020 10:41:53 AM EDT
[Last Edit: FrankSL]
[#34]
Geissele Mk1, Mod 0 13" SMR handguard. (13", not the 10" pictured)
 |
|
|
|
Posted: 8/13/2020 9:51:19 AM EDT
[#35]
Quote HistoryOriginally Posted By FrankSL: Geissele Mk1, Mod 0 13" SMR handguard. (13", not the 10" pictured) https://i.imgur.com/0kVC0mn.jpg To the right buyer....$450. What city is marked on it? |
|
|
|
|
Posted: 8/15/2020 6:10:46 PM EDT
[#36]
I have an HK91 and HK93 that were my father's. He died in 1992 so I would assume these are 1980's or older. I have no clue but just looking for a ball park figure on them as I am looking to sell. I am currently out of town or I would post pics. They have been safe queens that I take out to clean every few years just to get the dust off of them.
|
|
|
|
USA
|
Posted: 8/24/2020 5:37:00 PM EDT
[#37]
Hello. Needing a little help with a Knights Armament SR-15 E3 Mod 2 complete upper that I’m considering selling. It has 600 rounds and is in excellent condition. No scratches, dents, never dropped. It really does look new minus the minor wear on the bcg.
What price would you sell this in the current market and is there a market for it at this time? Thank you!!! |
|
|
|
Posted: 8/24/2020 5:42:53 PM EDT
[#38]
|
|
|
|
WA, USA
|
Posted: 8/25/2020 6:17:48 PM EDT
[Last Edit: Mr_Wrong]
[#39]
Howdy. Looking for the value of an upper comprised of the following:
Anchor Harvey upper receiver Colt 11.5" hrt heavy profile barrel SilencerCo ASE flash hider Daniel Defense fsp 9.5" lite rail Its got a coat of krylon. About 500 rounds through it. Runs just fine. https://imgur.com/a/eNxen5h Thanks ya'll |
|
|
|
Posted: 9/8/2020 8:16:25 PM EDT
[Last Edit: d16man]
[#40]
Quote HistoryOriginally Posted By Burnsome-: How about a Bushmaster/Sendra full auto? https://www.AR15.Com/media/mediaFiles/17185/SENDRA_1_JPG-1560771.JPG @Burnsome- have you tried the NFA forums? |
|
|
|
|
Posted: 9/8/2020 8:48:24 PM EDT
[#41]
Quote HistoryOriginally Posted By d16man: @Burnsome- have you tried the NFA forums? I have looked for sure. Have a current offer so all is good! Thanks! |
|
|
|
USA
|
Posted: 9/16/2020 1:42:17 PM EDT
[Last Edit: GoPack12]
[#42]
Deleted
|
|
|
|
Posted: 9/17/2020 2:33:28 PM EDT
[#43]
I've got a Colt Match Target HBAR lower, serial number CMH032xxx. It looks to be an older A2 forging but I don't believe that it is pre-ban. Hogue grip, foliage VLTOR IMOD stock. Any ideas on value?
|
|
|
|
FL, USA
|
Posted: 9/18/2020 3:21:13 AM EDT
[#44]
I have a late 2019 DD MK18 Upper in FDE. It has the caliber on side and and laser engraved MK18. Upper is stripped and has less than 500rds through it. Any idea what it is worth? Like new condition from safe queen.
|
|
|
|
Posted: 9/20/2020 12:10:10 PM EDT
[Last Edit: Riley1980]
[#45]
Gentleman, I have a Aero Precision “patriot” .308 lower with an American flag roll mark, and model # 4JULY1776, I’m curious what a fair price for these would be?
I also have an unfired PSA 7.62x39 complete upper with BCG and CH, (16”, carbine length, M4 cut).. I am wondering what a fair price would be on that as well. Thanks!  |
|
|
|
|
Posted: 9/27/2020 9:21:13 PM EDT
[#46]
I got this in a trade deal. looks like an older upper on a newer lower. since the finish doesn't match. it came with the ET Cetera 37mm launcher and a bunch of smoke cartridges. It looks like if I take off the launcher off it would take a early triangular handguard. I know the handgrip is after market. What is it & how much to ask for it. Should I seperate the gun from the launcher to sell. Thanks for any info you can give me.
     |
|
|
|
TN, USA
|
Posted: 10/19/2020 3:27:21 PM EDT
[#47]
Times are tough, so I'm considering parting with a rare Colt MT6851DC 20" HBAR Conversion Upper, but unsure of pricing to list it. Comes with the original Colt Bolt & Colt/BSquare flat top scope mount. Also have 3x 20rd Factory Colt converted 7.62 Mags(now 5rd capacity, 7.62 followers and floor plates) and one factory 5 rd with the plastic bottom section and 2 Frankenmags. Will be adding back regular handguards, but left off for pictures of markings. I do not have the box or manual.
      
|
|
|
FL, USA
|
Posted: 11/4/2020 8:06:39 PM EDT
[Last Edit: indreams1984]
[#48]
I picked this up in a trade but don't know much about the Colt 6520 values, especially older ones. It came from a retired gun dealer who states it was never fired and this appears true. It is a blue label, 1:7 barrel, and does have the sear block, etc. Definitely like the looks of it vs the later editions. Thanks for any input!
 8853EA9D-5B6F-4AB0-96A7-739B8587ACCF by m b, on Flickr" /> DE13FB77-3D07-425D-8529-93CFA950DD4A by m b, on Flickr 3BAB9F57-FE63-4243-81B8-058D9571B13E by m b, on Flickr
|
|
|
|
Posted: 11/27/2020 11:27:46 AM EDT
[#49]
Just traded into a Colt Carbine with a 16" 1/9 twists HBAR barrel.Let's just say that it's not going to work for what I have intended for this carbine. So I can either trade it off or sell it and buy what I need - if I can find it in stock!
|
|
|
|
|
Posted: 11/29/2020 8:49:09 AM EDT
[#50]
I have a semi complete Gen2 Aero lower (needs takedown pins and reciever extension) and an M4E1 complete lower. Wanting to inquire about a current market fair price to ask?
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
