AR Sponsor
Official Appraisal and what is this worth? Thread (Page 2 of 3)
| My bad, he dropped the price to 1500, with original scope, cheekpeice, extra mags, (no, I don't know what or how many, but as cheap as mags are right now, it's probably net zero increase), and hard case, does that sound reasonable? I am trying to figure out if I want to take out a loan... |
|
Originally Posted By armoredman: My bad, he dropped the price to 1500, with original scope, cheekpeice, extra mags, (no, I don't know what or how many, but as cheap as mags are right now, it's probably net zero increase), and hard case, does that sound reasonable? I am trying to figure out if I want to take out a loan... I'd be all over it for that, go look on Gunbroker for what Colt Delta HBAR are selling for then imagine what they will be selling for in 5 to 10 years. |
WTB : KAC FF M4 RAS P/N 20208
|
Originally Posted By HipSh0T: I'd be all over it for that, go look on Gunbroker for what Colt Delta HBAR are selling for then imagine what they will be selling for in 5 to 10 years. Was there additional stampings for the Delta or just that cloisonné on the grips to ID it? One is gone and the other worn, wasn't sure if I was seeing things right. BTW, thank you very much for the help. |
|
Originally Posted By armoredman: Was there additional stampings for the Delta or just that cloisonné on the grips to ID it? One is gone and the other worn, wasn't sure if I was seeing things right. BTW, thank you very much for the help. Originally Posted By armoredman: Originally Posted By HipSh0T: I'd be all over it for that, go look on Gunbroker for what Colt Delta HBAR are selling for then imagine what they will be selling for in 5 to 10 years. Was there additional stampings for the Delta or just that cloisonné on the grips to ID it? One is gone and the other worn, wasn't sure if I was seeing things right. BTW, thank you very much for the help.  The Colt AR-15A2 DELTA HBAR |
WTB : KAC FF M4 RAS P/N 20208
|
What is it worth? About 400 rounds fired. Clean, no big scratches or dings etc. A3 Upper Tactical Machining Lower Wilson Arms 20" Stainless 223 Wylde Bull Barrel - 1/2-28 TPI Rifle length gas system JP Enterprises Large-Profile Compensator Young National Match BCG Magpul PRS Stock - Rifle length buffer tube and rifle buffer Midwest Industries Gen 2 SS-Series Free Float Rifle Length Handguard PRI Low Profile .936 gas block Larue MBT Trigger Attached File |
I’ve seen things you people wouldn’t believe
Joined:
May 2001
Posts:
40264
EE: 100% (6)
AZ, USA
|
Posted this in the retro forum topic as well, not sure which gets more views. Interested in the value of a Colt R6550 Govt Model with bayo lug. Basically NIB but without the box or accessories and appears to be unfired other than from the factory Thanks |
You can’t have no idea how little I care
Joined:
Dec 2022
Posts:
6
EE: 0% (0)
TX, USA
|
I know that I’m in the wrong area to get an appraisal, but if someone could tell me where to go I’d appreciate it. (“Go to hell” not being the preferred location). I have an AK that’s an NFA item, where on the forum can I got to get an idea of it’s worth? Thanks in advance and sorry for posting in the wrong area, but I can’t find an area to post the question. Never mind, I think that I found the right area. |
|
Originally Posted By Paradude54: I know that I’m in the wrong area to get an appraisal, but if someone could tell me where to go I’d appreciate it. (“Go to hell” not being the preferred location). I have an AK that’s an NFA item, where on the forum can I got to get an idea of it’s worth? Thanks in advance and sorry for posting in the wrong area, but I can’t find an area to post the question. Never mind, I think that I found the right area. Click on the AK forum under the AR and go to AK Discussions |
Joined:
Jan 2023
Posts:
2
EE: 0% (0)
TX, USA
|
I do believe i am ready to part with my KAC SR-15 E3 Mod 1. I have a few other AR's and this gun could fund several other builds for me. Now here is the problem, i am having trouble putting a dollar figure on this weapon. I have checked many sites such as Gunbroker and so-on. I have had no luck. Anyone out there that could give me a hand setting a price on this? I can post a few pics if needed. |
|
Appreciate some help estimating the current value of the following MK12 Mod 1 near clone rifle and scope. Rifle is used with a low round count and both the rifle and scope have been rattle canned. Rifle was assembled by High Caliber Sales with the following components: Lower Receiver Lower Receiver: Colt LE Lower Stock: B5 Stock Tube: Colt Spring/Buffer: Colt spring w/ H2 buffer Grip: Ergo Trigger: Geissele SSA/SSA-E Trigger Guard: GI Upper Receiver Upper Receiver: Colt square/BAFE Barrel: Douglas 18” 1/7 Twist Stainless Steel w/ Ops Inc Profile Gas Block: Badger Ordinance Mk12 gas block Muzzle Device: Ops Inc/Allen Engineering Muzzle Brake w/ Long Collar Hand Guard: Knights URX4 p/n: 81885-1800 Bolt Carrier Group: Colt Charging Handle: PRI Gas Buster Military Latch Optic: Nightforce NXS 2.5-10x32 ZS MOAR Recital Scope Mount: Nightforce Scope Rings Bipod: Harris BRM |
Joined:
Jan 2023
Posts:
1
EE: 0% (0)
FL, USA
Member
Joined:
Feb 2022
Posts:
25
EE: 100% (11)
TN, USA
|
Whats my limited edition Bushmaster worth? Its a 1 or 1500(i think) 2008 30th anniversary. Great shape, not fired much. The whole upper appears to be made by Yankee Hill. Has CAA bipod and Surefire light. cant attach a pic, no option to upload from my PC. |
|
I am in the market for a Colt LE6920 lower receiver. I can get a complete rifle for $800, without furniture. What would the upper only be worth? I am thinking I could sell it & keep the complete lower. The upper in question is at the Colt link below for reference. Colt LE6920 no furniture |
|
Flat Top Bushmaster Dissipator A3 Value Price Range Bought it in the mid 90's. Probably 3-500 rounds through it. I'd describe it as in excellent condition. Just looking for a price range to ask for it on the used market. I remember they were fairly desirable back in the day. Not trying to get rich but I don't want to sell it way below it's value! Thanks for any advice, I appreciate the help! |
| I stopped by a local place looking for something and a gun on the used rack caught my eye. It's not the typical setup I'd go with, but it seems like it may be worth it. LMT Defender 2000 lower, CMC trigger, ACS stock, unknown flat top upper, rifle length system with heavy barrel w/fixed sight), Surefire 3 prong. Asking 700. So about 750 after tax. is it worth it? |
Joined:
Jun 2023
Posts:
1
EE: 0% (0)
AZ, USA
Hello all. I recently inherited this Colt Match Target HBAR CMH0025xx. The stock upper (A2?) has a non-removable handle, no bayonet lug, 20" chrome lined barrel stamped C MP NATO 5.56 1:7. It came with this other upper that has a 24" barrel stamped NATO 5.56 1:8 SS, it has a Burris PEPR mount and a Weaver scope. Lower is stamped Match Target, Match HBAR, Cal .223. The best I've found is a competition HBAR and there was a special package sold in the early 90s that included this 24" barrel. Never going to sell it but I'm curious of it's origins and value. I can't find anything online about a 2 upper package Colt sold.
|
|
What do you think the value of this would be? I have no clue what the hell happened to the anodizing in the 2nd pic. Attached File Attached File Attached File |
Change is the only constant. - Heractilus
Joined:
Jan 2023
Posts:
237
EE: 100% (59)
PA, USA
|
What's the approximate resale value on a Gen 1 Noveke? Looking at one on another forum for local sales in my area and wondering if it's a good deal or not. Link to the posting: https://www.theoutdoorstrader.com/threads/fs-ft-noveske-300-blk.3283044/ |
Joined:
Nov 2023
Posts:
1
EE: 0% (0)
KY, USA
|
https://imgur.com/a/ozdIkd6 It's a Noveske N4...but beyond that I know nothing. Hard to see, but it does have the Magpul Pro offset sights. Any idea on value or even specifics on the generation would be helpful. Thanks! |
|
Looking to sell a Colt LE6920 with restricted roll mark. Like new condition with only 250 rounds fired. 2004 production with original blue label box, plastic bag, 2 20 round Colt mags, sling, and cleaning rod. I've seen a lot of differing opinions on the value and am unsure where to start that is fair. Thanks. |
|
Okay this thread truly seems dead but anyhow, here goes... LE-marked LE6920, built from a lower that was modified for a Ciener-style belt-feed device by Slide Fire Solutions, when they were in business. Both receivers are Cerro forge, flat-top A4 roll-marked upper w/ crisp white T-marks, fat-style handguards, carbine-length 16" government profile barrel & 'C MP' mark. New C-marked BCG & CH, black greened-fray M16A1-style silent sling, Cardinal Forge purpled carry handle to boot along with 2 30rd Colt-stamped '11 date-coded mags. Would it reasonable to ask for $2k, considering some LE-marked 6920s are asking at or over $3k on GB, and mine is modified to accept the Ciener-style unit? |
|
I will give this old thread a shot also - What is reasonable price range for this Colt M4 Carbine? Purchased new in October 2015. Came with Magpul Atacs camo furniture. Now has Colt 14.5” barrel (not SOCOM) with professionally pinned/welded flashhider. Has ACT trigger, BCM gunfighter charging handle. LE serial number prefix, Picatinny rear sight. Upper receiver marked with “C” and keyhole. Lower receiver rollmarked with “M4 CARBINE CAL 5.56MM”. Barrel marked “C MP. 5.56 NATO 1/7”. Original box with unopened accessory bag (colt gun lock, instruction manual), one Atacs camo matching magpul magazine. I appreciate any insight from this group. Attached File Attached File Attached File Attached File Attached File |
|
I was going through a bunch of my older stuff and came across a NIB Knights Armament M5 I had stashed away. The values are all over the place ($300-500) and they are out of stock. So, what would this fetch on EE? I'm not sure I even want to sell because I've always wanted to build a 20" A4. Thank you 
|
|
Originally Posted By RTOinIraq: I was going through a bunch of my older stuff and came across a NIB Knights Armament M5 I had stashed away. The values are all over the place ($300-500) and they are out of stock. So, what would this fetch on EE? I'm not sure I even want to sell because I've always wanted to build a 20" A4. Thank you https://i.postimg.cc/5NdyRk8t/20240527-195422.jpg $350 to $400 is where they tend to sell on Gunbroker. |
|
Hi, I have a cousin looking to sell a rifle he had built by a local ‘smith. Can you guys help with a ball park price he should ask for it for a private sale? Spikes lower with a standard lower parts kit and Magpul stock and pistol grip. The upper has a Green River barrel and a free float hand guard that I don’t recognize. The bolt is an Anderson. I don’t know who made the muzzle brake. It has a UTH forward grip. Not sure who made the sights. He paid a lot of money for it. At least $1300. Attached File Attached File Attached File Attached File Attached File |
|
Originally Posted By steve88GT: Hi, I have a cousin looking to sell a rifle he had built by a local ‘smith. Can you guys help with a ball park price he should ask for it for a private sale? Spikes lower with a standard lower parts kit and Magpul stock and pistol grip. The upper has a Green River barrel and a free float hand guard that I don’t recognize. The bolt is an Anderson. I don’t know who made the muzzle brake. It has a UTH forward grip. Not sure who made the sights. He paid a lot of money for it. At least $1300. https://www.ar15.com/media/mediaFiles/138987/970520469157045429_jpeg-3272022.JPG https://www.ar15.com/media/mediaFiles/138987/1487068462967536880_jpeg-3272024.JPG https://www.ar15.com/media/mediaFiles/138987/2436924607209972206_jpeg-3272025.JPG https://www.ar15.com/media/mediaFiles/138987/3541641199421064987_jpeg-3272026.JPG https://www.ar15.com/media/mediaFiles/138987/2925330012944098614_1__jpeg-3272027.JPG I've sold a couple new milspec Andersons lately for $350. With the added Spikes lower and Magpul, he might get $450-500. This is not a sellers market. |
I'm not always a dick, just kidding, go fuck yourself.
|
Approximate worth of an AR built up with quite a bit of LaRue parts. Stripped upper/lower- LaRue 1st gen UBR MBT-2S trigger LaRue SAT rail DD 16" chrome lined barrel 1-7" It is the pictured rifle, but will be removing the ACOG and back up sights. Upper/lower reciever and rail ceracoated SIG dark grey. Very low round count. Maybe 200 rounds. Had a couple of pmags ceracoated to match. I think 3 or 4. 
|
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
Sic semper evello mortem tyrannis
Sic semper evello mortem tyrannis
Joined:
Dec 2024
Posts:
1
EE: 0% (0)
TX, USA
| Came into a LWRC REPR Mk2 .308 16" Spiral fluted barrel in a trade. It's unfired and with the factory CA compliance takedown pin. MSRP looks like $4500 ish, but I'm not sure what the street price is. Any thoughts on current resale value? Just got hit with a big bill to fix my HVAC and I really don't need to add another caliber to the arsenal right now. |
Official Appraisal and what is this worth? Thread (Page 2 of 3)
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter