AR Sponsor
The parts have been laying around and I finally had a little free time to put it all together today. Larue upper (Denny's version with the feed ramps) 16" Operator barrel w/ Larue gas block Larue 12" rail Leupold 3.5-10x40 w/ illuminated mil-dot reticle Troy front and rear sights AAC M4-2k7 can Magpul MIAD grip and PRS stock Mag and scope refinished using Duracoat "Magpul Flat Dark Earth" |
Balance is good even with the can, although the overall rifle is a little heavier than I'd like. I don't have a scale but I'd guess it's pushing 10 pounds with the can attached and a loaded 20rd mag inserted. |
|
Stage 1-Order Products I just ordered a 16" Operator barrel, Daniel Defense 9 lite, LaRue BUIS, KNS anti walk pins, and trigger guard from Denny's/GTS today. I should be posting a pic or two in a couple of days once it comes in. I CANNOT WAIT TO GET IT ON!! Stage 2-Receive Products  I ordered this stuff on Monday morning and got it Wednesday afternoon. AWESOME service!! More pics to come once all this is installed. THANKS GTS!!!! |
|
I just built my first AR and everything but the lower and the sling came from Denny. Great service and an awesome product! http://lh3.ggpht.com/ashlawson/SGqAeZOPgLI/AAAAAAAAABY/R30XM2GadUU/Left.jpg http://lh3.ggpht.com/ashlawson/SGqAe_B1n7I/AAAAAAAAABo/SDL1qwoN1lc/Right.jpg http://lh6.ggpht.com/ashlawson/SGqAep99BcI/AAAAAAAAABg/o42aDrmSys8/Rail.jpg Lower: -LMT Complete Lower w/Ergo Grip & SOPMOD Stock -LMT 2-Stage Match Trigger Upper: -Denny's 16" Mid-Length 5.56 OPERATOR barrel -Yankee Hill 5C1 Flash Suppressor -CMT Upper Receiver w/M4 cuts -LMT F/A Bolt Carrier Group -CMT Charing Handle w/Pri-Tac Latch -Daniel Defense Omega 9 Rail System -Magpul Handguards & Ladders -BOBRO QD Vertical Grip -LMT Rear Sight -Larue Tactical VTAC 2-point Sling -SS |
|
http://i81.photobucket.com/albums/j214/CptKaos/newriflecopy.jpg Spikes SL 15 lower WOA upper Dennys 16" SS 1 in 7 recon barrel Dennys Super Duty BCG Smith Vortex flash hider Troy low pro gas block WOA LPK w/worked over RRA NM trigger JP V-TAC float tube Ace SOCOM stock Magpul MOE grip Leupold Vari X III 3.5x10 Armalite mount 35.5" OAL 7.2 lbs empty Larry |
|
http://farm3.static.flickr.com/2270/2963196584_e108bbd697.jpg?v=0 hey guys, first post ever! operator 16" sabre lower, bcm bolt etc. cmt upper light plastic hand guard with hack job stubby fore grip looking forward to getting a denny's lower for it! |
Thanks for all the pics folks  My new design lowers are on the way. I got the call today Be ready for something new. 
|
|
Quoted:
You had to go and do that Denny... I guess I'm just gonna have to use one for my 6.8 build. When do we get to see the new stuff??? They shipped my way via Priority Mail Thursday so if they hit the shop Saturday Mike will call me and I will come down and shoot some pictures. 
|
|
Quoted:
You had to go and do that Denny... I guess I'm just gonna have to use one for my 6.8 build. When do we get to see the new stuff??? They shipped my way via Priority Mail Thursday so if they hit the shop Saturday Mike will call me and I will come down and shoot some pictures.
|
|
Quoted:
Well we're waiting! It's been five days, and still no pictures. We want to see the "New Stuff".  Here ya go
Denny's Guns lower receiver. My new lower receiver. Check out the features in the full description. It is unique with the features you want. Features: Forged from 7075 T6 Aluminum Milspec type III Hard Coat Anodizing Super Clean Machining for great looks EDM Magazine well, smooth and in spec. Set screw to adjust upper receiver tension. Fits my CMT/Stags perfect Low Shelf Marked SAFE and SEMI both sides. Denny's Guns Logo No Caliber Marking CNC Machined on the latest upto date equipment for superior accuracy. All markings are Laser Engraved for clarity and consistancy Check out all the pictures to see the quality of this lower. It may be the best lower on the market. Shown here with a CMT/Stag upper for color comparison. These lowers are black. 
The new logo 
Side view with CMT/Stag upper 
Low shelf 
Upper receiver tensioning screw so you can set you upper tight as you want. 
My magazine wells are cut with an EDM for absolute accuracy and smoothness. 
$149.95 INTRO PRICE $144.95 Oh yeah, did you notice the finish is flawless 
LINK TO THE LOWERS ON THE WEBSITE The usual disclaimer: You need to be or go thru your FFL Dealer to purchase these. 
|
|
Specs:
Smith Vortex FH Noveske PAC NOR Recon Barrel (Countored and Bead Blasted) 16.1" DD Lite 9.0 Rail Surefire G2 in VLTOR SCOUT MOUNT w/ Malkoff M60 Trijicon TA31F in Larue 4XDOS with TA57 Killflash CMT upper Denny's Billet Lower Bill Springfield 3# trigger with speed hammer Magpul MIAD and VLTOR EMOD GG&G ambi sling plate Yankee Hill front and Matech rear BUIS 
WHADDAYA THINK? FUG and Bipod? or keep it light and fast? |
|
Quoted:
Specs: Smith Vortex FH Noveske PAC NOR Recon Barrel (Countored and Bead Blasted) 16.1" DD Lite 9.0 Rail Surefire G2 in VLTOR SCOUT MOUNT w/ Malkoff M60 Trijicon TA31F in Larue 4XDOS with TA57 Killflash CMT upper Denny's Billet Lower Bill Springfield 3# trigger with speed hammer Magpul MIAD and VLTOR EMOD GG&G ambi sling plate Yankee Hill front and Matech rear BUIS http://i490.photobucket.com/albums/rr270/hmaverick16/DSCF1932.jpg http://i490.photobucket.com/albums/rr270/hmaverick16/DSCF1935.jpg WHADDAYA THINK? FUG and Bipod? or keep it light and fast? Very nice Denny's lower build.
Yes, definately the LaRue FUG VFG, at least if it bothers you it could be quickly detached. I have a Bobro Gen 1 bipod but I don't like to mount it on my rail, I don't use it much except for checking zero, it stays in my pack most of the time just in case I need it. |
|
VCQB 11.5 INCH S.S BARREL, DOUGLAS PREMIUM, 1:7, M4 RAMPS, ION BOND FINISH (global tactical)
CMT Upper receiver Young MFG Chrome BCG Larue Tactical 9.0 rail LT low profile gas block Troy front & rear flip up iron sights Trijicon ACOG TA33R-8 w/ LT 105 QD Mount Magpul MIAD grip Magpul Mil-spec CTR w rubber pad Blue Force Gear Vickers Combat Application Sling (VCAS) w/ sewn in QD YHM QD suppressor attachment Got the barrel, upper, bcg, LT gas block from denny. 
|
|
Quoted:
VCQB 11.5 INCH S.S BARREL, DOUGLAS PREMIUM, 1:7, M4 RAMPS, ION BOND FINISH (global tactical) CMT Upper receiver Young MFG Chrome BCG Larue Tactical 9.0 rail LT low profile gas block Troy front & rear flip up iron sights Trijicon ACOG TA33R-8 w/ LT 105 QD Mount Magpul MIAD grip Magpul Mil-spec CTR w rubber pad Blue Force Gear Vickers Combat Application Sling (VCAS) w/ sewn in QD YHM QD suppressor attachment Got the barrel, upper, bcg, LT gas block from denny. http://www.poto-oil.com/photography/firearm/sbr0309-02.jpg http://www.poto-oil.com/photography/firearm/sbr0309-01.jpg http://i6.photobucket.com/albums/y204/freakinout/DSC_0509.jpg Thats pure perfection.  Nice rifle mate
|
|
Quoted:
Quoted:
VCQB 11.5 INCH S.S BARREL, DOUGLAS PREMIUM, 1:7, M4 RAMPS, ION BOND FINISH (global tactical) CMT Upper receiver Young MFG Chrome BCG Larue Tactical 9.0 rail LT low profile gas block Troy front & rear flip up iron sights Trijicon ACOG TA33R-8 w/ LT 105 QD Mount Magpul MIAD grip Magpul Mil-spec CTR w rubber pad Blue Force Gear Vickers Combat Application Sling (VCAS) w/ sewn in QD YHM QD suppressor attachment Got the barrel, upper, bcg, LT gas block from denny. http://www.poto-oil.com/photography/firearm/sbr0309-02.jpg http://www.poto-oil.com/photography/firearm/sbr0309-01.jpg http://i6.photobucket.com/albums/y204/freakinout/DSC_0509.jpg Thats pure perfection. Nice rifle mate Thanks! 
|
|
Quoted: Quoted: That's what I like to see  http://i6.photobucket.com/albums/y204/freakinout/larue/poto1208-03.jpg Nice....Got a pic of that with the can on? |
|
Quoted:
Quoted:
Quoted:
That's what I like to see http://i6.photobucket.com/albums/y204/freakinout/larue/poto1208-03.jpg Nice....Got a pic of that with the can on? Ooooh I wish I did. Been waiting on my can for months..... 
|
|
http://s726.photobucket.com/albums/ww262/HS2/IMG_0015_a.jpg
Still a work in progress. Denny's upper with Noveske 16 SS barrel and DD Lite rail. |
RRA lower w/DPMS LPK BCM M4 stock w/6-position milspec buffer tube, spring, H-buffer CMT upper from BCM M&A Parts M16 carrier CMT chrome bolt with extra-power Wolff extractor spring, black buffer, and D-Fender o-ring MagPul MBUS TangoDown Rifle Grip LaRue LT-104 mount VLtor sling-loop reciever endplate QD sling, homemade, looped in the rear, QD-swiveled in the front LaRue 9.0 Forend Bushnell Elite 6500 2.5-16x50 Denny's Operator 16" barrel AAC Blackout FH High Standard charging handle Surefire 6P with Malkoff LED head in a 1" Millett ring 10 shots of PRVI 75-grain Match, just under 2.6 inches at 262 yards.
Thus far it has functioned 100% with wolf 55 grain, federal 55 grain value pack, PRVI M193, and PRVI 75 grain Match. |
|
Here's mine:
Denny's Ion bond upper and lower 16" mid-length Ion bond Recon barrel DD Lite rail 14" Primary Weapons FSC Jewell 2 stage trigger PRI front/back sights Micro T-1 on DD offset mount 
With new stock (it matches very well with the magpul FDE but the flash made it look a lot lighter): 
I'll post new pictures next week as my ACOG TA31H with larue mount comes in...
By the way, this thing is a shooter! Thanks Denny! |
|
Upper Specs:
Denny's Operator 16.1" barrel WOA middy gas tube BCM upper PRI gas block DD Lite 10.0 Young Mfg NM M16 BCG BCM extractor upgrade LMT charging handle LaRue SPR-E Burris XTR-14 MBUS buis F/R ADCO services: Free-Float Assembly Pinned gas block Contour barrel lightweight under the guards re-park barrel Lower Specs: RRA complete lower RRA 2stg NM trigger Bill Springfield #4 trigger job JP yellow springs RRA winter trigger guard Magpul MIAD FDE BCM milspec buffer tube assembly Magpul MOE stock FDE LMT H2 buffer Vltor ambidextrous sling mount end plate Troy single-point sling BFL logo sticker Weight: 9lb 1oz empty mag 9lb 13.8oz ready to rock Pics: 
|
|
Great excellent cool builds guys!
Keep 'em pics coming.
My new LMT Tactical CH from Denny on my LMT carbine 
With the Troy BUIS flipped up 
My old (also from Denny) Badger gen 2 tac latch installed my LMT CH which I replaced with the new LMT tac CH 
Here's the full view of my LMT carbine, most Magpul components, KNS, LaRue EOTech QD mount and the Troy BUIS I got also from Denny Specs: LMT Defender 2000 16" carbine LMT M16 BCG with BCM extractor upgrade kit LMT H buffer KAC M4 RAS rails Surefire M951C weaponlight Magpul MIAD grip, trigger guard, XTM rail panels, & PMAGs LMT ambi selector KNS pins Norgon ambi mag catch Troy BUIS Vltor Clubfoot Modstock Aimpoint M2 on LaRue canti QD mount (old pic shown EOTech 551 on LT QD mount) Gear Sector GS-2P two point modular sling The new LMT tac CH are great, not too big, not too small, just the right size and the edges are rounded not sharp like my old Badger gen 2 latch plus it doesn't poke your mag chest rig, I'm very satisfied with it and I'm getting some more when available for spares. I was glad I got one of this bad boy from Denny when he got them in, the MSRP of these are now $47.60 but Denny sold these at the old price of $26.95 (savings of $20.65 - 43%) and shipped them very fast, they were so popular he only had them for less than a couple of hours before they were all gone. Last Tuesday I was on my lunch break and was just checking my e-Mail, quickly looked at AR15.com and saw the thread that said these new CH are posted on the GTS site, I ordered mine 1 pm (PT) and I got it on Thursday 11 am (PT), wow that was the fastest order I got from them I usually get my orders from 3 to 4 days. Thanks to the GTS team for a very fast and great service. |
|
Denny at Denny's Guns/Global Tactical makes it happen. 7 months in the making putting this baby together!
AC 
LaRue Stealth lower Rock River parts kit Wolff spring kit Magpul MIAD Giessele DMR trigger Magpul UBR butt stock Enidine hydraulic buffer + Wolff buffer spring LaRue Stealth billet upper w.M4 feed ramps Young National Match M16 bolt carrier LMT enhanced bolt Badger Gen.2 tactical latch on CMT charge handle Denny's Guns 18" Krieger 1/7.7 stainless SPR barrel mid-gas LaRue low profile gas block LaRue SPR scope mount Nightforce NXS 1-4x24 scope with FC reticle Troy front and rear BUIS's Vickers padded sling GG&G front sling mount DD HD QD swivels Surefire FH556-212A flash hider |
|
Denny built this upper for me:
Ion bond upper and lower Denny's Recon barrel DD Lite 14" rail PWS FSC Brake/flash hider PRI sights Jewel 2 stage trigger This gun can shoot! Just got my ACOG TA31H from Larue yesterday to go along with my T-1. This thing kicks ass! My Larue FUG and Surefire G2 with Larue mount get here next week. Enjoy! 
|
AR Sponsor