AK Sponsor
Joined:
Jun 2022
Posts:
9
EE: 0% (0)
MT, USA
Posted: 7/23/2022 12:55:52 AM EDT
|
Has anybody here tried this M4 stock adaptor on their PSAK GF5? This is the adaptor in question, https://shop.akoperatorsunionlocal4774.com/AK-M4-Stock-Adapter-AK-M4-Stock-Adapter.htm Here is a look at the rear trunnion from above,  I emailed Rob about it, but he had not tried it with the GF5 rear trunnion, so he could not confirm either way. Thanks in advance for any insights here. Shane |
Joined:
Jun 2022
Posts:
10
EE: 0% (0)
MT, USA
|
I had one of my GF3. But since sold the rifle, so I can't verify it's the same trunnion. But the PSA looks like a regular trunnion, just shorter. You might have some extra screw length hanging out once tightened, but it should work. Standard rear trunnion  Here's my old GF3 w/DA stock adaptor 
|
Joined:
Jun 2022
Posts:
11
EE: 0% (0)
MT, USA
|
Originally Posted By dump1567: I had one of my GF3. But since sold the rifle, so I can't verify it's the same trunnion. But the PSA looks like a regular trunnion, just shorter. You might have some extra screw length hanging out once tightened, but it should work. Standard rear trunnion https://cdn3.volusion.com/hjhtn.hslse/v/vspfiles/photos/CSS-AK47-REAR-TRUNNION-2.jpg?v-cache=1629287549 Here's my old GF3 w/DA stock adaptor https://i.imgur.com/Y2tEtrQ.jpg Thanks for the info and pics. I think I'll roll the dice and order one. |
Joined:
Jun 2022
Posts:
12
EE: 0% (0)
MT, USA
AK Sponsor