AK Sponsor
Posted: 2/27/2007 9:27:55 PM EDT
|
Ladies and gentlemen, If you have any helpful links to AK building tools please post them here. I attempted to clean up the old thread, but by the time I cleaned out the dead links there was nothing left. Dale |
Never argue with an idiot. People may not be able to tell you apart.
Minutus cantorum, minutus balorum, minutus carborata descendum pantorum
كافر
Minutus cantorum, minutus balorum, minutus carborata descendum pantorum
كافر
|
Receiver Tools DPH ARMS falt bending Jig AK builder flat bending Jig AK builder Spot Welder Tong Barrel Tools- AK builder Barrel Press Kit Rivet tools- AKparts.com Rivet Squeezer AK builder trigger gaurd jig www.ak-builder.com/ak/modules.php?name=Content&pa=showpage&pid=16]AK builder rivet jig www.ak-builder.com/ak/modules.php?name=Content&pa=showpage&pid=59]AK builder rivet removal tool |
|
www.gunthings.com "AK Front Trunion Press Fixture" to support trunion when pressing in the barrel. $28 I have every jig & tool that AK-Builder makes, but this one works MUCH better & easier than his trunion support jig (although his will work for any trunion & this one needs some mods to work on everyting). Works GREAT on Romys, Polish, Hungarian, & Bulgarian trunions. Haven't tried it on a Yugo... |
| Does anyone know where to get a rivet squeezer that does NOT require a press that will work with the triggerguard rivets and the long rear rivets?!? Is it even possible to do these without a press? Whats the SOP on doing these? |
Originally Posted By Mr_Happyface:
I'd say it'd be pretty damn irresponsible for you guys to bury yourselves with weapons.
The LAST thing we need is armed zombies. That would take the fun out of the whole thing.
I'd say it'd be pretty damn irresponsible for you guys to bury yourselves with weapons.
The LAST thing we need is armed zombies. That would take the fun out of the whole thing.
|
Here's a guy that makes a spotwelder tong for less. He's a buddy of mine, and I seen it weld it does a great job. www.gunsnet.net/forums/showthread.php?t=310106&highlight=welder+tong <Made your link hot> |
|
To get those long rear (or long Yugo front) rivets: Air hammer rivet tools! 1/8" diameter rivet tool 5/32" rivet tool  |
The Amazing All thread Barrel Press!!!!  Any other method is just Insanity
Allthread Barrel Press |
| I've designed and built a jig for locating the rear trunion rivets and a jig for the front trunion rivets. Both jigs act as a drill guide. The front trunion jig also acts as a clamp to hold the receiver and trunion in place as you check the mag lockup. I haven't made any in a long time, but I can make some more if there is any interest. |
|
I wanted to give you guys a link to my website. The site is still under construction and doesnt have a shopping cart yet. My contact info is on the site. I make and sell AK bending jigs. www.reed-engineering.net |
|
Originally Posted By sardo_67:
where can i buy the bolt cutter type rivet squeezer +1 |
Disclaimer: I do not work for Tactical Machining, Daniel Defense, Centurion Arms, Noveske, Colt, VLTOR, AO Precision, Magpul, Giessele, Troy, Eotech, Harris, YHM, BCM, Stag, Sharp's, Lothar Walther, LMT, Tapco, or Walmart. Got all that, Sherlock?
|
Originally Posted By sardo_67:
where can i buy the bolt cutter type rivet squeezer http://www.ak47tools.com/ I got mine from here. It works great. |
|
Originally Posted By hate_machine:
i just bought the short rivet jig from gunthings.com. way much nicer than the POS i homemade years ago out of junk iron when kits were cheap and could afford to mess them up. after using it on a $400 polish kit, it's worth every penny!! Is your project finished? I am beginning to play with the idea, that maybe I can build an AK of my own and started gathering any info and pictures and reading as much as I can. Post any pics if you can. Thankx |
|
Great resource for some very specific build tools. If you are going to build a lot of AKs some of these tools are lifesavers. https://robertforbus.com/ |
Joined:
Nov 2022
Posts:
2
EE: 0% (0)
NJ, USA
AK Sponsor